Alternatively you can email our sales & support team on [email protected]
Mathys Paracem Deco Satin
831.MM.4
Mathys Paracem Deco Satin is a high-quality satin gloss interior wall paint with excellent flow, good mechanical resistance against rubbing, smooth satin aspect, closed coating structure, washable, high covering power and no tendency to overlap.
Mathys Paracem Deco Satin is a high-quality satin gloss interior wall paint with excellent flow, good mechanical resistance against rubbing, smooth satin aspect, closed coating structure, washable, high covering power and no tendency to overlap.
Air-Atomised Spray: If required dilute with water.
Remarks
In case of application on patterned vinyl wallpaper, Pegaprim Isofix should be used to block platicizers migration and limit tacking effect.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
831.MM.4
Data sheet
Application
Brush, Roller, Spray
Dry to Recoat (at 20°C)
2 hours
Fully Cured (at 20°C)
2 days
Coverage
7m² per litre
Min. Application Temperature
5°C
Density
1,32 - 1,36 (white - wit - blanc)
Solids by Volume
42 - 44% (white - wit - blanc)
VOC
30 g/l
Shelf Life (from date of manufacture)
2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Mathys Fassiprim is a solvent borne primer-surfacer that is a moisture regulating paint for indoor and outdoor timber work. Use as a primer for different types of wood and well cleaned, well adhering old coatings.
Solvent based primer-surfacer containing soya-alkyd resins
Excellent flow out and adhesion on wood
Moisture controlling (less...
Mathys Pegafix is a colourless impregnating primer for porous, mineral substrates such as concrete, breeze block, bricks, etc. before painting them with waterborne paints.
High fixing capacity
Superior penetration characteristics
Water based
Mathys Paracem Deco Satin is a high-quality satin gloss interior wall paint with excellent flow, good mechanical resistance against rubbing, smooth satin aspect, closed coating structure, washable, high covering power and no tendency to overlap.
Excellent flow
Good mechanical resistance against rubbing
Smooth satin aspect
Closed coating...
Mathys Pegaprim Isofix is a super adhesion and stain block primer for interior and exterior use. Produces good adhesion on metals and smooth hard surfaces.
Very fast drying
Closed, good adhering paint film
Masks odours
Recoatable with most water and solvent borne decorative paints
Can be applied at freezing temperatures
Coverage...
Mathys Pegaprim Xpress is an outstanding all-purpose, all surface primer, which is great for all interior and exterior surfaces - sticks to the glossiest surfaces and blocks difficult stains from appearing on your interior and exterior painted surfaces.
Interior and exterior
Mould & mildew resistant film
Sticks to all surfaces without...
Rust-Oleum Mathys Pegalink Universal Adhesion Primer is a water based primer for indoor and outdoor use. Adheres to many surfaces: wood, gypsum, cement, bricks and especially on smooth and difficult to adhere to surfaces like: galvanised steel, copper, zinc, polycarbonate, hard PVC, Pegagraff Hydro, etc.
Excellent adhesion
Flexible...
Mathys Pegamat Aqua Isole is a water based, low tension, matt renovation and stain blocking paint for use on interior walls and ceilings based on modified alkyd resins.
Low tension film
Primer and topcoat in one
Insulates nicotine and smoke stains, old damp spots and numerous colorants
Long open time
Quickly recoatable
Uniform mat...
Sikagard 406 W is a single component white, waterborne acrylic resin based surface coating containing an organic in film preservative with a mat finish.
Topcoat or standalone coating for: internal walls and ceilings for concrete, bricks, cement based and gypsum substrates, metallic surfaces, timber, tiles and plastic. Suitable for...
Rust-Oleum Biosan Aqua Plus is a water-based 2-pack anti-bacterial topcoat for walls and ceilings where hygiene control is essential, like hospitals, kitchens, dairies, breweries, schools etc. Whilst offering exceptional abrasion resistance, it is also water dilutable, solvent free - almost odourless - and easy to clean.
High build and...
