Glixtone Fungi-Shield Anti-Mould Paint Kits

GLIXKIT
GLI7026

Glixtone Fungi-Shield Anti-Mould Paint Kits contain everything you need to provide a washable, decorative fungicidal, anti-mould, paint finish to areas susceptible to mould and bacterial growth.

  • Suitable for Walls, Ceilings, Woodwork, Bathrooms, Shower Rooms, Kitchens, Bedrooms, Living Areas
  • Internal use only on any above ground surface to eliminate mould, algae and fungus
  • Environmentally friendly, water-borne formulation
  • Non-toxic and odour free when dry
  • Non caustic and non-injurious to the skin
  • Mould will not grow for the life of the paint film
  • Available in 1,600+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours
  • Available in 4 kit sizes - Click Here to view full kit contents

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£38.26
£45.92 Incl. VAT
Quantity
Please choose your colour
In Stock and Available for Delivery (See Delivery Options Below)

Description

Glixtone Fungi-Shield Anti-Mould Paint Kits contain everything you need to provide a washable, decorative fungicidal, anti-mould, paint finish to areas susceptible to mould and bacterial growth.

These kits are for internal use only on any above ground surface to eliminate mould, algae and fungus. They are safe to use with an environmentally friendly, water-borne formulation which is non-toxic and odour free when dry, as well as being non caustic and non-injurious to the skin.

Glixtone Fungi-Shield Anti-Mould Paint Kits are suitable for Walls, Ceilings, Woodwork, Bathrooms, Shower Rooms, Kitchens, Bedrooms and living areas.

Available in 4 kit sizes - please Click Here to view full kit contents.

Glixtone is affiliated with the National Residential Landlords Association (NRLA) as a Recognised Supplier.

Landlords face an on-going battle with properties and the infestation of mould which is both unsightly and a health hazard to their Tenants. Re-decoration is expensive, time consuming and disruptive. If Health Inspectors are notified this can also be a real problem to Landlords.

Glixtone Fungi-Shield will not stop condensation or damp, however, when applied it is impossible for mould spores to survive on its surface as the active biocide is distributed evenly over the entire paint film and will continue to kill spores on contact. Glixtone Fungi-Shield offers a long lasting solution to what can be a never ending battle. 

Available in White and 1,600+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours.



Quick Links - Click To Jump To Section:




Features & Benefits


       
  • Everything you need to provide a washable, decorative fungicidal, anti-mould, paint finish to areas susceptible to mould and bacterial growth
  • Suitable for Walls, Ceilings, Woodwork, Bathrooms, Shower Rooms, Kitchens, Bedrooms, Living Areas
  • Internal use only on any above ground surface to eliminate mould, algae and fungus
  • Environmentally friendly, water-borne formulation
  • Non-toxic and odour free when dry
  • Non caustic and non-injurious to the skin
  • Mould will not grow for the life of the paint film
  • Available in 1,600+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours
  • Available in 4 kit sizes - Click Here to view full kit contents
  • Approved by the National Residential Landlords Association (NRLA)



Application Instructions


  • Completely remove all traces of loose, flaking soft and friable paint back to a clean firm surface by scraping and or washing
  • Remove any existing mould growth by scraping or brushing with a stiff fibre brush, (NOT wire)
  • During preparation, avoid the inhalation of dust
  • Wear a suitable face mask if dry sanding
  • Special precautions should be taken during surface preparation of pre-1960’s surfaces over wood and metal as they may contain harmful lead. For further advice, please contact us on 0113 2455450 (option 2) or send a message to [email protected]
  • Make good any surface imperfections to original profile with a suitable filler and allow to dry thoroughly
  • Thoroughly abrade any glossy surfaces with glass paper to achieve a good key
  • Sterilise affected areas with Glixtone Concentrate Sterilising Solution diluted 5 to 1 with water
  • If you wish mark the 240ml container into 5 equal parts which can then be mixed with 1 Litre of water, if you do not need to use 5 Litres
  • Allow to dry for 24 hours
  • This may leave a ‘STAINED’ area that are Mould SPORES which will grow back very quickly
  • On these ‘STAINED’ areas use Glixtone Concentrate Sterilising Solution UNDILUTED using a sponge and protective gloves and wipe over the stained area with the Sterilising Solution but DO NOT WASH OFF
  • Metal surfaces: Prime with an appropriate primer and allow to dry or protect with tape
  • Clean away all dust and debris from the surface before painting
  • Apply two coats of Glixtone Fungi-Shield Wall Coating in your chosen finish and colour at 11-13m² per litre/per coat, depending upon type of surface. This should equate to Wet: 65 microns / Dry: 30 microns
  • Allow 4 hours between coats
  • Glixtone Fungi-Shield may be thinned by up to 10% by water to all bare areas to be coated, prior to final coats



Important Notes


  • Please refer to all product Data Sheets before use
  • Particular attention should be taken when using this product, in areas where food stuff, eating utensils or food contact surfaces exist
  • If ventilation is inadequate during use, suitable respiratory protection must be worn which is not included in these kits
  • Allow 5 days after the final coat of Fungi-Shield has been applied for the paint system to dry before washing/wiping down
  • Clean all equipment thoroughly with water immediately after use



Limitations


  • Not recommended for use in extremely humid conditions or where frequent scrubbing occurs
  • Please Note: If Glixtone Fungi-Shield coatings are over-painted with anything other than Glixtone Fungi-Shield products, the fungicidal properties will be lost



FAQ's


Why does Glixtone Fungi-Shield work and Others Don’t?

