Thermilate InsOpaint Anti-Condensation Paint
Thermilate InsOpaint Anti-Condensation Paint is a premium quality acrylic paint with very low odour levels and maximum thermal insulation performance that is perfect for all interior walls and ceilings and provides a U-value improvement of 0.25 W/m2K. Fights condensation problems including mould, blistering paint, discolouration, staining and peeling wallpaper.
Thermilate InsOpaint Anti-Condensation Paint is a premium quality acrylic paint with very low odour levels and maximum thermal insulation performance that is perfect for all interior walls and ceilings and provides a U-value improvement of 0.25 W/m2K. Thermilate InsOpaint Anti-Condensation Paint is the best painting and decorating option when fighting condensation problems including mould, blistering paint, discolouration, staining and peeling wallpaper. With just 2 coats, Thermilate InsOpaint Anti-Condensation Paint provides thermal insulation and long lasting mould resistance that protects from continuous and severe condensation. It can be used both as a wall paint and a ceiling paint in kitchens and bathrooms in homes, hotels, schools, universities, restaurants, service stations, gyms, swimming pools and spas.
Thermilate InsOpaint Anti-Condensation Paint covers up to 3.5m² per litre with the recommended minimum of two coats. It is easily applied by brush, roller or spray. Thermilate InsOpaint Anti-Condensation Paint has a distinct energy-saving advantage and has been scientifically proven to work. A minimum of two coats are recommended for interior walls to achieve maximum thermal insulation and three coats for exterior walls. You can wallpaper over Thermilate InsOpaint Anti-Condensation Paint and it will continue to work, a 5L will cover up to 17m² with 2 coats.
Thermilate InsOpaint Anti-Condensation Paint qualities are not diminished when painted on top of lining paper, wallpaper already painted with another emulsion and non-blown vinyl wallpapers. It should not however be applied to “blown vinyl” wallpapers which absorb the paint and leave the insulating micro technology as a residue which will later become dispersed. New plaster should be sealed with an adequate primer/sealer prior to application of Thermilate InsOpaint Anti-Condensation Paint.
Features & Benefits
• Heat loss reducing insulating paint.
• Reduces severe condensation problems.
• Durable anti mould paint.
• Can be used as wall paint as well as ceiling paint.
• Less energy needed reduces heating bills.
• Helps prevent unsightly toxic mould.
• Lowest cost wall & ceiling thermal insulation.
• Water based acrylic paint, therefore eco-friendly.
• Easy to use for all.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 7m² per litre
- Touch Dry
- 1 Hour
- Brush, Roller, Spray
|Teddy on 08/03/2019|| |
Hi we have walls which had damp highreadings when surveyed but they have no signs of damp . I am told the walls are ‘cold’ and this is causing the readings.The walls were damp proofed 30 years ago . Would this paint 1. Protect against damp b. Help provide insulation to show less damp readings when inspected again.
Thermilate InsOpaint Anti-Condensation Paint helps to provide thermal insulation to surfaces it is applied to, it is not a damp proofing product. The product should help to reduce how cold to the touch the walls are currently, which in turn should help reduce any condesation build up you're currently having.
|Helen Ford on 27/12/2018|| |
Hi, I want to paint my shower room with this paint but ten paint over the top with a normal bathroom paint for the colour. Will this be ok? will the walls still have their protection from condensation? Thanks
Yes, Thermilate InsOpaint Anti-Condensation Paint can be over painted.
|Mark cole on 31/10/2018|| |
I have a problem with an inside wall with condensation. I have had a company fit a vent. Want to decorate, am wondering with this paint would be a good addition.
Yes, Thermilate InsOpaint Anti-Condensation Paint would be an excellent choice in this situation.
|MOLLY NDLOVU on 27/07/2018|| |
my basement has condensation after reading a lot information i have condensation problems . it was boarded plastered but has black moulds . i am certain now that i need anti mould products but will they work over plastered plaster board
Plasterboard with skim over it is fine as a substrate to paint, we would refer you to our blog post: How to Paint Over Mould for more information.
|Spencer may on 30/06/2018|| |
Hi I am looking to buy this thermolite insopaint anti condensation. But I have heard conflicting views on wether when applied the type of finish, I am looking for a smooth finish but heard this finish is rough like sandpaper. What would be your opinion?
We wouldn't say it had a finish like sandpaper but the finished paint surface will have a slight texture to it due to the thermal additive the paint contains.
|Philip on 29/01/2018|| |
Can this paint be used on metal - and if so what if any undercoat do you recommend?
No but Coo-Var Anti-Condensation Paint is a water based product that has been developed for application to walls and ceilings to help prevent condensation forming on the surface. For application to metal the surface needs to be primed first with an anti-corrosive metal primer such as Coo-Var Water Based All Metals Primer then followed by 2 coats of Coo-Var Anti-Condensation Paint. If the metal is insulated, then taping up the seams will probably be more effective.
|Lynn on 15/11/2017|| |
Question: HI Can you paint Thermilate InsOpaint on top of internal sandstone kitchen and bathroom window mullions Lynn
|Mickele Perretta on 28/07/2017|| |
Question: Hi Can Thermilate InsOpaint be painted over with an emulsion paint ? Regards Mr M Perretta
|James on 13/06/2017|| |
Question: I have two questions please. 1- Can I use this directly on exposed plaster (I've already sanded off some old paint which had been affected by mould - condensation related rather than damp I believe)? 2- Does this product contain any anti-mould chemicals to stop mould growing, or is it just designed to prevent condensation? Thanks
New plaster should be sealed with an adequate primer/sealer prior to application of Thermilate InsOpaint Anti-Condensation Paint. The paint is designed to help prevent condensation forming on the surface which in turn should inhibit mould growth but if you wish to have an active fungicidal finish you should overcoat with Zinsser Perma-White Interior.
|Pete on 10/12/2016|| |
Question: Is this paint suitable for a galvanised steel garage roof?
