Coo-Var Anti-Condensation Paint
  • Coo-Var Anti-Condensation Paint

Coo-Var Anti-Condensation Paint

350/W475/1

Coo-Var Anti-Condensation Paint is a quick and easy protection of one-off areas that helps prevent the formation of condensation.

ADVANTAGES

  • Prevents the formation of condensation
  • Inhibits unsightly mould growth
  • Can be a finish or coated with emulsion or acrylic
  • Interior use
  • Biocide reduces discolouration
Colour
Size
£18.44
VAT excluded

£22.13 Tax incl.
Quantity

Description

Coo-Var Anti-Condensation Paint should be used in areas that are prone to condensation forming. It is a white paint that helps prevent condensation forming (on walls and ceilings). It contains a biocidal product for the preservation of the paint film and to reduce discolouration.

Recommended Uses

  • Walls
  • Ceilings
  • Bathrooms
  • Wet rooms
  • Communal showers
  • Changing rooms
  • Kitchens

Surface Preparation

All surfaces should be clean, dry, sound and free from contaminants and grease. Scrape and brush the surface to remove any loose flaking material. Flat down glossy surfaces with abrasive paper. Treat any mould or lichen with a proprietary mould remover with a scraper or a stiff brush then treat again. Prime bare metal areas with Coo-Var All Metals Primer.

Application

Apply with brush or roller.

Adhere to normal good painting practices.

In confined spaces, provide adequate ventilation during application and drying.

Apply 2 full coats of Coo-Var Anti-Condensation Paint. The final coat may be over coated with emulsion paints.

Do not apply below 10°C.

Recommended Dried Film Thickness Per Coat: 40-50 microns
Recommended Wet Film Thickness Per Coat: 100-125 microns

Estimated Coverage: 8-10m2/litre

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
350/W475/1

Data sheet

Typical Coverage (per coat)
8-10m² per litre
Touch Dry
2 Hours
Application
Brush, Roller
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Simon Leek on 25/01/2019
Question: 

Do you have in stock? How long will delivery take?

Answer: 

Coo-Var Anti-Condensation Paint is a stock item, collection can be made from our trade counter in Leeds or we can offer the following delivery;

3 - 5 Working Days FREE (on orders over £75.00 + VAT, £5.00 + VAT if under)
2 - 3 Working Days £8.00 + VAT
Next Working Day £15.00 + VAT
questions donna cuthbert on 10/07/2018
Question: 

Can anti condensation paint be wall papered over? Thanks.

Answer: 

Yes, but be sure to allow Coo-Var Anti-Condensation Paint to thoroughly dry (5 - 7 days @ 20°C) before applying the wallpaper.

questions Alison King on 04/07/2018
Question: 

I have condensation marks on a wallpapered ceiling. Can I use the product to paint over the wallpaper?

Answer: 

These stains on the wallpaper could be either mould or water staining.

Kill and clean any black mould with a fungicidal wash such as Zinsser Mould Killer & Remover. Allow to dry then prime the surface with Coo-Var Shellac Prime-All, then apply 2 - 3 coats of Coo-Var Anti-Condensation Paint.

questions gary on 07/02/2018
Question: 

hi, would this be suitable for a steal boat engine room,? will it stand up to oil and grease like bilge paint?

Answer: 

Coo-Var Anti-Condensation Paint is water based and does not contain any anti-corrosive pigments or additives. To apply to steel it would need to be primed first with an anti-corrosive metal primer. If Coo-Var Anti-Condensation Paint was applied after this it could be finally over-coated with Teamac Bilge Paint to get the required oil and grease resistance.

questions Ian Cutler on 09/08/2017
Question: I live in a Cobb constructed cottage with I an area of mould and damp on an exterior wall......being Cobb it is better that the wall breaths so will I be able to use this product, or any similar, and then over paint with a light emulsion?
Answer: 

We would recommend Zinsser AllCoat Exterior Matt for this as it is breathable and has good anti mould properties as well. Treat the mould first then apply 2 coats of the Allcoat.

questions John Sullivan on 12/12/2016
Question: Can I use wallpaper after painting with Anti Condensation Paint? Thanks
Answer: 

Yes, but be sure to allow Coo-Var Anti-Condensation Paint to thoroughly dry (5 - 7 days @ 20°C) before applying the wallpaper.

questions Paul Bentley on 24/10/2016
Question: Hi.Can this Product be used on wooden panelling in a bathroom? Thanks Paul
Answer: 

Yes, but any areas of bare timber must first be primed with Coo-Var Penetrating Wood Primer before application of the Coo-Var Anti-Condensation Paint.