Other Fungicidal/Anti-Mould paints use an additive which is mixed into an already made Emulsion Paint. This means that not all of the paint will carry the same amount of the Fungicide which protects against Mould growth.

Glixtone use an Acrylic Resin and their own Fungicide and an Algaecide which forms a thermal barrier to areas subject to varying temperatures and condensation, eg kitchens, bathrooms, shower rooms, bedrooms even Living Rooms etc.

All of the constituents of the paint are added in a formulated process and dispersed to ensure that all the pigments and constituents including UV stabilisers, algaecides, and fungicides are coated evenly in the paint blend to produce a paint that is consistent, stable and which will promote all of its anti-fungal properties.

The paint is tested and fine tuned to ensure that its application properties are fully utilised and the quality is up to our extremely high specification.

This means that the active anti-fungal biocidal components are evenly bonded to the active constituent of the paint to ensure that it is evenly distributed when coated out to prevent mould infestation.

This ensures that every part of Glixtone Fungi-Shield carries the same amount of the active biocide and when applied every part of the surface will be protected.

Do I Need a Stain Block?

Only if there is any other staining apart from Blackspot/Mould on the surface to be painted, such as water damage etc.



Kit Contents


5m² Pack

 

13m² Pack

  • 1 x 2.5lt Glixtone Fungi-Shield Anti-Mould & Black Spot Paint (Matt)
    • Available in white, or one of 1,600+ RAL, BS and NCS colours
  • 1 x 240ml Glixtone Fungi-Shield Concentrated Sterilising Solution
  • 1 x Standard Synthetic Sponge (19111581)
  • 1 x Pair of Disposable Nitrile Gloves (L)
  • 1 x Pair of Safety Goggles
  • 1 x Pair of Disposable Coveralls
  • 1 x 2" Contractor Paint Brush 
  • 1 x 9" Roller Kit

 

27m² Pack

  • 1 x 5lt Glixtone Fungi-Shield Anti-Mould & Black Spot Paint (Matt)
    • Available in white, or one of 1,600+ RAL, BS and NCS colours
  • 1 x 240ml Glixtone Fungi-Shield Concentrated Sterilising Solution
  • 1 x Standard Synthetic Sponge (19111581)
  • 1 x Pair of Disposable Nitrile Gloves (L)
  • 1 x Pair of Safety Goggles
  • 1 x Pair of Disposable Coveralls
  • 1 x 3pc Contractor Brush Pack
  • 1 x 9" Roller Kit

 

55m² Pack

  • 2 x 5lt Glixtone Fungi-Shield Anti-Mould & Black Spot Paint (Matt)
    • Available in white, or one of 1,600+ RAL, BS and NCS colours
  • 2 x 240ml Glixtone Fungi-Shield Concentrated Sterilising Solution
  • 1 x Standard Synthetic Sponge (19111581)
  • 1 x Pair of Disposable Nitrile Gloves (L)
  • 1 x Pair of Safety Goggles
  • 1 x Pair of Disposable Coveralls
  • 1 x 3pc Contractor Brush Pack
  • 1 x 9" Roller Kit
Product Details
GLIXKIT

Data sheet

Manufacturer
Glixtone
For Use By
General Use
Interior / Exterior Use
Interior
Water / Solvent Based
Water
Application Method
Brush, Roller, Spray, Sponge
Sheen
Matt
Silk
Pack Size
5m² Pack
13m² Pack
27m² Pack
55m² Pack
Key Features
Anti-Mould, Fungicidal, Washable
Recommended Thinner/Cleaner
Water
Drying time
4 hours in dry, well-ventilated conditions
Colour(s)
Fully Tintable
Colour(s)
White
Fastest Delivery
Next Working Day
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Glixtone Fungi-Shield Anti-Mould & Black Spot Paint

Glixtone Fungi-Shield Anti-Mould and Black Spot Paint, approved by the National Residential Landlords Association (NRLA), is a washable, decorative and highly effective fungicidal anti-mould paint for areas susceptible to mould and bacterial growth. It is suitable for use on any internal walls and ceilings. Suitable for Walls, Ceilings,...

Price £13.98
In Stock and Available for Delivery

Glixtone Fungi-Shield Concentrated Sterilising Solution

Glixtone Fungi-Shield Concentrated Sterilising Solution, approved by the National Residential Landlords Association (NRLA), destroys mould or fungi, sterilising prepared surfaces prior to the application of Glixtone Fungi-Shield Paint. Ideal for any internal areas that are susceptible to mould or organic growth including: walls, ceilings,...

Price £8.82
In Stock and Available for Delivery