PPG Thinner 21-06
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
£42.59 (incl. VAT)
£35.49 (ex. VAT)
In Stock and Available for Delivery
- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
PPG SigmaFast 40 is a one component, high-build finish coating based on modified alkyd resin that is suitable for atmospheric exposure conditions. Fast drying with good gloss and colour retention - not suitable for immersion in water.
- Available in 2,300+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours
- Suitable for atmospheric exposure conditions
- Fast handling - touch dry in just 45 minutes, overcoat after 4 hours
- See below for more information on surface preparation, application details and curing times
Product customisation
Don't forget to save your customization to be able to add to cartDescription
PPG SigmaFast 40 is a one component, high-build finish coating based on modified alkyd resin that is suitable for atmospheric exposure conditions. Fast drying with good gloss and colour retention - not suitable for immersion in water.
Features & Benefits
- Available in 2,300+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours
- Suitable for atmospheric exposure conditions
- One component
- Fast drying
- Fast handling
- Touch dry in just 45 minutes
- Overcoat after 4 hours
- Good gloss and colour retention
- Not suitable for immersion in water
- See below for more information on surface preparation, application details and curing times
Product Data
High-build finish coating, based on modified alkyd resin
| Data for mixed product at 20°C (68°F) | |
|---|---|
| Number of components | One |
| Mass density | 1.3 kg/l (10.8 lb/US gal) |
| Volume solids | 45 ± 2% |
| VOC (Supplied) | Directive 1999/13/EC, SED: max. 390.0 g/kg |
| UK PG 6/23(92) Appendix 3: max. 490.0 g/l (approx. 4.1 lb/US gal) | |
| Recommended dry film thickness | 50 µm (2.0 mils) per coat |
| Theoretical spreading rate | 9.0 m²/l for 50 µm (361 ft²/US gal for 2.0 mils) |
| Dry to touch | 45 minutes |
| Overcoating Interval | Minimum: 4 hours |
| Maximum: Unlimited | |
| Shelf life | At least 24 months when stored cool and dry |
Notes:
- Refer below for more details on spreading rate and film thickness, overcoating intervals and curing times
Surface Preparation
Recommended Substrate Conditions and Temperatures
Substrate conditions
- Previous coat must be dry and free from any contamination
- Old existing sound coating; sufficiently roughened, dry and cleaned
Substrate Temperature & Application Conditions
- Substrate temperature during application should be above 5°C (41°F)
- Substrate temperature during application should be at least 3°C (5°F) above dew point
Application
Instructions for Use
- Stir well before use
- The temperature of the paint should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity
- Adding too much thinner results in reduced sag resistance
- Adequate ventilation must be maintained during application and curing (please refer to INFORMATION SHEETS 1433 and 1434)
Air Spray
Recommended thinner
Volume of thinner
- 5 - 10%, depending on required thickness and application conditions
Nozzle orifice
- 1.5 – 2.0 mm (approx. 0.060 – 0.079 in)
Nozzle pressure
- 0.3 - 0.4 MPa (approx. 3 - 4 bar; 44 - 58 p.s.i.)
Airless Spray
Recommended thinner
- THINNER 21-06
Volume of thinner
- 0 - 5%, depending on required thickness and application conditions
Nozzle orifice
- Approx. 0.38 – 0.48 mm (0.015 – 0.019 in)
Nozzle pressure
- 12.0 - 16.0 MPa (approx. 120 - 160 bar; 1741 - 2321 p.s.i.)
Brush/roller
Recommended thinner
- THINNER 21-06
Volume of thinner
- 0 – 2%
Cleaning Solvent
- Thinner 21-06
Overcoating interval for DFT up to 50 µm (2.0 mils)
| Overcoating with... | Interval | 10°C (50°F) | 15°C (59°F) | 20°C (68°F) | 30°C (86°F) |
|---|---|---|---|---|---|
| Itself | Minimum | 8 hours | 6 hours | 4 hours | 3 hours |
| Maximum | Unlimited | Unlimited | Unlimited | Unlimited |
Notes:
- Surface should be dry and free from any contamination
Safety Precautions
- For paint and recommended thinners, see information sheets information sheet 1430, information sheet 1431 and the relevant Material Safety Data Sheets in the attachments section above
- This is a solvent-borne paint and care should be taken to avoid inhalation of spray mist or vapour, as well as contact between the wet paint and exposed skin or eyes
References
- Conversion Tables (information sheet 1410)
- Explanation to product data sheets (information sheet 1411)
- Safety Indicators (information sheet 1430)
- Safety in Confined Space and Health Safety, Explosion Hazard - Toxic Hazard (information sheet 1431)
- Safe Working in Confined Spaces (information sheet 1433)
- Directives for Ventilation Practice (information sheet 1434)
- Relative humidity - Substrate Temperature - Air Temperature (information sheet 1650)
Product Details
4168-856915
Data sheet
- Manufacturer
- PPG
- Water / Solvent Based
- Solvent
- For Use On
- Steel
- Application Method
- Brush, Roller, Spray
- Sheen
- Semi Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L, 20L
- Parts
- One
- Base Type
- Solvent-borne
- Solvent
- Modified alkyd resin
- Mixing Ratio
- -
- Suitable Substrates
- Steel
- Key Features
- suitable for atmospheric exposure conditions
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 45 mins
- Dry to Handle (at 20°C)
- -
- Dry to Recoat (at 20°C)
- 4 hours
- Fully Cured (at 20°C)
- 45 minutes
- Pot Life (at 20°C)
- -
- Coverage
- 9.0 m²/l for 50 µm (361 ft²/US gal for 2.0 mils)
- Recommended Thinner/Cleaner
- THINNER 21-06
- Unit Contents
- -
- Compatible Primers
- -
- Compatible Topcoats
- -
- Max. Application Temperature
- -
- Min. Application Temperature
- 5°C (41°F)
- Density
- 1.3 kg/l (10.8 lb/US gal)
- Solids by Volume
- 45 ± 2%
- Heat Resistance (up-to)
- -
- VOC
- Directive 1999/13/EC, SED: max. 390.0 g/kg UK PG 6/23(92) Appendix 3: max. 490.0 g/l
- Shelf Life (from date of manufacture)
- 24 months
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Primed Surfaces
- Suitable For Use On
- Steel
- Finish
- Semi-Gloss
- Application Method
- Roller
- Application Method
- Brush
- Application Method
- Spray
- Usages
- High Build
- Usages
- Gloss Retention
- Usages
- Atmospheric
- Usages
- Colour Retention
- Product Usage Type
- Topcoat
- Product Range
- SigmaFast
- Colour Family
- Orange
- Colour Family
- Yellow
- Colour Family
- Green
- Colour Family
- Neutral
- Colour Family
- Red
- Colour Family
- Pink
- Colour Family
- Purple
- Colour Family
- Grey
- Colour Family
- White
- Colour Family
- Blue
- Colour Family
- Brown
- Product Type
- Synthetic Alkyd
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 45 mins
- Product Attributes
- Colour Retention
- Product Attributes
- Gloss Retention
 Chris Jeffery on 2022-01-02 16:09:14 | Question: Would this be suitable for painting my Lugarde summer house. I believe they use Sigma paint. Thanks. |
Answer from Rawlins’ Technical Team: We wouldn’t recommend this product for your application, assuming the timber is clean, dry, sound and prepared as detailed in the technical data sheet we can recommend Zanders PF59 Stain Blocking Primer Finish followed by Wethertex OT25 Wood-Flex Satin Opaque Timber Paint for this application. This is available in many RAL and BS colours in matt finish. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
PPG SigmaFast 40 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like