Zingatarfree (formerly PU Tarfree MIO) is ideal for marine environments and immersion, such boat hulls, with excellent water, corrosion and chemical resistance, and can be used as a replacement for normal coal tar products
Zingatarfree (formerly PU Tarfree MIO), a one-pack polyurethane paint with excellent water and corrosion resistance, ideal for use in offshore and in-land marine environments and as a replacement for normal coal tar products.
Recommended for use in duplex systems with Zinga for application on structures in immersion or embedded in soil, Zingatarfree can be painted directly over Zinga on narrow-boat hulls, tug-boats, on the base of electricity pylons-legs (to keep out both local ground-water and also stray-currents from nearby electrified railway tracks) and also on brand-new truck chassis.
Features
Apply by brush, roller, conventional spray-gun or airless spray
Excellent chemical and salt resistance
Ideal for immersion & subterranean applications
Poison free - does not leach poisonous phenols into the environment
Application
Zingatarfree can be applied on top of ZINGA by brush and roller, conventional spray-gun or airless spraying.
For more specific and detailed recommendations concerning application, please contact our technical team on 0113 2455450. For detailed information about the health and safety hazards and precautions for use, refer to the safety data sheet in the attachments tab above.
20-30 μm DFT (Dry Film Thickness; to be measured above the peaks of the roughness profile), diluted 10-15%
Full coat
2 hours after touch dry, DFT no more than 70-80 μm per layer
Coverage
DFT = Dry Film Thickness; to be measured above the peaks of the roughness profile
Theoretical coverage
For 80 μm DFT: 8,3 m²/L
For 100 μm DFT: 6,6 m²/L
For 150 μm DFT: 4,4 m²/L
Theoretical consumption
For 80 μm DFT: 0,12 L/m²
For 100 μm DFT: 0,15 L/m²
For 150 μm DFT: 0,23 L/m²
Drying Times
For 80 μm DFT at relative humidity of 75%:
Temperature
Drying Times
10°C
Dustdry: 2.5 hours
Tackfree: 4 hours
Dry: 8 hours
20°C
Dustdry: 1 hours
Tackfree: 2.5 hours
Dry: 6 hours
30°C
Dustdry: 40 minutes
Tackfree: 1.5 hours
Dry: 4 hours
Drying time before immersion - A curing time of 3 days has to be respected before immersion of the Zingatarfree.
Overcoating
For 80 μm DFT at relative humidity of 75%:
Temperature
Drying Times
10°C
Minimum: 24 hours
Maximum: 3 months
20°C
Minimum: 6 hours
Maximum: 1 month
30°C
Minimum: 4 hours
Maximum: 1 week
Note: At longer intervals a good cleaning is necessary to avoid intermediate coat contamination which could disturb the adherence of the next coat.
Recommended System
Tested according to ISO12944 in immersion in salt or brackish water (Im²) or in the ground (Im3) with high classification (Life expectancy > 15 years):
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Zinga Zingatarfree is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Zinga is a one-component anti-corrosion zinc coating system that provides cathodic protection to steel comparable with hot-dip galvanising, with the added advantage that it can be applied as though it were a paint, and is certified to not spread flame or create smoke (BS476 parts 6&7).Can protect longer than hot-dip galvanising (at the...
Zingasolv is the recommended thinner to be used with Zinga, Zingalu and Alu ZM when spraying. It can also be used for cleaning equipment.More Information Delivery Info
Use Zinga Thinner 41 to dilute Zinga Zingalufer (formerly Alufer N) and Zingatarfree (formerly PU Tar Free MIO) for use with sprayers during application.More Information Delivery Info
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...