- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Coronavirus Updates - Open and Services as Normal (click for more info)
Coo-Var Shellac Prime-All
347/V604/20
Coo-Var Shellac Prime-All is a heavy duty, shellac based coating designed to block out difficult stains and odours. Ideal for sealing tar, bitumen and creosoted surfaces and to prevent bleeding through in subsequently applied solvent based paints. It exhibits heavy stain blocking from nicotine, pen, oils and water stains and has rapid drying properties.
Product Features
- Primer and sealer for timber, wood composites, plaster, cement and brickwork.
- Can be overcoated with oil and water based paints.
- Seals tar, bitumen and creosoted areas.
- Can be used as a spot-primer on exterior surfaces.
Description
Coo-Var Shellac Prime-All is a heavy duty, shellac based coating designed to block out difficult stains and odours. Ideal for sealing tar, bitumen and creosoted surfaces and to prevent bleeding through in subsequently applied solvent based paints. It exhibits heavy stain blocking from nicotine, pen, oils and water stains and has rapid drying properties. Can be overcoated with oil and water based paints.
Shellac Prime-All is a primer and sealer for timber, wood composites, plaster, cement and brickwork. Seals tar, bitumen and creosoted areas. Can be used as a spot-primer on exterior surfaces.
Surface Preparation
All surfaces should be clean, dry and free from oil, grease and loose flaking material.
Application Conditions
Sir well before use. Suitable for application by brush or roller. Apply a full coat with the minimum of brushwork. If a second coat is required this can be applied after approximately 30 minutes. Avoid over-brushing.
Application Details
Stir well before use. Apply by brush or roller. Apply a full coat with the minimum of brushwork. If a second coat is required, this can be applied after approximately 30 minutes.
Subsequent Coat
Selected finishing coat.
Product Features
- Primer and sealer for timber, wood composites, plaster, cement and brickwork.
- Can be overcoated with oil and water based paints.
- Seals tar, bitumen and creosoted areas.
- Can be used as a spot-primer on exterior surfaces.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
347/V604/20
Data sheet
- Manufacturer
- Coo-Var
- Interior / Exterior Use
- Interior and Exterior
- For Use On
- Timber, Wood, Plaster, Cement, Brick
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 1L, 2.5L, 5L
- Parts
- One
- Base Type
- Shellac
- Application
- Brush, Roller
- Dry to Recoat (at 20°C)
- 30 mins
- Coverage
- 10m² per litre
- Recommended Thinner/Cleaner
- Methylated Spirit
- Solids by Volume
- 45%
- Touch Dry
- 10 mins
- Finish
- Matt
- Recommended Wet Film Thickness
- 100 microns
- UN Number
- UN1263
Be the first to ask a question about this product!