Crown Trade Steracryl Mould Inhibiting Matt

Crown Trade Steracryl Mould Inhibiting Matt View larger
Typical Coverage (per coat)14m² per litre
Touch Dry4 Hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

A water-based, high opacity matt mould inhibiting finish suitable for use on interior walls and ceilings.

Read Full Description

More details

£48.09 + VAT

A water-based, high opacity matt mould inhibiting finish suitable for use on interior walls and ceilings. Steracryl Mould Inhibiting Matt contains fungicide to maintain decorated surfaces by inhibiting the development of mould growths on the paint film.

• Suitable for internal areas likely to be affected by mould
• Highly durable matt finish
• Excellent coverage
• Ideal for use in void premises and areas affected by condensation

What is mould?
Moulds and fungi are found everywhere inside and outside. They can grow on almost any substance when moisture is present, such as empty premises and voids where condensation is prevalent. Moulds, when they produce, make spores which can be carried by air currents and when these land on a moist surface, suitable for life, they begin to grow.

Spores need 3 things to grow into mould...

Nutrients: Such as cellulose which can be found in most papers and paints.
Moisture: As found in areas of high condensation, e.g. void properties, bathrooms, kitchens, etc.
Time: Mould growth begins between 24 hours and 10 days from the provision for the growing conditions.

In artificial environments, like buildings, humidity and temperature are often stable enough to foster the growth of mould colonies. Some mould can begin growing at temperatures as low as 2°C and, if conditions are not suitable for growth, they can remain alive, in a dormant state within a large range of temperatures before they die. This explains how moulds survive harsh conditions such as containers in refrigerators or inside building structural cavities.

Testing for Mould Inhibition:
Crown Trade Steracryl has a proven pedigree in the prevention of mould growth. Stringent testing by the PRA (The Paint Research Association) has found it to be an effective mould inhibitor over long periods of time.

Fungal testing was carried out according to the British Standard test procedure BS3900: G6, in which the test paint films were inoculated with a spore suspension containing the following mixture of mould and yeast fungi.

The test panels and control panels were spray inoculated with the spore suspension and placed in a fungal test cabinets. After 7 days of incubation, the panels were re-inoculated with the spore suspension and incubation was continued.

Crown Trade Steracryl proved highly effective as a mould inhibiting product when compared to a standard paint product.

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00

£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)


£50 (Standard 2-3 Day Delivery Only)


Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Steracryl TDS


Steracryl MSDS

Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.