The Sika HD20 Membrane is a high-density polyethylene, high capacity cavity drainage membrane principally for use on floors, providing high water flow with a deep stud profile designed to resist blockages caused by lime deposits. Ideally suited by heavy duty use on floors, impermeable to water, gas and vapour, fast track installation, can be over-screeded...
Sika CD Anti-Lime Coating
The Sika CD Anti-Lime Coating is a blend of high-grade silicates and wetting agents, held in suspension with water as a carrier. Once applied to the concrete surface, this unique product seals the concrete surface. Reduce “Free Lime” leaching from concrete surfaces, an effective Anti-lime coating to new concrete in Cavity Drain systems. Totally seals the concrete surface.
The Sika CD Anti-Lime Coating is a blend of high-grade silicates and wetting agents, held in suspension with water as a carrier. Once applied to the concrete surface, this unique product seals the concrete surface.
- Reduce “Free Lime” leaching from concrete surfaces
- An effective Anti-lime coating to new concrete in Cavity Drain systems
Features & Benefits
- Totally seals the concrete surface
- Increases abrasion resistance
- Resistant to acid concentrates
- Totally safe – water based
- Normally one coat application
- Equipment can be easily cleaned with water
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 2 - 4m² per kg
- Touch Dry
- 1 Hour
- Brush, Spray
Be the first to ask a question about this product!
The Sika Plaster Drainage Membrane is a 5mm high-density polyethylene cavity drainage studded membrane used for internal fixing to masonry, stone or concrete walls. Suitable for over-plastering/rendering with sand/cement or with Sika Whitewall one coat anhydrite plaster. Easy to cut, fix and seal, unique undercut stud design creates mechanical key for...
SikaProof A05, SikaProof A08 and SikaProof A12 are fully and permanently bonded, self-adhesive, composite sheet membrane waterproofing systems for reinforced concrete of the main structure. It consists of an embossed polyolefin (FPO) membrane laminated with a sealant grid and a non-woven fleece. Damp-proofing, concrete protection and waterproofing for...
The Sika Standard Drainage Membrane is an 8mm polypropylene studded membrane used for internal fixing to masonry, stone or concrete walls, dry lined walls, and as a floor membrane where limited water passage is anticipated. Provides a fast track waterproofing solution for walls or floors, suitable for use above and below ground, impermeable to water, gas...
Sika BituSeal Primer is a bitumen solution primer to be used in conjunction with Sika BituSeal S-115 to increase adhesion and bond to the substrate. High adhesion and bonding ability on various substrates, good binding ability for dust and loose particles, ready to use by brush, roller or spray.
An exterior paint which produces a tough, durable finish with up to 15 years performance, designed to resist cracking, fading, peeling and blistering. It contains a biocide to protect the dried coating against fungal degradation.
Zinsser Perma-White paint is a durable, water-based, very low odour finish containing a biocide that protects the dried coating against mould and mildew - guaranteed for 5 years. It is ideally suited for any area of persistent high humidity, frequent temperature changes and poor air circulation.
Sika MonoTop 109 WaterProofing Mortar is a one-component cement based premixed mortar with brushable consistency. Ready to use (just add water), high quality, thin waterproof slurry coating, based on special cements and admixtures to provide a water resistant and damp-proof finish. Suitable for preventing dampness and water penetration in basements,...
Coo-Var Anti-Damp Paint is a white, special low odour, efflorescence resistant, resin-based paint for application to damp interior walls and ceilings. Designed as a primer coat. ADVANTAGES Combines with surface moisture and dampness Preserves dry film Reduces discolouration Can be applied to surfaces still slightly damp Can be...
Sika BituSeal S-115 is a post applied self-adhesive waterproofing sheet membrane. It is based on SBS (styrene-butadiene-styrene) modified bitumen, reinforced with polyester non woven fabric. It has a silicone-treated release liner on the upper and lower surface. Sika BituSeal S-115 is designed for use as an underlayer in fully self-adhesive multi-ply...
Remmers Color SA plus is a high quality, interior wall paint with micro-silver as a film preservative against bacteria & mould. A high quality interior coating that is used in rooms that are at risk for mould or are already infested, e.g. in living rooms and bedrooms, hospitals, children's rooms, schools, kindergartens, offices, storage rooms, hotels,...
Nu-Flame FR Anti-Bacterial Colourcoat is an Anti-Microbial finish with flame retardant properties. Protects against many commonly found bacteria (e.g. Salmonella and MRSA). Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations. Advantages Flame retardant Contains an active Anti-Microbial For walls and...
Sika Drain 850 Geo is a heavy duty drainage and protection sheet used as a protection and drainage sheet for preformed sheet membrane waterproofing systems, liquid applied membranes and with the Sika White Box concept for waterproofing retaining walls and heavy duty roofs/podiums.
Coo-Var Anti-Condensation Paint is a quick and easy protection of one-off areas that helps prevent the formation of condensation. ADVANTAGES Prevents the formation of condensation Inhibits unsightly mould growth Can be a finish or coated with emulsion or acrylic Interior use Biocide reduces discolouration