  

Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Sika BituSeal Primer

Sika BituSeal Primer is a bitumen solution primer to be used in conjunction with Sika BituSeal S-115 to increase adhesion and bond to the substrate. High adhesion and bonding ability on various substrates, good binding ability for dust and loose particles, ready to use by brush, roller or spray.

Price £135.84
In stock

Rust-Oleum Dacfill Frigo Gas & Vapour Tight Coating

Rust-Oleum Dacfill Frigo is a gas & vapour tight coating for walls and ceilings, ideal for use in cold stores. Rust-Oleum Dacfill Frigo has high vapour and gas tightness with permanent high elasticity of up to 400%. It offers resistance against sudden variations in temperature and exhibits high mechanical strength.

Price £128.84
In stock

SikaMur InjectoCream 100

SikaMur InjectoCream 100 is a new concept for the control of rising damp. It is a water repellent, silane-based emulsion. A simple application gun is used to inject the cream into a series of holes drilled into a mortar course. Once injected to the mortar course, SikaMur InjectoCream 100 will diffuse within the damp wall to form a water repellent barrier...

Price £177.29
In stock

Sika Cavity Drainage System Accessories

The Sika Cavity Drainage System utilises a high density polypropylene internal drainage membrane, the system is installed loose laid in flooring applications and attached to the wall with surface plugs in vertical installations. Here you can find the associated accessories used with the Sika Cavity Drainage System.

Price £111.93
In stock

Remmers Color SA Plus (Mould Protect)

Remmers Color SA plus is a high quality, interior wall paint with micro-silver as a film preservative against bacteria & mould. A high quality interior coating that is used in rooms that are at risk for mould or are already infested, e.g. in living rooms and bedrooms, hospitals, children's rooms, schools, kindergartens, offices, storage rooms, hotels,...

Price £48.96
In stock

Zinsser Perma-White Exterior

An exterior paint which produces a tough, durable finish with up to 15 years performance, designed to resist cracking, fading, peeling and blistering. It contains a biocide to protect the dried coating against fungal degradation.

Price £18.67
In stock

Sika HD20 Membrane

The Sika HD20 Membrane is a high-density polyethylene, high capacity cavity drainage membrane principally for use on floors, providing high water flow with a deep stud profile designed to resist blockages caused by lime deposits. Ideally suited by heavy duty use on floors, impermeable to water, gas and vapour, fast track installation, can be over-screeded...

Price £506.58
In stock

Sika BituSeal S-115

Sika BituSeal S-115 is a post applied self-adhesive waterproofing sheet membrane. It is based on SBS (styrene-butadiene-styrene) modified bitumen, reinforced with polyester non woven fabric. It has a silicone-treated release liner on the upper and lower surface. Sika BituSeal S-115 is designed for use as an underlayer in fully self-adhesive multi-ply...

Price £178.75
In stock

1901 Anti-Condensation Paint

1901 Anti-Condensation Paint is a matt white paint that helps prevent the formation of condensation on walls and ceilings in rooms prone to airborne moisture such as bathrooms, wet rooms, communal shower/changing rooms and kitchens etc.

Price £28.23
In stock

SikaProof P-12 Membrane

SikaProof P-12 is a fully and permanently bonded, self-adhesive, post-applied, composite sheet membrane waterproofing system for reinforced concrete structures. It consists of a flexible polyolefin (FPO) based membrane that is pre-coated with an adhesive sealant layer so that the membrane system is self-adhesive. It is cold- and post-applied, without heat...

Price £741.84
In stock

Sika Plaster Drainage Membrane

The Sika Plaster Drainage Membrane is a 5mm high-density polyethylene cavity drainage studded membrane used for internal fixing to masonry, stone or concrete walls. Suitable for over-plastering/rendering with sand/cement or with Sika Whitewall one coat anhydrite plaster. Easy to cut, fix and seal, unique undercut stud design creates mechanical key for...

Price £365.21
In stock

Sika Drain 850 Geo

Sika Drain 850 Geo is a heavy duty drainage and protection sheet used as a protection and drainage sheet for preformed sheet membrane waterproofing systems, liquid applied membranes and with the Sika White Box concept for waterproofing retaining walls and heavy duty roofs/podiums.

Price £2,575.08
In stock