PPG SigmaGlide 790

    7386
    PPG4169

    PPG SigmaGlide 790 is a two-component, silicone-based tiecoat for fouling release systems, promoting adhesion for SigmaGlide finishes to be applied on top of specific systems.

    • For use at new-building or maintenance
    • Available in a 20 litre tin in Medium Grey (Sigma 5201)
    • See below for more information on surface preparation, application details and curing times

    Colour
    Size
    Finish
    £1,725.12(ex. VAT)
    £2,070.14 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    PPG SigmaGlide 790, a two-component, silicone-based tiecoat for fouling release system. SigmaGlide 790 is an adhesion-promoting coating for SigmaGlide finishes to be applied on top of specific systems, for use at new-building or maintenance.

    Features & Benefits


    • Adhesion-promoting coating for SigmaGlide finishes to be applied on top of specific systems
    • For use at new-building or maintenance
    • Available in a 20 litre tin in Medium Grey (Sigma 5201)
    • See below for more information on surface preparation, application details and curing times

     

    ReferenceColourSizeGloss Level
    246865Medium Grey (Sigma 5201)20 litresSemi-Gloss

    Product Data


    Two-component, silicone-based tiecoat for fouling release system

    Data for mixed product at 20°C (68°F)
    Number of componentsTwo
    Mass density1.0 kg/l (8.3 lb/US gal)
    Volume solids79 ± 2%
    VOC (Supplied)Directive 1999/13/EC, SED: max. 180.0 g/kg
    max. 184.0 g/l (approx. 1.5 lb/US gal)
    Recommended dry film thickness150 µm (6.0 mils)
    Theoretical spreading rate5.3 m²/l for 150 µm (211 ft²/US gal for 6.0 mils)
    Dry to touch30 minutes
    Overcoating IntervalMinimum: 6 hours
    Shelf lifeBase: at least 36 months when stored cool and dry
    Hardener: at least 36 months when stored cool and dry
    Pot life4 hours at 20°C (68°F)

    Notes:

    • Refer below for more details on spreading rate and film thickness, overcoating intervals and curing times

    Surface Preparation


    Recommended Substrate Conditions and Temperatures

    Substrate conditions

    • Previous coat (specific epoxy) must be dry and free from any contamination and within overcoating time

     

    Substrate Temperature & Application Conditions


    • Substrate temperature during application and curing should be above 10°C (50°F)
    • Substrate temperature during application and curing should be at least 3°C (5°F) above dew point
    • Relative humidity during application and curing should be between 40% and 85%

    System Specification


    • In order to achieve optimal performance from the SIGMAGLIDE system, the individual SIGMAGLIDE products must be applied in strict accordance with the minimum specified dry film thickness and also with the PPG Protective & Marine Coatings SIGMAGLIDE General Working Procedure.
    • Please consult PPG Protective & Marine Coatings for details of the application procedure, which has been prepared to the best of our knowledge and in accordance with worldwide application best practices in order to ensure optimal workmanship and application results

    Application


    Mixing ratio by volume: base to hardener 95:5 (19:1)

    Instructions for Use

    • Open drum just before use
    • Stir base well before use for 5 minutes
    • Add hardener to the base and stir well again for at least 5 minutes
    • No thinner should be added
    • All equipment must be thoroughly cleaned prior to use and before re-use with other materials, to prevent contamination
    • Care must be taken to ensure that overspray of SIGMAGLIDE 790 does not contaminate adjacent areas

     

    Airless Spray


    Recommended thinner

    • No thinner should be added

    Nozzle angle

    • 35° – 60°, depending on nozzle orifice

    Nozzle orifice

    • Approx. 0.43 – 0.53 mm (0.017 – 0.021 in)

    Nozzle pressure

    • 13.0 - 19.0 MPa (approx. 130 - 190 bar; 1886 - 2756 p.s.i.)

