PPG Thinner 90-53
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
£42.59 (incl. VAT)
£35.49 (ex. VAT)
PPG SigmaShield 460 is a two-component, high solids glass flake reinforced polyamine adduct epoxy coating for long-term protection at areas subject to heavy wear and tear, with very low water permeability, (due to glass flake barrier) and resistance to splash and spillage of a wide range of chemicals.
PPG SigmaShield 460 a two-component, high solids glass flake reinforced polyamine adduct epoxy coating for long-term protection at areas subject to heavy wear and tear, with very low water permeability, (due to glass flake barrier) and resistance to splash and spillage of a wide range of chemicals.
Reference | Colour | Size | Gloss Level |
---|---|---|---|
191640 | Black | 20 litres | Gloss |
204819 | Light Grey (RAL 7035) | 20 litres | Gloss |
257093 | Off White | 20 litres | Gloss |
Other light colours can be made on request; contact our sales team on 0113 2455450 or [email protected] to discuss your requirements.
Data for mixed product at 20°C (68°F) | |
---|---|
Number of components | Two |
Mass density | 1.5 kg/l (12.5 lb/US gal) |
Volume solids | 81 ± 2% |
VOC (Supplied) | Directive 1999/13/EC, SED: max. 165.0 g/kg |
max. 246.0 g/l (approx. 2.1 lb/US gal) | |
Recommended dry film thickness | 250 - 400 µm (10.0 - 16.0 mils) depending on system |
Theoretical spreading rate | 3.2 m²/l for 250 µm (130 ft²/US gal for 10.0 mils) |
2.0 m²/l for 400 µm (81 ft²/US gal for 16.0 mils) | |
Dry to touch | 3 hours |
Pot life | 1.5 hours at 20°C (68°F) |
Overcoating Interval | Minimum: 16 hours |
Maximum: 28 days | |
Shelf life | Base: at least 24 months when stored cool and dry |
Hardener: at least 24 months when stored cool and dry |
Notes:
Recommended Substrate Conditions and Temperatures
Substrate conditions
IMO-MSC.215(82) requirements for water ballast tanks
Substrate Temperature & Application Conditions
Instructions for Use
Mixing ratio by volume: base to hardener 75:25 (3:1)
Induction time
Air spray
Recommended thinner
Volume of thinner
Nozzle orifice
Nozzle pressure
Airless spray
Recommended thinner
Volume of thinner
Nozzle orifice
Nozzle pressure
Brush/roller
Cleaning Solvent
DFT | Theoretical spreading rate |
---|---|
250 µm (10.0 mils) | 3.2 m²/l (130 ft²/US gal) |
400 µm (16.0 mils) | 2.0 m²/l (81 ft²/US gal) |
Notes:
Overcoating interval for DFT up to 400 µm (16.0 mils)
Overcoating with... | Interval | 5°C (41°F) | 10°C (50°F) | 20°C (68°F) | 30°C (86°F) | 40°C (104°F) |
---|---|---|---|---|---|---|
Itself | Minimum | 48 hours | 32 hours | 16 hours | 12 hours | 8 hours |
Maximum | 28 days | 28 days | 28 days | 14 days | 7 days |
Curing time for DFT up to 400 µm (16.0 mils)
Substrate temperature | Dry to touch | Dry to handle | Service- water immersion |
---|---|---|---|
5°C (41°F) | 16 hours | 30 hours | 14 days |
10°C (50°F) | 8 hours | 16 hours | 10 days |
20°C (68°F) | 3 hours | 8 hours | 5 days |
30°C (86°F) | 2 hours | 5 hours | 4 days |
40°C (104°F) | 1 hour | 3 hours | 3 days |
Notes:
Pot Life (at application viscosity)
Mixed product temperature | Pot life |
---|---|
10°C (50°F) | 3 hours |
20°C (68°F) | 1.5 hours |
30°C (86°F) | 45 minutes |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
PPG SigmaShield 460 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
£42.59 (incl. VAT)
£35.49 (ex. VAT)
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
£42.59 (incl. VAT)
£35.49 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)