International Interzone 954 (Rapid Cure) is a faster drying version of Interzone 954 to be used in tidal areas where immersion will be rapid. Designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp...
Teamac Bilge Paint
Teamac Bilge Paint provides protection for the inside surfaces of the hull below the water line. A resilient and hardwearing single pack coating providing available in 4 colours.
Teamac Bilge Paint is a modified long oil alkyd which comes in a gloss finish. Teamac Bilge Paint can be used on the rounded portion and the lowest inner parts of a ship's hull. Teamac Bilge Paint forms a transition between the bottom and the sides of a hull and provides moderate protection against oil and water.
Features & Benefits
- Hardwearing and resilient
- Single Pack formulation
- Use on inner hull walls
- Suitable for use on wood, metal and GRP
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 12m² per litre
- Touch Dry
- 4 Hours
- Brush, Roller, Spray
Be the first to ask a question about this product!
Jotun Jotaguard 690 is a two-component polyamine cured pure epoxy coating that is fast drying and has superb mechanical strength. ADVANTAGES Easy to clean Long lasting Reduced application costs Impact/abrasion resistant Less downtime Certificated
Teamac Marine Matting Agent is a matting additive that is used with Teamac Marine Gloss to produce a variety of finishes including Matt, Satin or Semi-Gloss. Designed to easily mix with Teamac Marine Gloss and can also be used with Teamac Metalcote. Please see the remarks section for usage guidelines and recommended mixing ratios to achieve various gloss...
Teamac Boot-topping is an interface coating for use between the waterline and the deck coatings, provides a hard surface less receptive to marine growth and is polish-able to remove grime.
A surface tolerant from Jotun that is a high build epoxy coating suitable for environments with very high corrosivity, such as areas in the splash or tidal zones. Jotun Marathon 500 is a two component polyamine cured epoxy coating. It's a surface tolerant, high solids, high build product that will continue to cure even when immersed in water.
Jotun Marathon IQ GF is a two component polyamine cured epoxy coating that is high build, solvent free, glass flake reinforced and is highly scratch resistant. Suitable for environments with very high corrosivity and can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly...
International Interzone 954 is a two component, low VOC, high solids, modified epoxy barrier coat designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces.
Jotun Jotaguard 660 is a two component polyamine cured pure epoxy coating that is a fast drying, surface tolerant, very abrasion and impact resistant, high solids, high build product. Specially designed as a high performance coating for cargo holds it can be used as primer or finish coat in atmospheric and immersed environments.
Jotun Jotaguard 690 S is a two component polyamine cured pure epoxy coating that is a fast drying, high solids, high build product. It has excellent abrasion, impact and scratch resistant and is specially designed as a premium finish coat for cargo holds where extended repair intervals are required, even when operating with the toughest exposure.
Anti-slip marine coating specially made for the decks of sea faring vessels which is a ready mixed, aggregated coating which provides a rough anti-slip finish when dry to provide extra protection for crew-members while traversing the deck of a boat in motion or vessel in rough seas.
International Interzone 1000 is one of the most proven and reliable glass flake epoxies on the market today, with documented in-service performance dating back almost 30 years. International Interzone 1000 provides outstanding abrasion and corrosion resistance to steelwork located in the harshest offshore and inland environments.
Bird Brand Refined Coal Tar / Brushing Tar is designed for applications where protection and corrosion resistance is of prime importance and decorative effect a secondary consideration. Painting tar is generally used for heavy duty protection of timber, marine vessels and structures etc. and is also resistant to sea water.
International Interzone 505 is a high solids, low VOC, high build epoxy primer/intermediate or finish coat, reinforced with chemically resistant high aspect ratio glass flake for enhanced durability and corrosion resistance to provide excellent long term, anti-corrosive and anti-abrasion protection in both new construction and maintenance situations.
Jotun Jotaguard 630 is a two component polyamine cured epoxy coating that is a fast drying, surface tolerant, hard wearing, high solids, high build product. Specially designed for general use in cargo holds and can be used as primer or finish coat in atmospheric and immersed environments.
Carboline Carboclean Gel 100 is a biologically degradable surface cleaner without any hazardous substances. Can be disposed to drains/sewage systems without containment. Top Features Removes rust, chalk, magnetite, salt, algae and other deposits. Well-suited for treatment of ceilings, walls. Works as a treatment of metals and...
International Interlac 668 is a one pack, alkyd based, high visibility coating for application to marker buoys and as a safety marker on board ship. International Interlac 668 is for use at Newbuilding, Maintenance & Repair or On Board Maintenance.