SikaProof A Edge is a preformed L-shaped SikaProof A membrane sheet in 1m width folded in 50/50cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Used for damp-proofing, concrete protection and waterproofing for basements and other below ground concrete structures against ground...
Sika Drain 850 Geo
Sika Drain 850 Geo is a heavy duty drainage and protection sheet used as a protection and drainage sheet for preformed sheet membrane waterproofing systems, liquid applied membranes and with the Sika White Box concept for waterproofing retaining walls and heavy duty roofs/podiums.
Sika Drain 850 Geo is a heavy duty drainage and protection sheet produced from high density polyethylene (HDPE) with dimples 10mm high and a filtration layer of geotextile (PP) bonded on the top.
As a protection and drainage sheet for preformed sheet membrane waterproofing systems, liquid applied membranes and with the Sika White Box concept for waterproofing retaining walls and heavy duty roofs/podiums.
Features & Benefits
- High drainage capacity
- High mechanical/impact resistance
- Integral filtration layer
- Resistant to all natural aggressive mediums in ground water and soil
- Suitable for contact with soft water (aggressive to concrete)
- Can be installed on damp and wet substrates Sika Drain 850 Geo forms a drainage channel in the space between the structural elements and the backfilling/soil/substrate to allow water to be drained away
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
The Sika CD Anti-Lime Coating is a blend of high-grade silicates and wetting agents, held in suspension with water as a carrier. Once applied to the concrete surface, this unique product seals the concrete surface. Reduce “Free Lime” leaching from concrete surfaces, an effective Anti-lime coating to new concrete in Cavity Drain systems. Totally seals the...
Rust-Oleum Dacfill Frigo is a gas & vapour tight coating for walls and ceilings, ideal for use in cold stores. Rust-Oleum Dacfill Frigo has high vapour and gas tightness with permanent high elasticity of up to 400%. It offers resistance against sudden variations in temperature and exhibits high mechanical strength.
SikaMur InjectoCream 100 is a new concept for the control of rising damp. It is a water repellent, silane-based emulsion. A simple application gun is used to inject the cream into a series of holes drilled into a mortar course. Once injected to the mortar course, SikaMur InjectoCream 100 will diffuse within the damp wall to form a water repellent barrier...
An exterior paint which produces a tough, durable finish with up to 15 years performance, designed to resist cracking, fading, peeling and blistering. It contains a biocide to protect the dried coating against fungal degradation.
Rust-Oleum 5090 Anti-Condensation Paint is a water absorbing coating to be used on ceilings and the upper parts of walls, where steam or water vapour formation occurs, in order to prevent condensation and dripping. It is intended as a one coat, airless application, but a more textured finish can be obtained by applying 2-3 coats.
Zinsser Perma-White paint is a durable, water-based, very low odour finish containing a biocide that protects the dried coating against mould and mildew - guaranteed for 5 years. It is ideally suited for any area of persistent high humidity, frequent temperature changes and poor air circulation.
Coo-Var Anti-Condensation Paint is a quick and easy protection of one-off areas that helps prevent the formation of condensation. ADVANTAGES Prevents the formation of condensation Inhibits unsightly mould growth Can be a finish or coated with emulsion or acrylic Interior use Biocide reduces discolouration
The Sika Cavity Drainage System utilises a high density polypropylene internal drainage membrane, the system is installed loose laid in flooring applications and attached to the wall with surface plugs in vertical installations. Here you can find the associated accessories used with the Sika Cavity Drainage System.
Remmers Color SA plus is a high quality, interior wall paint with micro-silver as a film preservative against bacteria & mould. A high quality interior coating that is used in rooms that are at risk for mould or are already infested, e.g. in living rooms and bedrooms, hospitals, children's rooms, schools, kindergartens, offices, storage rooms, hotels,...
Sika MonoTop 109 WaterProofing Mortar is a one-component cement based premixed mortar with brushable consistency. Ready to use (just add water), high quality, thin waterproof slurry coating, based on special cements and admixtures to provide a water resistant and damp-proof finish. Suitable for preventing dampness and water penetration in basements,...
Sika BituSeal S-115 is a post applied self-adhesive waterproofing sheet membrane. It is based on SBS (styrene-butadiene-styrene) modified bitumen, reinforced with polyester non woven fabric. It has a silicone-treated release liner on the upper and lower surface. Sika BituSeal S-115 is designed for use as an underlayer in fully self-adhesive multi-ply...