Mathys Pegaprim Xpress
  • Mathys Pegaprim Xpress

Mathys Pegaprim Xpress

3390.1.1

Mathys Pegaprim Xpress is an outstanding all-purpose, all surface primer, which is great for all interior and exterior surfaces - sticks to the glossiest surfaces and blocks difficult stains from appearing on your interior and exterior painted surfaces.

  • Interior and exterior
  • Mould & mildew resistant film
  • Sticks to all surfaces without sanding
  • Rust inhibitive - great for new metal
  • Quick drying - Fast 1 hour recoat time
  • Flexible
  • Insulating
  • Good filling and hiding power
  • Closed good adhering paint film
  • Recoatable with most water and solvent borne decorative paints

Colour
Size
Finish
£13.91
VAT excluded

£16.70 Tax incl.
Quantity

Description

Mathys Pegaprim Xpress

Mathys Pegaprim Xpress is an acrylic, water based stain-blocking and fast-drying universal adhesion primer. Pegaprim Xpress is an outstanding all-purpose, all surface primer, which is great for all interior and exterior surfaces. Its unique acrylic, latex formula sticks to the glossiest surfaces and blocks difficult stains from appearing on your interior and exterior painted surfaces. Excellent adhesion on metal (steel, zinc, aluminium, galvanized steel) and on smooth hard surfaces (PVC, polyester, formica). Fixes porous surfaces (e.g. masonry, plaster, concrete, wood, chipboard). Insulates stains (e.g. tar, soot, graffiti, moisture). In difficult cases: use Pegaprim Isofix.

Features & Benefits

  • Interior and exterior
  • Mould & mildew resistant film
  • Sticks to all surfaces without sanding
  • Rust inhibitive - great for new metal
  • Quick drying - Fast 1 hour recoat time
  • Flexible
  • Insulating
  • Good filling and hiding power
  • Closed good adhering paint film
  • Recoatable with most water and solvent borne decorative paints

Flexible - Breathable - Durable
Exterior wood, Vinyl siding/Shutters, Masonry/Concrete, Brick, Stucco, Aluminium.

Penetrates and Seals Porous Surfaces
Bare drywall, Chalky aluminium siding, Builder’s flat paint, Bare wood, Masonry/Concrete, Stucco

Adheres to Hard-to-Paint Surfaces without Sanding
Ceramic tile, Panelling, Formica®, Glass, PVC piping, Metal doors, Gutters/Downspouts

Low Odour - Soap and Water Clean up
Homes, Workplaces, Schools, Hotels, Hospitals

Technical Data

  • Density: ± 1,26
  • Gloss Level: Satin
  • Gloss level at 60º: Satin gloss: ± 15%
  • Solids content in volume: ± 39 %
  • Solids Content in weight: ± 52 %

Drying Times At 20°C/RH 50%

  • Touch dry: 30 minutes
  • Dry to recoat: 1 hour
  • Fully cured: 2 days

Theoretical Consumption

± 10 m²/l per coat

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

Surface Preparation

  • The surface should be clean, dry and stable.
  • Where necessary, degrease.
  • Contamination has to be removed as thoroughly as possible.
  • Reinforce the wood structure if necessary (e.g. after burning off of new wood on the outside) by impregnating with Adex.
  • Wood knots have to be insulated beforehand with Pegapim Isofix.
  • Old intact lacquer paint coats should be roughened up slightly in order to assure an optimal adhesion.
  • In case of doubt, realise an adhesion test.
  • When applied as spot insulator, a longer drying time should be respected before recoating.

Directions For Use

To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

Application Conditions

> 5°C, < 80% R.H.

Appilcation Methods

  • Brush: Apply undiluted.
  • Roller: Apply undiluted.
  • Airless Spray: Nozzle: 0,011 - 0,013 inch / Pressure: 200 bars. If necessary, dilute with water
  • Air-Atomised Spray: Dilute with a few % volume of water

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
3390.1.1

Data sheet

Application
Brush, Roller, Spray
Dry to Recoat (at 20°C)
1 hour
Fully Cured (at 20°C)
2 days
Coverage
Mathys Pegaprim Xpress
Min. Application Temperature
5°C
Density
± 1,26
Solids by Volume
± 39 %
VOC
40 g/l
Shelf Life (from date of manufacture)
2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Touch Dry
30 mins
Recommended Dry Film Thickness
40 µm
Recommended Wet Film Thickness
100 µm
UN Number
UN3082
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send