Alternatively you can email our sales & support team on [email protected]
Sika Standard Drainage Membrane
115336
The Sika Standard Drainage Membrane is an 8mm polypropylene studded membrane used for internal fixing to masonry, stone or concrete walls, dry lined walls, and as a floor membrane where limited water passage is anticipated.
Provides a fast track waterproofing solution for walls or floors, suitable for use above and below ground, impermeable to water, gas and vapour.
Features and Benefits
Fast track waterproofing solution for walls or floors
Mechanical fixing plugs suitable for dry lining
Suitable for use above and below ground
Impermeable to water, gas and vapour
Can be installed in conjunction with Sika CD Channel and Pump System
The Sika Cavity Drainage System consists of moulded high-density polyethylene and polypropylene membranes and fixing/sealing materials used as a water diversion system in the refurbishment or new construction of domestic and commercial buildings.
The Sika Standard Drainage Membrane is an 8mm polypropylene studded membrane.
Uses
Internal fixing to masonry, stone or concrete walls
Dry lined walls
Floor membrane where limited water passage is anticipated
Features & Benefits
Fast track waterproofing solution for walls or floors
Mechanical fixing plugs suitable for dry lining
Suitable for use above and below ground
Impermeable to water, gas and vapour
Can be installed in conjunction with Sika CD Channel and Pump System
Can be over-screeded when used on floors
Easily cut and installed
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
The Sika Cavity Drainage System utilises a high density polypropylene internal drainage membrane, the system is installed loose laid in flooring applications and attached to the wall with surface plugs in vertical installations.
Other associated products include;
Sika Standard Drainage Membrane
Sika Plaster Drainage Membrane
Sika HD20...
Coo-Var Anti-damp Paint is a white, special low odour, efflorescence resistant resin based paint for application to damp interior walls and ceilings. Designed as a primer coat containing an active reagent which combines with surface moisture and dampness. Contains a biocidal product for the preservation of the dry film and to reduce...
Sika Drain 850 Geo is a heavy duty drainage and protection sheet used as a protection and drainage sheet for preformed sheet membrane waterproofing systems, liquid applied membranes and with the Sika White Box concept for waterproofing retaining walls and heavy duty roofs/podiums.
Features and Benefits
High drainage capacity
High...
SikaProof P-12 is a fully and permanently bonded, self-adhesive, post-applied, composite sheet membrane waterproofing system for reinforced concrete structures.
It consists of a flexible polyolefin (FPO) based membrane that is pre-coated with an adhesive sealant layer so that the membrane system is self-adhesive. It is cold- and post-applied,...
A waterproofing paint that is guaranteed to keep water out and contains a biocide that protects the dried coating against fungal degradation for a minimum of 5 years. This waterproof masonry paint can easily be applied to wet or dry surfaces creating a smooth, non-gritty finish.
Available in 45+ colours (5L only)
Coverage Calculator
Rust-Oleum 5090 Anti-Condensation Coating is a water absorbing coating to be used on ceilings and the upper parts of walls, where steam or water vapour formation occurs, in order to prevent condensation and dripping. It is intended as a one coat, airless application, but a more textured finish can be obtained by applying 2-3 coats by brush or...
Rust-Oleum Dacfill Frigo is a gas & vapour tight coating for walls and ceilings, ideal for use in cold stores. Rust-Oleum Dacfill Frigo has high vapour and gas tightness with permanent high elasticity of up to 400%. It offers resistance against sudden variations in temperature and exhibits high mechanical strength.
Ideal for cold stores...
Blackfriar Interior Seal Damp is a clear coating which prevents damp patches from spoiling interior decoration. Formulated for use on surfaces such as plaster, brickwork, cement and mortar. Penetrates and seals surfaces against damp.
Product Details
Good penetration.
Blocks and seals damp.
Ideal for pre-decoration.
Use on plaster, brick...
Blackfriar Anti-Mould Solution kills mould and inhibits regrowth. Use it inside and out to eliminate unsightly mould prior to decorating on many surfaces including tiles, plaster, wallpaper, paving slabs and slate.
Product Details
Powerful mould killing solution.
Use on tiles, plaster, wallpaper, paving slabs, marble and more.
Odourless....
Nu-Flame FR Anti-Bacterial Colourcoat is an Anti-Microbial finish with flame retardant properties. Protects against many commonly found bacteria (e.g. Salmonella and MRSA). Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations.
Advantages
Flame retardant
Contains an active Anti-Microbial
For...
SikaMur InjectoCream 100 is a new concept for the control of rising damp.
It is a water repellent, silane-based emulsion. A simple application gun is used to inject the cream into a series of holes drilled into a mortar course. Once injected to the mortar course, SikaMur InjectoCream 100 will diffuse within the damp wall to form a water...
Zinsser Perma-White paint is a durable, water-based, very low odour finish containing a biocide that protects the dried coating against mould and mildew - guaranteed for 5 years. It is ideally suited for any area of persistent high humidity, frequent temperature changes and poor air circulation.
Available more than 350 colours from RAL and...
The Sika Plaster Drainage Membrane is a 5mm high-density polyethylene cavity drainage studded membrane used for internal fixing to masonry, stone or concrete walls.
Suitable for over-plastering/rendering with sand/cement or with Sika Whitewall one coat anhydrite plaster.
Features and Benefits
Easy to cut, fix and seal
Unique undercut...
SikaProof A Edge is a preformed L-shaped SikaProof A membrane sheet in 1m width folded in 50/50cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections.
Used for damp-proofing, concrete protection and waterproofing for basements and other below ground concrete structures...
The Sika CD Anti-Lime Coating is a blend of high-grade silicates and wetting agents, held in suspension with water as a carrier.
Once applied to the concrete surface, this unique product seals the concrete surface.
Reduce “Free Lime” leaching from concrete surfaces, an effective Anti-lime coating to new concrete in Cavity Drain systems....
Coo-Var Anti-Condensation Paint helps prevent condensation forming on walls and ceilings. It contains a biocidal product for the preservation of the paint film and to reduce discolouration.
Product Features
Prevents the formation of condensation
Inhibits unsightly mould growth
Can be a finish or coated with emulsion or acrylic
Interior...
