Teamac Marine Satin Finish

509/G150

Teamac Marine Satin Finish, is a traditional high quality, modified long oil alkyd marine coating. It has a good resistance to oil and water and has been designed for use in a marine environment. Can be used where low reflection and glare is required such as boat roofs. Dries to a durable satin finish.

  • A traditional satin finish for the marine environment
  • Satin sheen ideal where low reflection and glare is required
  • Perfect for use on boat roofs
  • Dries to a durable satin finish
  • Click to jump down to Technical Data

Colour
Size
Finish
£12.65
£15.17 Incl. VAT
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

100% secure payments
Description

Teamac Marine Satin Finish, is a traditional high quality, modified long oil alkyd marine coating.  It has a good resistance to oil and water and has been designed for use in a marine environment.  Can be used where low reflection and glare is required such as boat roofs.  Dries to a durable satin finish.



Click To Jump To Section:




Features & Benefits


Advantages

  • A traditional satin finish for the marine environment.
  • Satin sheen ideal where low reflection and glare is required.
  • Perfect for use on boat roofs.
  • Dries to a durable satin finish.
  • Click to jump down to Technical Data



Product Specification


Technical Data
Volume Solids 50 to 52.6%
VOC Content Max 394.04 g/litre
SG 1.17 to 1.31°C
Viscostity 4.5 Poise @ 25°C
Flash Point Above 32°C (closed cup)



Film Thickness Range And Coverage


Product Data
  Dry Film Thickness Wet Film Thickness Theoretical Coverage
Maximum 35 - 40 µm 75 µm 13 m2/litre @ 35 microns D.F.T.



The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.



Drying Times


Drying Times At 20°C/RH 50%
Touch Dry: 5 Hours
Dry To Handle: 24 Hours
Dry To Recoat: 12 hours or overnight
Fully Cured: 5 - 7 Days



Low temperature and high humidity will adversely affect application, drying and performance of any coating.



Surface Preparation


  • All surfaces should be clean, dry, sound and free from contaminants.
  • Surfaces have to be prepared and primed with the suitable primer for that substrate.
  • Can be used directly on GRP.
  • Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced.
  • Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.



Preceeding Coat




Mixing


  • Mix well before use.



Application Conditions


  • As dictated by normal good painting practice.
  • Care must be taken during application that the temperature is above the dew point to avoid any contamination.
  • In confined spaces, provide adequate ventilation during application and drying.



Application Methods


Method Airless Spray Conventional Spray Brush Roller
  Yes No Yes Yes



  • Thinner (Max vol): Thinners 14 (10%) - Brush, roller and airless spray.
  • Nozzle Size: N/A
  • Nozzle Pressure: 1800 to 2000 psi
  • Cleaning Solvent: Thinners 14



Health & Safety


See safety data sheet  SDS 20631 in the attachements section above.

Click to go back to the top of the page

Product Details
509/G150

Data sheet

Application Method
Brush, Roller, Spray
Sheen
Satin
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
1L
Key Features
A traditional satin finish for the marine environment. Satin sheen ideal where low reflection and glare is required. Perfect for use on boat roofs. Dries to a durable satin finish.
Application
Brush, Roller, Spray
Dry to Handle (at 20°C)
24 Hours
Dry to Recoat (at 20°C)
12 hours or overnight
Dry to Recoat (at 20°C)
12 Hours
Fully Cured (at 20°C)
5 - 7 Days
Coverage
13m² per litre
Recommended Thinner/Cleaner
Teamac Thinner 14
Solids by Volume
50 to 52.6%
VOC
Max 394.04 g/litre
Touch Dry
5 Hours
Finish
Satin finish
Recommended Dry Film Thickness
35 - 40 µm
Recommended Wet Film Thickness
75 µm
UN Number
1263
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Teamac Aluminium Wood Primer

Teamac Aluminium Wood Primer, is an oil based primer that contains aluminium.  Used primarily to prevent staining on knotted or resinous timber, but also acts as an excellent heavy duty primer. Suitable for Narrowboats, Cruisers, Barges, Yachts and other Marine Applications.  It can be applied to suitably prepared timbers and boards....

Price £13.03
In Stock and Available for Delivery

Teamac Thinner 14

A specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistancy for application. Suitable for use with Brush, Roller or Spray. Teamac Thinner 14 can also be used for the cleaning of some surfaces prior to application of the coating. Also suitable for the cleaning of...

Price £9.19
In Stock and Available for Delivery

General Painting Application Kit

General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

Price £10.03
In Stock and Available for Delivery

Teamac Zinc Phosphate Primer

Teamac Zinc Phosphate Primer, an anticorrosive primer on iron and steel, for use with a range of conventional topcoats such as Teamac Marine Gloss and Teamac Metalcote Plant Enamel. Can be used for: Marine purposes Fire escapes Metal gates Metal garage doors Ideal in coastal areas Click to jump down to Technical Data Coverage...

Price £10.96
In Stock and Available for Delivery