Mathys Pegamat RL Isole

173.AE.0.5

Mathys Pegamat RL Isole is a deodorised low tension solvent-based insulating and satin blocking paint based on plastified acrylic resins. 

  • Good covering power
  • Low odour
  • Non yellowing
  • Low tension film
  • Unsaponifiable
  • Matt film without laps
  • Isolates nicotine stains, old damp, smoke and soot stains and numerous colorants
  • Quickly recoatable
  • Primer and topcoat in one
  • Also suitable for insulating hard foam boards, even those in polystyrene
Colour
Size
Finish
£5.96
VAT excluded

£7.15 Tax incl.
Quantity

Description

Mathys Pegamat RL Isole

Mathys Pegamat RL Isole is a deodorised low tension solvent-based insulating and satin blocking paint based on plastified acrylic resins. Pegamat RL Isole is intended to be used as renovation paint on interior walls and ceilings. Suitable substrates are: plaster, cement, concrete, fibreboard, insulating hard foam boards, old paints, wallpaper, etc.

  • Good covering power
  • Low odour
  • Non yellowing
  • Low tension film
  • Unsaponifiable
  • Matt film without laps
  • Isolates nicotine stains, old damp, smoke and soot stains and numerous colorants
  • Quickly recoatable
  • Primer and topcoat in one
  • Also suitable for insulating hard foam boards, even those in polystyrene

Technical Data

  • Density: 1.33 - 1.37 g/cm³
  • Gloss Level: Matt
  • Gloss level at 60º: Matt: < 2%
  • Solids content in volume: 38 - 40%
  • Solids Content in weight: 64 - 66%

Drying Times At 20°C/RH 50%

  • Touch dry: 3 h
  • Dry to recoat: Wet in wet or after 4 h
  • Fully cured: 1 day

Theoretical Consumption

9 - 12 m²/l per coat

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

Surface Preparation

  • Suitable substrates are: plaster, cement, concrete, fibreboard, insulating hard foam boards, old paints, wallpaper, etc. Substrates should be sufficiently dry and stable. Apply 1 or 2 coats according to the condition of the substrate; if necessary, the second coat can be applied wet in wet. Do not apply on Elastofill; when using Pegaflex, it must first be insulated with Porisol.
  • Old cleaned layers in good condition and light porous substrates may be recoated directly with Pegamat RL Isole.
  • Very porous substrates are to be impregnated first with Pegafix.
  • Persistent stains are to be treated with Pegaprim Isofix

Directions For Use

To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

Application Conditions

Apply in a dry and well-ventilated area. > 5°C, < 80% R.H

Application Methods

  • Brush: Dilute with 3-5% Thinner RL or White spirit if necessary.
  • Roller: Dilute with 3-5% Thinner RL or White spirit if necessary.
  • Airless Spray: Nozzle: 011 - 015 / Pressure: 180 bars. Dilute max. 5% with Thinner RL or White spirit if necessary
  • Air-Atomised Spray: Possible.

Remarks

White spirit increases the odour and makes its use impossible on polystyrene foam. Pegamat RL Isole is a reversible paint system, this means that it dissolves in its own solvent. Therefore, dried spots of Pegamat RL Isole can be removed with Thinner RL or white spirit. Do not tint with universal pigments or on the tinting machine.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
173.AE.0.5

Data sheet

Application
Brush, Roller, Spray
Dry to Recoat (at 20°C)
Wet in wet or after 4 h
Fully Cured (at 20°C)
1 day
Coverage
9-12m² per litre
Min. Application Temperature
5°C
Density
1.33 - 1.37 g/cm³
Solids by Volume
38 - 40%
VOC
455 g/l
Shelf Life (from date of manufacture)
2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Touch Dry
3 Hours
Recommended Dry Film Thickness
40 µm
Recommended Wet Film Thickness
100 µm
UN Number
Not regulated
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
14 other products in the same category:

Zinsser Cover Stain

Cover Stain is the only interior / exterior primer, sealer, stain sealer and bond coat that dries for recoat in only two hours.