     

    Brush/roller


    For small areas only (touch up and repair)

     

    Cleaning Solvent


    Note:

    • The used cleaning solvent must not be allowed to contaminate other paints



    Overcoating interval for SIGMASHIELD 610 for DFT up to 150 µm (6.0 mils)


    Overcoating with...Interval10°C (50°F)20°C (68°F)
    SIGMAGLIDE 790Minimum16 hours6 hours
    Maximum7 days5 days



    Overcoating interval for SIGMASHIELD 620 for DFT up to 150 µm (6.0 mils)


    Overcoating with...Interval20°C (68°F)30°C (86°F)40°C (104°F)
    ItselfMinimum6 hours4 hours2 hours
    Maximum5 days3 days48 hours

    Notes:

    • Note: At temperatures between 10°C (50°C) and 20°C (68°F) SIGMASHIELD 610 should be specified. At temperatures above 20°C (68°C) SIGMASHIELD 620 should be specified.

    Overcoating interval for SIGMAGLIDE 790 for DFT up to 150 µm (6.0 mils)


    Overcoating with...Interval10°C (50°F)20°C (68°F)30°C (86°F)40°C (104°F)
    SIGMAGLIDE 790Minimum30 minutes15 minutes10 minutes10 minutes
    Maximum14 days5 days3 days48 hours
    SIGMAGLIDE 890, SIGMAGLIDE 990 or SIGMAGLIDE 1290Minimum24 hours12 hours10 hours8 hours
    Maximum14 days5 days3 days48 hours

    Notes:

    • Surface should be dry and free from any contamination
    • Relative humidity should be above 40%



    Pot life (at application viscosity)


    Mixed product temperaturePot life
    10°C (50°F)6 hours
    20°C (68°F)4 hours
    30°C (86°F)2 hours

    Safety Precautions


    • For paint and recommended thinners, see information sheets information sheet 1430, information sheet 1431 and the relevant Material Safety Data Sheets in the attachments section above
    • This is a solvent-borne paint and care should be taken to avoid inhalation of spray mist or vapor, as well as contact between the wet paint and exposed skin or eyes

    References


    Product Details
    4169-551355

    Data sheet

    Manufacturer
    PPG
    For Use On
    Steel
    Application Method
    Spray
    Sheen
    Semi Gloss
    Colour
    Standard / Ready Mixed
    Single, Two or Three Pack
    Two-Pack
    Pack Size
    20L
    Parts
    Two
    Base Type
    Solvent-borne
    Solvent
    Silicone
    Mixing Ratio
    19:1
    Suitable Substrates
    Steel
    Key Features
    Adhesion-promoting coating for SigmaGlide finishes
    Application
    Spray
    Touch Dry (at 20°C)
    -
    Dry to Handle (at 20°C)
    -
    Dry to Recoat (at 20°C)
    6 hours
    Fully Cured (at 20°C)
    -
    Pot Life (at 20°C)
    4 hours
    Coverage
    5.3 m²/l for 150 µm (211 ft²/US gal for 6.0 mils)
    Recommended Thinner/Cleaner
    THINNER 90-83 or 50/50 mixture of THINNER 21-06 and THINNER 50-02
    Unit Contents
    Base & hardener
    Compatible Primers
    -
    Compatible Topcoats
    SIGMAGLIDE 790, SIGMAGLIDE 890, SIGMAGLIDE 990 or SIGMAGLIDE 1290
    Max. Application Temperature
    -
    Min. Application Temperature
    10°C (50°F)
    Density
    1.0 kg/l (8.3 lb/US gal)
    Solids by Volume
    79 ± 2%
    Heat Resistance (up-to)
    -
    VOC
    Directive 1999/13/EC, SED: max. 180.0 g/kg max. 184.0 g/l
    Shelf Life (from date of manufacture)
    36 months
    UN Number (Activator)
    UN3066
    UN Number (Base)
    UN1263
    Base Type
    Solvent-Borne
    Suitable For Use On
    Steel
    Finish
    Semi-Gloss
    Application Method
    Spray
    Product Usage Type
    Midcoat
    Product Range
    SigmaGlide
    Colour Family
    Grey
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    PPG SigmaGlide 790 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    PPG Thinner 21-06

    This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info

    Price £38.18 (ex. VAT)
    In Stock and Available for Delivery

    PPG Thinner 90-83

    This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info

    Price £151.80 (ex. VAT)
    In Stock and Available for Delivery

    PPG SigmaGlide 890

    PPG SigmaGlide 890 is a two-component, silicone-based finish for fouling release systems on ships, installations and seawater intakes under all fouling conditions, for new-building or maintenance.Non-toxic Can be used at temperatures above 5°C (41°F) No induction time Can be applied by spray Can be overcoated after 2 hours See below...

    In stock