Jotun SeaForce 90
  • Jotun SeaForce 90

Jotun SeaForce 90

POA

Jotun SeaForce 90 is the optimal choice if you are looking for a fuel saving antifouling at a cost effective level. With a predictable and effective performance, Jotun SeaForce 90 limits the hull deterioration caused by fouling throughout the whole sailing interval. This is achieved through a controlled and predictable polishing rate, combined with an effective mix of biocides.

  • Fuel cost saving alternative to a budget-friendly price - Reduces hull deterioration, friction and hence the speed loss experienced from these factors. 
  • The optimal commercial solution - Jotun SeaForce 90 is suitable if you are looking for the highest performance available within your inflexible operational budget. Used with an anticorrosive primer system suitable for purpose with Jotun Safeguard Universal ES as sealer coat/tie coat.

Colour
Size
Quantity

Description

Jotun SeaForce 90 is the optimal choice if you are looking for a fuel saving antifouling at a cost effective level. With a predictable and effective performance, Jotun SeaForce 90 limits the hull deterioration caused by fouling throughout the whole sailing interval. This is achieved through a controlled and predictable polishing rate, combined with an effective mix of biocides.

Jotun SeaForce 90 is a one component acrylic, hydrolysing antifouling coating based on ion exchange technology that provides very good fouling protection and improved hull performance. This is achieved through self polishing characteristics reducing hull deterioration, friction and speed loss. Jotun SeaForce 90 should be used as finish coat in immersed environments only and is suitable on approved primers and tie coats on aluminium and carbon steel substrates. It can be applied at sub zero surface temperatures.

Features & Benefits

  • Fuel cost saving alternative to a budget-friendly price - Throughout the whole sailing interval, Jotun SeaForce 90 will reduce hull deterioration, friction and hence the speed loss experienced from these factors. Fuel consumption will therefore also be reduced. This fuel saving is achieved through a controlled and predictable polishing rate combined with an effective mix of biocides.
  • The optimal commercial solution - Jotun SeaForce 90 is suitable if you are looking for the highest performance available within your inflexible operational budget. Used with an anticorrosive primer system suitable for purpose with Jotun Safeguard Universal ES as sealer coat/tie coat.
  • Extensive experience - 30 million litres of SeaForce have been painted at more than 15,000 vessels in the last 8 years.

Approvals and certificates

  • Compliant with IMO Antifouling System Convention AFS/CONF/26.

Additional certificates and approvals may be available on request.

Typical use

Marine:
Recommended for under water hull in newbuilding and dry docking. Designed as an efficient solution for vessels trading at a wide range of speed and medium to high activity. The product can be used for long service periods up to 60 months as a part of a complete coating system.

Typical Trade:
Suited for vessels operating in global service, including fresh water exposure during newbuilding outfitting. Recommended for deep sea trade.

Disclaimer

Jotun antifouling products are intended for professional use only and have been specially formulated with increased levels of copper oxide as well as strong biocides for use on vessels and structures operating for long periods in testing conditions where extended service intervals are required. 

The Health & Safety Executive (HSE) deem them 'For professional use only'. This means we can only sell Jotun antifouling products to customers who confirm at the point of ordering that they will be applied in accordance with the appropriate HSE regulations. 

‘Professional users are those who use such products in the course of their work. Under COPR they must have received adequate instruction and guidance in using the pesticide and be competent in its use, in order to protect human beings, other creatures and plants, safeguard the environment and avoid pollution of water. As a minimum pest controllers should be aware of pesticide legislation and use, and how to carry out risk assessment under the Control of Substance Hazardous to Health Regulations (COSHH). However there is no requirement for users of non-agricultural pesticides to have gained a 'certificate of competence'. Users should follow the relevant instructions on the use of any approved pesticide, including instructions on safe disposal.' 

Customers interested in buying Jotun antifouling products should contact us on 0113 2455450 or [email protected] as these products cannot be ordered online.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
POA

Data sheet

For Use On
Aluminium, Carbon Steel
Application Method
Brush, Roller, Spray
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
5L, 20L
Application
Brush, Roller, Spray
Coverage
3.3 - 7.7m² per litre
Touch Dry
30min
UN Number
UN1263
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions [email protected] on 2020-04-21 10:53:01
Question: 

after sea force 90 anti foul paint is applied how long can I leave boat out of water

Answer: 

Here in the UK we would recommend upto 3 months before it needed to go into the water otherwise it dries out and cracks.


Question about the product

* Required fields
(read)
Send