PPG Sigmarine 48

    7238
    PPG3951

    PPG Sigmarine 48 is a general purpose gloss paint based on an alkyd-modified resin that is particularly suitable as a finish for boottop, topside, deck and deck equipment.

    • Quick-drying
    • Water and weather resistant coating
    • Can be applied over most intact alkyd paints
    • Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours

    Product customisation

    Don't forget to save your customization to be able to add to cart
    • 250 char. max
    Colour Group
    Size
    Finish
    £107.03(ex. VAT)
    £128.43 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    PPG Sigmarine 48 is a general purpose gloss paint based on an alkyd-modified resin that is particularly suitable as a finish for boottop, topside, deck and deck equipment. Sigmarine 48 is particularly suitable for areas intermittently exposed to water-immersion and atmospheric conditions.

    Top Features & Benefits


    • A quick-drying, hard, tough, water and weather resistant coating with moderate gloss retention
    • Can be applied over most intact alkyd paints
    • Also available with non-skid material (supplied separately) for use on deck surfaces
    • Gloss finish

    Preparation & Application


    Recommended Substrate Conditions and Temperatures

    Substrate Conditions

    • Previous suitable coat must be dry and free from any contamination
    • Previous coat: surface should be sufficiently roughened if necessary
    • Substrate temperature during application should not exceed 50°C (122°F)
    • Substrate temperature during application should be at least 3°C (5°F) above dew point

     

    System Specification

     

    Instructions for Use

    Stir well before use. The temperature of the paint should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity. Adding too much thinner results in reduced sag resistance. Adequate ventilation must be maintained during application and curing (please refer to INFORMATION SHEETS 1433 and 1434).

     

    Air Spray

    Recommended thinner: PPG Thinner 20-05

    Volume of thinner: 10 - 15%, depending on required thickness and application conditions

    Nozzle orifice: 2.0 – 3.0 mm (approx. 0.079 – 0.110 in)

    Nozzle pressure: 0.3 - 0.4 MPa (approx. 3 - 4 bar; 44 - 58 p.s.i.)

     

    Airless Spray

    Recommended thinner: PPG Thinner 20-05

    Volume of thinner: 0 - 2%, depending on required thickness and application conditions

    Nozzle orifice: Approx. 0.48 mm (0.019 in)

    Nozzle pressure: 8.0 - 12.0 MPa (approx. 80 - 120 bar; 1161 - 1741 p.s.i.)

     

    Brush/Roller

    Recommended thinner: PPG Thinner 20-05

    Volume of thinner: 0 – 2%

     

    Cleaning Solvent

    PPG Thinner 20-05

     

    Safety Precautions
    For paint and recommended thinners see INFORMATION SHEETS 1430, 1431 and relevant Material Safety Data Sheets. This is a solvent-borne paint and care should be taken to avoid inhalation of spray mist or vapour, as well as contact between the wet paint and exposed skin or eyes.

    Product Data


    Data for Product at 20°C (68°F)
    Number of componentsOne
    Mass density1.0 kg/l (8.3 lb/US gal)
    Volume solidsWhite: 44 ± 3%
    VOC (Supplied)Directive 1999/13/EC, SED: max. 400.0 g/kg. max. 453.0 g/l (approx. 3.8 lb/US gal)
    Recommended dry film thickness35 µm (1.4 mils) per coat
    Theoretical spreading rate12.6 m²/l for 35 µm (504 ft²/US gal for 1.4 mils)
    Dry to touch3 hours
    Overcoating intervalMinimum: 24 hours. Maximum: Unlimited
    Shelf lifeAt least 24 months when stored cool and dry

    Overcoating interval for DFT up to 35 µm (1.4 mils)
    Overcoating with...Interval5°C (41°F)20°C (68°F)
    ItselfMinimum
    Maximum
    32 hours
    Unlimited
    24 hours
    Unlimited

    Curing time for DFT up to 35 µm (1.4 mils)
    Substrate Temp.Dry to touch
    5°C (41°F)5 hours
    20°C (68°F)3 hours

    References


    Product Details
    3951-856269

    Data sheet

    Manufacturer
    PPG
    Application Method
    Brush, Roller, Spray
    Sheen
    Gloss
    Colour
    Fully Tintable
    Single, Two or Three Pack
    Single
    Pack Size
    5L, 20L
    Parts
    One
    Base Type
    Alkyd-modified resin
    Solvent
    Solvent-borne
    Mixing Ratio
    -
    Suitable Substrates
    Boottop, topside, deck and deck equipment
    Key Features
    Quick-drying, water and weather resistant, can be applied over most intact alkyd paints
    Application
    Brush, Roller, Spray
    Touch Dry (at 20°C)
    3 hours
    Dry to Handle (at 20°C)
    -
    Dry to Recoat (at 20°C)
    24 hours
    Fully Cured (at 20°C)
    -
    Pot Life (at 20°C)
    -
    Coverage
    -12.6 m²/l for 35 µm (504 ft²/US gal for 1.4 mils)
    Recommended Thinner/Cleaner
    PPG Thinner 20-05
    Unit Contents
    -
    Compatible Primers
    -
    Compatible Topcoats
    Itself
    Max. Application Temperature
    50°C (122°F)
    Min. Application Temperature
    At least 3°C (5°F) above dew point
    Density
    1.0 kg/l (8.3 lb/US gal)
    Solids by Volume
    White: 44 ± 3%
    Heat Resistance (up-to)
    -
    VOC
    Directive 1999/13/EC, SED: max. 400.0 g/kg. max. 453.0 g/l (approx. 3.8 lb/US gal)
    Shelf Life (Once Opened)
    At least 24 months when stored cool and dry
    UN Number
    UN1263
    Base Type
    Alkyd
    Finish
    Gloss
    Application Method
    Roller
    Application Method
    Brush
    Application Method
    Spray
    Product Usage Type
    Topcoat
    Product Range
    Sigmarine
    Colour Family
    Orange
    Colour Family
    Cream
    Colour Family
    Yellow
    Colour Family
    Green
    Colour Family
    White
    Colour Family
    Red
    Colour Family
    Pink
    Colour Family
    Anthracite Grey
    Colour Family
    Purple
    Colour Family
    Grey
    Colour Family
    Black
    Colour Family
    Blue
    Colour Family
    Neutral
    Colour Family
    Brown
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    PPG Sigmarine 48 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    PPG Thinner 20-05

    This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info

    Price £30.90 (ex. VAT)
    In Stock and Available for Delivery