Price on application

Please contact our sales team on 0113 2455450 to place an order.

Jotun SeaForce 30 M is the optimal choice if you are looking for a very good antifouling coating for maintenance and repair. With a predictable and effective performance, SeaForce 30 M limits hull deterioration caused by fouling throughout the whole sailing interval. This is achieved through a controlled and predictable polishing rate, combined with an effective mix of biocides.

Jotun SeaForce 30 M is a one component high solid hydrolysing antifouling coating based on ion exchange technology, providing good fouling protection. This is achieved by self polishing characteristics reducing hull deterioration. To be used as finish coat in immersed environments only. Suitable on approved primers and tie coats on aluminium and carbon steel substrates. SeaForce 30 M can be applied at sub zero surface temperatures.

Features & Benefits

• 36 months excellent antifouling performance - Jotun SeaForce 30 M will provide excellent antifouling performance at a budget friendly price due to its stable polishing rate and efficient biocide package.
• Optimised cost/performance ratio - The cost base for Jotun SeaForce 30 M is very attractive, allowing owners and operators to limit their antifouling costs without compromising on quality.
• Proven performance - 60 million litres of SeaForce have been painted on more than 20,000 vessels since 2004.
• Jotun SeaForce 30 M is a great cost effective antifouling solution - Used with an anticorrosive primer system suitable for purpose with Jotun Safeguard Universal ES as sealer coat/tie coat.

Approvals and certificates

Compliant with IMO Antifouling System Convention AFS/CONF/26.

Additional certificates and approvals may be available on request.

Typical use

Marine:

Recommended for under water hull in drydocking. Designed for vessels trading at a wide range of speed and activity. The product can be used for long service periods up to 60 months as a part of a complete coating system.

Typical trade

Suited for vessels operating in global service.. Recommended for deep sea trade.

Disclaimer

Jotun antifouling products are intended for professional use only and have been specially formulated with increased levels of copper oxide as well as strong biocides for use on vessels and structures operating for long periods in testing conditions where extended service intervals are required. 

The Health & Safety Executive (HSE) deem them 'For professional use only'. This means we can only sell Jotun antifouling products to customers who confirm at the point of ordering that they will be applied in accordance with the appropriate HSE regulations. 

‘Professional users are those who use such products in the course of their work. Under COPR they must have received adequate instruction and guidance in using the pesticide and be competent in its use, in order to protect human beings, other creatures and plants, safeguard the environment and avoid pollution of water. As a minimum pest controllers should be aware of pesticide legislation and use, and how to carry out risk assessment under the Control of Substance Hazardous to Health Regulations (COSHH). However there is no requirement for users of non-agricultural pesticides to have gained a 'certificate of competence'. Users should follow the relevant instructions on the use of any approved pesticide, including instructions on safe disposal.' 

Customers interested in buying Jotun antifouling products should contact us on 0113 2455450 or [email protected] as these products cannot be ordered online.