Assuming you wish to use this product on the interior, underside of the roof then it can be applied to galvanised steel as long as you first prime with Zinsser Bulls Eye 1-2-3.
Clean the galvanised surfaces down with Methylated Spirits, apply 1 coat of Zinsser Bulls Eye 1-2-3 followed by Thermilate InsOpaint Anti-Condensation Paint as required.
|Caroline Stretton on 27/09/2016|| |
Question: Hello, Can you confirm whether or not Thermilate InsOpaint Anti-Condensation Paint is vegan? I.e. Does it contain any animal-derived products? Thanks, Caroline
The manufacturer has confirmed no animal-derived products are used for the manufacture of this product.
|Geoff Tisdall on 11/02/2016|| |
Once applied and dried can Thermilate InsOpaint Anti-Condensation Paint be over painted with a water based emulsion like Farrow & Ball?
Yes, a minimum of two coats are recommended for interior walls to achieve maximum thermal insulation and three coats for exterior walls. You can then wallpaper or paint over Thermilate InsOpaint Anti-Condensation Paint and it will continue to work.
|Gloria Thomson on 22/12/2015|| |
Can the Thermilate InsOpaint Anti-Condensation Paint be used inside my built in wardrobes? They are on a gable end wall and can get mould and mildew, I have tried lots of different solutions.
Yes definitely, we have had customers use it inside wardrobes before with good results.
The Sika HD20 Membrane is a high-density polyethylene, high capacity cavity drainage membrane principally for use on floors, providing high water flow with a deep stud profile designed to resist blockages caused by lime deposits. Ideally suited by heavy duty use on floors, impermeable to water, gas and vapour, fast track installation, can be over-screeded...
The Sika Plaster Drainage Membrane is a 5mm high-density polyethylene cavity drainage studded membrane used for internal fixing to masonry, stone or concrete walls. Suitable for over-plastering/rendering with sand/cement or with Sika Whitewall one coat anhydrite plaster. Easy to cut, fix and seal, unique undercut stud design creates mechanical key for...
SikaMur InjectoCream 100 is a new concept for the control of rising damp. It is a water repellent, silane-based emulsion. A simple application gun is used to inject the cream into a series of holes drilled into a mortar course. Once injected to the mortar course, SikaMur InjectoCream 100 will diffuse within the damp wall to form a water repellent barrier...
Coo-Var Anti-Condensation Paint is a quick and easy protection of one-off areas that helps prevent the formation of condensation. ADVANTAGES Prevents the formation of condensation Inhibits unsightly mould growth Can be a finish or coated with emulsion or acrylic Interior use Biocide reduces discolouration
Nu-Flame FR Anti-Bacterial Colourcoat is an Anti-Microbial finish with flame retardant properties. Protects against many commonly found bacteria (e.g. Salmonella and MRSA). Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations. Advantages Flame retardant Contains an active Anti-Microbial For walls and...
SikaProof P-12 is a fully and permanently bonded, self-adhesive, post-applied, composite sheet membrane waterproofing system for reinforced concrete structures. It consists of a flexible polyolefin (FPO) based membrane that is pre-coated with an adhesive sealant layer so that the membrane system is self-adhesive. It is cold- and post-applied, without heat...
Sika BituSeal Primer is a bitumen solution primer to be used in conjunction with Sika BituSeal S-115 to increase adhesion and bond to the substrate. High adhesion and bonding ability on various substrates, good binding ability for dust and loose particles, ready to use by brush, roller or spray.
Rust-Oleum 5090 Anti-Condensation Paint is a water absorbing coating to be used on ceilings and the upper parts of walls, where steam or water vapour formation occurs, in order to prevent condensation and dripping. It is intended as a one coat, airless application, but a more textured finish can be obtained by applying 2-3 coats.
Remmers Color SA plus is a high quality, interior wall paint with micro-silver as a film preservative against bacteria & mould. A high quality interior coating that is used in rooms that are at risk for mould or are already infested, e.g. in living rooms and bedrooms, hospitals, children's rooms, schools, kindergartens, offices, storage rooms, hotels,...
Sika Drain 850 Geo is a heavy duty drainage and protection sheet used as a protection and drainage sheet for preformed sheet membrane waterproofing systems, liquid applied membranes and with the Sika White Box concept for waterproofing retaining walls and heavy duty roofs/podiums.
SikaProof A05, SikaProof A08 and SikaProof A12 are fully and permanently bonded, self-adhesive, composite sheet membrane waterproofing systems for reinforced concrete of the main structure. It consists of an embossed polyolefin (FPO) membrane laminated with a sealant grid and a non-woven fleece. Damp-proofing, concrete protection and waterproofing for...
Coo-Var Anti-Damp Paint is a white, special low odour, efflorescence resistant, resin-based paint for application to damp interior walls and ceilings. Designed as a primer coat. ADVANTAGES Combines with surface moisture and dampness Preserves dry film Reduces discolouration Can be applied to surfaces still slightly damp Can be...
Zinsser Perma-White paint is a durable, water-based, very low odour finish containing a biocide that protects the dried coating against mould and mildew - guaranteed for 5 years. It is ideally suited for any area of persistent high humidity, frequent temperature changes and poor air circulation.
Rust-Oleum Dacfill Frigo is a gas & vapour tight coating for walls and ceilings, ideal for use in cold stores. Rust-Oleum Dacfill Frigo has high vapour and gas tightness with permanent high elasticity of up to 400%. It offers resistance against sudden variations in temperature and exhibits high mechanical strength.