Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Jotun Safeguard Universal ES is a two component polyamide cured vinyl epoxy based coating. Specially designed as a tie coat between epoxy primers and antifouling systems but can be used as tie coat for a wide range of topcoats. To be used as tie coat in atmospheric and immersed environments.
Jotun Safeguard Universal ES is a two component polyamide cured vinyl epoxy based coating. Specially designed as a tie coat between epoxy primers and antifouling systems but can be used as tie coat for a wide range of topcoats. To be used as tie coat in atmospheric and immersed environments. Suitable on approved primers on aluminium, carbon steel, galvanised and stainless steel substrates. It can be applied at sub zero surface temperatures.
Features & Benefits
Typical uses
General:
Suitable as tie coat for a wide range of Jotun antifouling products.
Marine:
Exterior areas, specially designed for outside hull, may be used on superstructure, decks and other external areas.
Protective:
Suitable as tie coat in a complete system exposed to a wide range of corrosive environments up to very high and immersed. Recommended for offshore environments, including splash zones, water inlets, cooling pipes, jetties and bridges.
Teamac Black Tar Varnish is a synthetic tar varnish for industrial, agricultural and marine use. It is used for the protection of (weathered) wood, metal and other surfaces, inside or outside and should be used on barns, farm buildings, roofs etc. and marine applications.
With a proven 21 years track record on over 8,700 projects, International Intershield 300 is the offshore industry benchmark in anticorrosive performance. This unique abrasion resistant, pure epoxy coating, with an aluminium content >9%, offers long term asset protection to offshore structures
Jotun SeaForce 60 is the optimal choice if you are looking for an excellent antifouling at a cost effective level. With a predictable and effective performance, Jotun SeaForce 60 limits the hull deterioration caused by fouling throughout the whole sailing interval. This is achieved through a controlled and predictable polishing rate, combined...
Jotun SeaQuantum Ultra is a one component state of the art chemically hydrolysing silyl acrylate antifouling coating. It provides excellent fouling protection and incomparable hull performance. This is achieved through highly predictable and stable self polishing characteristics reducing hull deterioration, friction and speed loss.
Jotun Vinyguard Silvergrey 88 is a one component physically drying vinyl coating that is fast drying and can be used as primer or mid coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates. Recommended for topside, deck and superstructure or as a tie coat for anti-fouling systems in the marine sector.
Teamac Bilge Paint provides protection for the inside surfaces of the hull below the water line. A resilient and hardwearing single pack coating providing available in 4 colours.
Jotun SeaForce 30 is the optimal choice if you are looking for a very good antifouling at a cost effective level. With a predictable and effective performance, Jotun SeaForce 30 limits the hull deterioration caused by fouling throughout the whole sailing interval. This is achieved through a controlled and predictable polishing rate.
Teamac Marine Gloss is a high end marine coating with excellent opacity and high gloss finish, suitable for all general marine areas above the waterline; bridge fronts, deckwork, masts, superstructures etc. benefits from excellent adhesion.
Sherwin-Williams Macropoxy L524 (formerly known as Epigrip L524) is a high build 2-pack modified epoxy coating for immersive protection in salt water, fresh water and crude oil. Recommended Uses Protection of ships bottoms and cargo tanks Submerged/splash zone areas of marine structures Jetties External protection of buried and other pipelines.
Teamac Marine Undercoat is an interior and exterior, oil based marine undercoat. Teamac Marine Undercoat features a high opacity with good flow characteristics for use with Teamac Marine Gloss.
Jotun Jotaguard 690 is a two-component polyamine cured pure epoxy coating that is fast drying and has superb mechanical strength. ADVANTAGES Easy to clean Long lasting Reduced application costs Impact/abrasion resistant Less downtime Certificated
An extremely durable and chemically resistant cladding utilizes a multi-step curing process that incorporates chemically-fused glass flake reinforcing in a highly cross-linked polyester matrix. Top Features Outstanding marine exposure resistance Excellent resistance to both organic and mineral acids Outstanding long-term protection
Teamac Metaclor Underwater CR Primer is a multipurpose primer offering good resistance and protection both above and below the waterline on steel and wood. Can be used as an underwater primer on prepared steel or as a sealer coat over most conventional systems.
Jotun SeaQuantum Ultra S is a state of the art chemically hydrolysing silyl acrylate antifouling coating. It provides excellent fouling protection and incomparable hull performance. This is achieved through highly predictable and stable self polishing characteristics reducing hull deterioration, friction and speed loss. The initial smooth surface provides...
International Interzone 954 (Rapid Cure) is a faster drying version of Interzone 954 to be used in tidal areas where immersion will be rapid. Designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp...
Anti-slip marine coating specially made for the decks of sea faring vessels which is a ready mixed, aggregated coating which provides a rough anti-slip finish when dry to provide extra protection for crew-members while traversing the deck of a boat in motion or vessel in rough seas.
