Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Jotun Vinyguard Silvergrey 88 is a one component physically drying vinyl coating that is fast drying and can be used as primer or mid coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates.
Recommended for topside, deck and superstructure or as a tie coat for anti-fouling systems in the marine sector.
Jotun Vinyguard Silvergrey 88 is a one component physically drying vinyl coating that is fast drying and can be used as primer or mid coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates.
Jotun Vinyguard Silvergrey 88 is recommended for topside, deck and superstructure or as a tie coat for antifouling systems in the marine sector.
Approvals and certificates
Additional certificates and approvals may be available on request.
 phil jones on 09/09/2016 |
Question: hi
I have a narrow boat with jotun antifoul on it is due for a recoat can i apply new coat on top or do i need to apply vinyguard 88 first |
Answer: Onto existing antifouling we would recommend high pressure fresh water washing, applying a full coat of Jotun Vinyguard Silvergrey 88 and then applying your new chosen antifoul. | |
Teamac Bilge Paint provides protection for the inside surfaces of the hull below the water line. A resilient and hardwearing single pack coating providing available in 4 colours.
International Interzone 954BG is a two component, low VOC, high solids, modified epoxy barrier coating that will continue to cure when immersed in water and has excellent cathodic disbondment resistance. Specifically designed to provide long term steel protection via brush or roller application techniques where the performance of Interzone 954 is required...
Teamac Black Tar Varnish is a synthetic tar varnish for industrial, agricultural and marine use. It is used for the protection of (weathered) wood, metal and other surfaces, inside or outside and should be used on barns, farm buildings, roofs etc. and marine applications.
This versatile coating provides an impenetrable film for severe exposures in marine, offshore, petrochemical, pulp and paper and other aggressive environments. Top Features Excellent abrasion resistance Excellent chemical resistance Outstanding impermeability Single coat, self-priming capabilities
Sherwin-Williams Macropoxy L524 (formerly known as Epigrip L524) is a high build 2-pack modified epoxy coating for immersive protection in salt water, fresh water and crude oil. Recommended Uses Protection of ships bottoms and cargo tanks Submerged/splash zone areas of marine structures Jetties External protection of buried and other pipelines.
Jotun Marathon IQ GF is a two component polyamine cured epoxy coating that is high build, solvent free, glass flake reinforced and is highly scratch resistant. Suitable for environments with very high corrosivity and can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly...
Teamac Marine Gloss is a high end marine coating with excellent opacity and high gloss finish, suitable for all general marine areas above the waterline; bridge fronts, deckwork, masts, superstructures etc. benefits from excellent adhesion.
Jotun SeaQuantum Ultra S is a state of the art chemically hydrolysing silyl acrylate antifouling coating. It provides excellent fouling protection and incomparable hull performance. This is achieved through highly predictable and stable self polishing characteristics reducing hull deterioration, friction and speed loss. The initial smooth surface provides...
Jotun SeaQuantum Ultra is a one component state of the art chemically hydrolysing silyl acrylate antifouling coating. It provides excellent fouling protection and incomparable hull performance. This is achieved through highly predictable and stable self polishing characteristics reducing hull deterioration, friction and speed loss.
Jotun Jotaguard 630 is a two component polyamine cured epoxy coating that is a fast drying, surface tolerant, hard wearing, high solids, high build product. Specially designed for general use in cargo holds and can be used as primer or finish coat in atmospheric and immersed environments.
International Interlac 668 is a one pack, alkyd based, high visibility coating for application to marker buoys and as a safety marker on board ship. International Interlac 668 is for use at Newbuilding, Maintenance & Repair or On Board Maintenance.
Zinc Clad IV 80% by Sherwin-Williams is a two-component, polyamide epoxy, zinc rich coating. It has a low VOC level and contains 80% by weight of zinc dust pigment in its direct film. It meets SSPC Paint Specification #20 for zinc-rich organic primers.
A surface tolerant from Jotun that is a high build epoxy coating suitable for environments with very high corrosivity, such as areas in the splash or tidal zones. Jotun Marathon 500 is a two component polyamine cured epoxy coating. It's a surface tolerant, high solids, high build product that will continue to cure even when immersed in water.
Teamac Marine Satin Finish is a traditional high quality, modified long oil alkyd marine coating. It has a good resistance to oil and water and has been designed for use in a marine environment. Can be used where low reflection and glare is required such as boat roofs. Dries to a durable satin finish.
Jotun Jotaguard 660 is a two component polyamine cured pure epoxy coating that is a fast drying, surface tolerant, very abrasion and impact resistant, high solids, high build product. Specially designed as a high performance coating for cargo holds it can be used as primer or finish coat in atmospheric and immersed environments.
A glass-flake filled, cold cure epoxy having excellent film strength and resistance to water, salt water and wastewater exposures. Can be used on a variety of surfaces including structural steel, piping, pilings, ships, offshore structures and other equipment exposed to industrial or marine environments. Top Features High solids, low VOC...