Price £12.85
In stock

Mathys Pegaprim Isofix

Mathys Pegaprim Isofix is a super adhesion and stain block primer for interior and exterior use. Produces good adhesion on metals and smooth hard surfaces. Very fast drying Closed, good adhering paint film Masks odours Recoatable with most water and solvent borne decorative paints Can be applied at freezing temperatures

Price £21.35
In stock

Mathys Pegaprim Xpress

Mathys Pegaprim Xpress is an outstanding all-purpose, all surface primer, which is great for all interior and exterior surfaces - sticks to the glossiest surfaces and blocks difficult stains from appearing on your interior and exterior painted surfaces. Interior and exterior Mould &amp; mildew resistant film Sticks to all surfaces without...

Price £12.73
In stock

Zanders PF59 Stain Blocking Primer Finish

Zanders PF59 Stain Blocking Primer Finish is a high quality primer finish in a durable matt finish for all interior and exterior wood, plaster and masonry. Based on advanced acrylic technology Zanders PF59 Stain Blocking Primer Finish also inhibits stains bleeding through the substrate. Features and Benefits Matt finish excellent opacity...

Price £93.98
In stock

Bedec Stain Block

Bedec Stain Block is a unique, water based product that will hold back most normal stains helping to prevent bleed through that can cause unsightly staining on new paintwork. Features and Benefits  Water based Non flammable Easy to apply Easy clean up

Price £15.62
In stock

Zinsser Bulls Eye 1-2-3 Plus

Zinsser Bulls Eye 1-2-3 Plus is the next generation all surface, all purpose water-based primer, sealer and stainkiller for interior &amp; exterior use. Like Bulls Eye 1-2-3, it deals effortlessly with hard to paint interior and exterior substrates such as glossy surfaces, ceramic tiles, non-ferrous metal, vinyl, hardboard, melamine, varnish,...

Price £18.62
In stock

Mathys Pegamat Aqua Isole

Mathys Pegamat Aqua Isole is a water based, low tension, matt renovation and stain blocking paint for use on interior walls and ceilings based on modified alkyd resins. Low tension film Primer and topcoat in one Insulates nicotine and smoke stains, old damp spots and numerous colorants Long open time Quickly recoatable Uniform mat...

Price £35.63
In stock

Zinsser Ceiling Pro 5 in 1

Zinsser Ceiling Pro 5 in 1 is based on ground-breaking paint technology that effortlessly provides a perfectly finished ceiling every time. It adheres to any surface, seals stains (including water and smoke stains), primes and finishes whilst bridging hairline cracks. It also contains a biocide that protects against fungal degradation,...

Price £34.02
In stock

Zinsser Wallpaper Cover-Up

Zinsser Wallpaper Cover-Up is an all-in-one primer, sealer &amp; stain block with high hiding power that obliterates wallpaper print with a smooth matt, off-white finish. ADVANTAGES  Prevents blistering of wallpaper  Blocks water soluble stains  Ensures good adhesion  One coat Economical Decorative It can be overpainted with any...

Price £28.06
In stock

Coo-Var Shellac Prime-All

Coo-Var Shellac Prime-All is a heavy duty, shellac based coating designed to block out difficult stains and odours. Ideal for sealing tar, bitumen and creosoted surfaces and to prevent bleeding through in subsequently applied solvent based paints. It exhibits heavy stain blocking from nicotine, pen, oils and water stains and has rapid drying...

Price £21.12
In stock

Zinsser B-I-N Aerosol

Great for priming interior surfaces and spot priming exterior surfaces. It is formulated to seal, prime and block out stains on previously painted or new work and dries in minutes. 

Price £11.21
In stock

Zinsser B-I-N

The ultimate performance shellac-based primer-sealer and stain killer for interior and spot exterior use. Offers unparalleled adhesion to glossy surfaces (including glass) without the need for scuff sanding and blocks stubborn and persistent stains.

Price £21.35
In stock

Rust-Oleum Universal Stain Block Primer

Rust-Oleum Universal Stain Block Primer is a special primer to be applied before Rust-Oleum Universal All-Surface Paint. It has be specially developed to block stains from bleeding through finished paint film.

Price £17.88
In stock

Zinsser Cover Stain Aerosol

Cover Stain® Aerosol is an interior / exterior primer, sealer, stain sealer and bond coat that dries for recoat in just two hours.

Price £8.54
In stock