Rust-Oleum 9200 Rust-O-Thane is a satin, water based polyurethane for a very durable and colourfast finish on coated floors, walls and primed metal. Especially recommended where general urethane performance like excellent weather resistance (UV), easy cleaning and abrasion resistance is required.
Rust-Oleum's hard wearing, washable...
503 Easy Clean Anti Slip Coating is a high-build epoxy resin coating containing a hard wearing fine particle anti slip additive that is pre-dispersed into the resin and held in suspension. The result provides a ready to use product that leaves an evenly textured, slip resistant surface that is easy to clean and extremely durable.
Sikagard 403 W is a single component, waterborne modified acrylic resin based intermediate and surface coating, containing an antimicrobial additive.
Features and Benefits
Seamless, easy to clean finish
Good resistance to repeated cleaning regimes using mild detergents and cleaning solutions
Tough and highly durable
Good water vapour...
Rust-Oleum 8399 Hygienic Primer is a specially formulated hygienic primer for use with Rust-Oleum 8300 Hygienic Topcoat. As a system it protects against mild chemical exposure, occasional product spillage, frequent chemical cleaning, humidity and moisture. Ideal for walls and ceilings.
Very fast drying and recoatable with Rust-Oleum 8300...
Rust-Oleum 8798 Hygienic Acrylic Primer is a water-based single pack hygienic primer which once overcoated with Rust-Oleum 8700 Hygienic Topcoat protects walls and ceilings against normal humidity and contamination indoors.
Fast drying and recoatable with Rust-Oleum 8700 Hygienic Topcoat
Offers better protection against contamination than...
Rust-Oleum 5500 Solvent Free Epoxy is a high build, solvent-free epoxy floor paint for garages, warehouses, showrooms, corridors, indoor car parks, workshops etc. Optimal protection in only one or two layers.
High build coating (150 microns), very durable
Suitable for frequent (chemical) cleaning
Excellent resistance against immersion...
Mathys Paracem Deco Soft is a high-quality semi-matt, warerborbe acrylic paint for application as a finish to interior walls. Excellent flow, resistant to scrubbing and washing and high covering power.
Excellent flow
Good mechanical resistance against rubbing
Smooth semi- matt finish
Closed coating structure, washable
High covering...
Rust-Oleum 8700 Hygienic Acrylic Topcoat is a water-based single pack hygienic topcoat designed and developed by Rust-Oleum which protects walls and ceilings against normal humidity and contamination indoors.
Offers better protection against contamination than non-hygienic paint
Very fast drying and recoating times (3 coats in a day)...
Sikagard 405 W is a single component white, waterborne acrylic resin based coating containing an organic in-fim-preservative with a mid-sheen finish.
Topcoat or stand alone coating for internal walls and ceilings - concrete, bricks, cement based and gypsum substrates, metallic surfaces, timber, tiles and plastic. Suitable for pharmaceutical,...
Coo-Var Guard-Coat is an anti-microbial coating which inhibits the growth of bacteria. The antibacterial action is created with silver ion technology. This exceptionally hard wearing epoxy paint system is suitable for floors and walls (even with heavy foot and vehicle traffic). Dries to an off-gloss finish. Water thinnable.
Coo-Var Guard-Coat...
Sherwin-Williams Macropoxy M630V2 (formerly known as Biogard M630V2) is a water-based, two-pack epoxy gloss finish for interior use only, recommended for application to suitably sealed masonry walls, floors and ceilings. It may also be used on new and old concrete as well as previously painted surfaces and suitably primed steel.
Coverage...
A water based, low odour, non-flammable, colourless sealer for interior brick and masonry surfaces to seal and protect. Ideal to prevent crumbling and dusting, produces a stain resistant, cleanable surface.
Rust-Oleum Dacfill Frigo is a gas & vapour tight coating for walls and ceilings, ideal for use in cold stores. Rust-Oleum Dacfill Frigo has high vapour and gas tightness with permanent high elasticity of up to 400%. It offers resistance against sudden variations in temperature and exhibits high mechanical strength.
Ideal for cold stores...
