Teamac Antifouling D discourages the growth of barnacles, weed, and other water life on the submersed hull of your boat. Contains a high level of cuprous oxide and a blend of biocides to give good antifouling performance on yachts and boats in speeds ranging from 25-30 knots.
Teamac Antifouling A
Teamac Antifouling A is Teamac's 'high end' antifoul. It is a physically ablative antifouling offering excellent performance and protection.
- Personal and commercial use
- Good compatibility
- HSE Approved (8960)
- 18-24 month life expectancy
- Aluminium/steel/wood/GRP adhesion
- Discourages barnacle, weed and water life growth
Teamac Antifouling A is Teamac's 'high end' antifoul. It is a physically ablative antifoul, offering excellent performance and protection with the added benefit of being suitable for direct application to aluminium. Contains a mixture of materials which form a complex matrix that wears away at controlled speed. This is Teamac's only antifoul that is available in white.
- Domestic and commercial
- Aluminium directly
- Vessels with maximum speed 20-30 knots
Teamac Antifouling A contains a high level of copper thiocyanate which provides good antifouling performance on aluminium hulled boats. Teamac Antifouling A discourages the growth of barnacles, weed, and other water life on the submerged hulls of all sea faring vessels. 2 coats are recommended to fully take advantage of the tough anti-fouling properties of this paint.
For metal and wood, make sure to prime surfaces with 2 coats of Teamac Metaclor Underwater CR Primer. If the surface is GRP this step is not required. Cleaning can be accomplished with Teamac Thinner 17.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- 12m² per litre
- Touch Dry
- 2 Hours
|Nigel Westlake on 26/11/2018|| |
How long can the antifoul be applied before going in the water ?
Launch time after painting - minimum 8 hours, maximum 3 months if shrouded from direct sunlight. Minimum 2 coats.
|Stephen Westhorpe on 26/01/2018|| |
Can i overcoat Teamac D Plus with a Copper based Antifouling such as Flag Performance Extra .
Yes, it should not be a problem to overcoat with Flag Performance Extra.
Teamac Protector II Antifouling contains cuprous oxide to give good antifouling performance. Designed for vessels with a max speed of 25 to 30 knots. Expected functional life of the coating is 12 to 18 months. Used as an antifouling for the underwater areas of vessels or underwater structures. Suitable for domestic and commercial vessels with steel, wood,...
Jotun Mare Nostrum SP is a self-polishing antifouling based on a unique binder combination system. ADVANTAGES Totally active surface Clean hull for the whole season Continuously renews True colour once immersed Excellent fouling protection For fresh water
PPG Sigma EcoFleet 530, high-activity, self-polishing antifouling for extreme and aggressive fouling conditions, controlling shell and weed fouling for service periods up to 60 months, depending on vessel type, operation characteristics and system applied. One component TBT-free self-polishing antifouling for new-building and maintenance...
Jotun SeaQuantum Ultra S is a state of the art chemically hydrolysing silyl acrylate antifouling coating. It provides excellent fouling protection and incomparable hull performance. This is achieved through highly predictable and stable self polishing characteristics reducing hull deterioration, friction and speed loss. The initial smooth surface provides...
Jotun SeaForce 90 is the optimal choice if you are looking for a fuel saving antifouling at a cost effective level. With a predictable and effective performance, Jotun SeaForce 90 limits the hull deterioration caused by fouling throughout the whole sailing interval. This is achieved through a controlled and predictable polishing rate, combined with an...
Jotun SeaForce 30 M is the optimal choice if you are looking for a very good antifouling for maintenance and repair. With a predictable and effective performance, SeaForce 30 M limits the hull deterioration caused by fouling throughout the whole sailing interval. This is achieved through a controlled and predictable polishing rate, combined...
Jotun SeaQuantum Ultra is a one component state of the art chemically hydrolysing silyl acrylate antifouling coating. It provides excellent fouling protection and incomparable hull performance. This is achieved through highly predictable and stable self polishing characteristics reducing hull deterioration, friction and speed loss.