Jotun SeaQuantum Ultra
Reference:
Manufacturer: Jotun
Jotun SeaQuantum Ultra is a one component state of the art chemically hydrolysing silyl acrylate antifouling coating. It provides excellent fouling protection and incomparable hull performance. This is achieved through highly predictable and stable self polishing characteristics reducing hull deterioration, friction and speed loss.
Product Description
Jotun SeaQuantum Ultra is a one component state of the art chemically hydrolysing silyl acrylate antifouling coating. It provides excellent fouling protection and incomparable hull performance. This is achieved through highly predictable and stable self polishing characteristics reducing hull deterioration, friction and speed loss. Jotun SeaQuantum Ultra is to be used as finish coat in immersed environments only and is suitable on approved primers and tie coats on aluminium and carbon steel substrates. It can be applied at sub zero surface temperatures.
Marine Use:
Jotun SeaQuantum Ultra is recommended for under water hull in newbuilding and dry docking. Specially designed as a premium solution for vessels with low activity and slow steaming. Recommended solution for areas with high fouling exposure, such as sea chest, to minimise risk of invasive species. This product provides optimum hull protection in fouling intensive waters or in trades with long lay-ups. The product is designed for long service periods and can be used up to 90 months as a part of a complete coating system.
Protective Use:
Recommended for offshore constructions and immersed areas on static installations.
Typical Trade
Jotun SeaQuantum Ultra is designed for global and especially coastal trade. Recommended for exposure to both sea and fresh water during newbuilding outfitting.
Approvals and certificates
- Compliant with IMO Antifouling System Convention AFS/CONF/26.
Additional certificates and approvals may be available on request.
Disclaimer
Jotun antifouling products are intended for professional use only and have been specially formulated with increased levels of copper oxide as well as strong biocides for use on vessels and structures operating for long periods in testing conditions where extended service intervals are required.
The Health & Safety Executive (HSE) deem them 'For professional use only'. This means we can only sell Jotun antifouling products to customers who confirm at the point of ordering that they will be applied in accordance with the appropriate HSE regulations.
‘Professional users are those who use such products in the course of their work. Under COPR they must have received adequate instruction and guidance in using the pesticide and be competent in its use, in order to protect human beings, other creatures and plants, safeguard the environment and avoid pollution of water. As a minimum pest controllers should be aware of pesticide legislation and use, and how to carry out risk assessment under the Control of Substance Hazardous to Health Regulations (COSHH). However there is no requirement for users of non-agricultural pesticides to have gained a 'certificate of competence'. Users should follow the relevant instructions on the use of any approved pesticide, including instructions on safe disposal.'
Customers interested in buying Jotun antifouling products should contact us on 0113 2455450 or [email protected] as these products cannot be ordered online.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Technical Data
| ||||||
| The figures stated above are approximate. Please ensure you refer to all datasheets for full application information. |
Download
Questions
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.
Close