Jotun Marathon IQ GF
  • Jotun Marathon IQ GF

Jotun Marathon IQ GF

0EPREDLVA 0EP001LVA

Jotun Marathon IQ GF is a two component polyamine cured epoxy coating that is high build, solvent free, glass flake reinforced and is highly scratch resistant. Suitable for environments with very high corrosivity and can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates.

Colour
Size
Finish
£260.09
VAT excluded

£312.11 Tax incl.
Quantity

Description

Jotun Marathon IQ GF is a two component polyamine cured epoxy coating that is high build, solvent free, glass flake reinforced and is highly scratch resistant. Suitable for environments with very high corrosivity and can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates.

Areas of Use
Marine: Specially suited in areas where high scratch resistance is required. Specially designed for ice going vessels. May be used as anode shield around ICCP anodes.
Protective: Suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed. Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Compatible with cathodic protection systems.

Approvals and certificates

  • Pre-qualification testing in acordance with NORSOK M-501, Rev. 3, System 7, suitable for splash zone
  • Type approval for ice trade by Rusian Maritime Register of shipping

Additional certificates and approvals may be available on request.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
0EPREDLVA 0EP001LVA

Data sheet

Application
Brush, Spray
Coverage
3.3m² per litre
Touch Dry
3 hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Teamac Deck Paint Smooth

Teamac Deck Paint Smooth is a conventional, durable, protective coating for wood and metal decks. It can be used on suitably prepared wood and metal decks as well as directly to GRP decks.

Price £29.28
In stock

International Interzone 954BG

International Interzone 954BG is a two component, low VOC, high solids, modified epoxy barrier coating that will continue to cure when immersed in water and has excellent cathodic disbondment resistance. Specifically designed to provide long term steel protection via brush or roller application techniques where the performance of Interzone 954 is required...

Price £103.49
In stock

PPG SigmaCover 522

PPG SigmaCover 522 is a two-component, micaceous iron oxide-pigmented, polyamide-cured epoxy primer/sealer/coating. It has excellent adhesion to, and sealing of, weathered, cleaned, zinc-rich primers and metal-sprayed steel, with good adhesion to properly pre-treated galvanized steel. Can be used in systems for atmospheric or water-immersed...

Price £74.12
In stock

PPG SigmaCover 456 HS

PPG SigmaCover 456 HS is two component high solids polyamide cured recoatable zinc phosphate epoxy primer/coating. This general-purpose epoxy primer/coating is available in 350+ colours from RAL and BS, for steel and concrete structures in atmospheric exposure that can be recoated with various two-component and conventional coatings, even...

Price £462.00
In stock

International Interzone 954

International Interzone 954 is a two component, low VOC, high solids, modified epoxy barrier coat designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces.

Price £98.71
In stock

Jotun Marathon 500

A surface tolerant from Jotun that is a high build epoxy coating suitable for environments with very high corrosivity, such as areas in the splash or tidal zones. Jotun Marathon 500 is a two component polyamine cured epoxy coating. It's a surface tolerant, high solids, high build product that will continue to cure even when immersed in water.

Price £214.50
In stock

Jotun Jotaguard 630

Jotun Jotaguard 630 is a two component polyamine cured epoxy coating that is a fast drying, surface tolerant, hard wearing, high solids, high build product. Specially designed for general use in cargo holds and can be used as primer or finish coat in atmospheric and immersed environments. 

Price £146.37
In stock

Jotun Jotaguard 690

Jotun Jotaguard 690 is a two-component polyamine cured pure epoxy coating that is fast drying and has superb mechanical strength. ADVANTAGES Easy to clean Long lasting Reduced application costs Impact/abrasion resistant Less downtime Certificated

Price £179.01
In stock

Teamac Bilge Paint

Teamac Bilge Paint provides protection for the inside surfaces of the hull below the water line. A resilient and hardwearing single pack coating providing available in 4 colours. 

Price £14.50
In stock

International Interzone 954 (Rapid Cure)

International Interzone 954 (Rapid Cure) is a faster drying version of Interzone 954 to be used in tidal areas where immersion will be rapid. Designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp...

Price £98.71
In stock

Teamac Black Tar Varnish

Teamac Black Tar Varnish is a synthetic tar varnish for industrial, agricultural and marine use. It is used for the protection of (weathered) wood, metal and other surfaces, inside or outside and should be used on barns, farm buildings, roofs etc. and marine applications.

Price £32.29
In stock

International Interzone 1000

International Interzone 1000 is one of the most proven and reliable glass flake epoxies on the market today, with documented in-service performance dating back almost 30 years. International Interzone 1000 provides outstanding abrasion and corrosion resistance to steelwork located in the harshest offshore and inland environments.

Price £433.16
In stock

Teamac Suregrip Deck Paint

Teamac Suregrip Deck Paint, is a modified alkyd, ready mixed, aggregated deck coating which provides a rough anti-slip finish when dry Suitable for: Foot traffic Light truck traffic Use on wood Use on metal Use on concrete Use on GRP Available in a range of colours Click to jump down to Technical Data

Price £17.01
In stock

Jotun Jotaguard 690 S

Jotun Jotaguard 690 S is a two component polyamine cured pure epoxy coating that is a fast drying, high solids, high build product. It has excellent abrasion, impact and scratch resistant and is specially designed as a premium finish coat for cargo holds where extended repair intervals are required, even when operating with the toughest exposure.

Price £210.60
In stock

Carboline Carboclean Gel 100

Carboline Carboclean Gel 100 is a biologically degradable surface cleaner without any hazardous substances. Can be disposed to drains/sewage systems without containment. Top Features Removes rust, chalk, magnetite, salt, algae and other deposits. Well-suited for treatment of ceilings, walls. Works as a treatment of metals and...

Price £30.38
In stock

Jotun Jotaguard 660

Jotun Jotaguard 660 is a two component polyamine cured pure epoxy coating that is a fast drying, surface tolerant, very abrasion and impact resistant, high solids, high build product. Specially designed as a high performance coating for cargo holds it can be used as primer or finish coat in atmospheric and immersed environments.

Price £162.51
In stock