PPG Thinner 90-53
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
£42.59 (incl. VAT)
£35.49 (ex. VAT)
In Stock and Available for Delivery
- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
PPG Sigmarine 35 is a micaceous iron oxide (MIO) alkyd topcoat with excellent resistance to atmospheric industrial exposure conditions and UV.
- Quick drying - touch dry after 1 hour
- Can be overcoated after 16 hours (at 20°C)
- One-component
- For air spraying or brush/roller
Description
PPG Sigmarine 35, a one-component micaceous iron oxide (MIO) alkyd topcoat with excellent resistance to atmospheric industrial exposure conditions and UV.
Features & Benefits
- Excellent resistance to atmospheric industrial exposure conditions
- High UV resistance
- Mio effect
- Quick drying - touch dry after 1 hour
- Can be overcoated after 16 hours (at 20°C)
- For air spraying or brush/roller
| Reference | Colour | Size | Gloss Level |
|---|---|---|---|
| 117055 | Dark Grey (Sigma 9558) | 4 litres | Gloss |
| 102834 | Dark Grey (Sigma 9558) | 20 litres | Gloss |
| 101545 | Light Grey (Sigma 9553) | 4 litres | Gloss |
Product Data
| Data for mixed product at 20°C (68°F) | |
|---|---|
| Number of components | Two |
| Mass density | 1.5 g/cm³ |
| Volume solids | 51% ± 2% |
| VOC (Supplied) | max. 254 g/kg (Directive 1999/13/EC, SED) |
| max. 391 g/l (approx. 3.3 lb/gal) | |
| (UK PG 6/23(92) Appendix 3) | |
| Recommended dry film thickness | 50 - 75 μm |
| Theoretical spreading rate | 10.2 m²/l for 50 μm |
| 6.8 m²/l for 75 μm | |
| Dry to touch | 1 hour |
| Overcoating Interval | Minimum: 16 hours |
| Maximum: Unlimited | |
| Shelf life | At least 12 months |
Surface Preparation
Recommended Substrate Conditions and Temperatures
- Suitable primer; (e.g. Sigmarine 24) dry and free from any contamination
- Previous suitable coat; dry and free from any contamination and sufficiently roughened if necessary
- Substrate temperature should be at least 3°C above dew point but not above 50°C
Application
Instructions for Use
- Stir well before use
- The temperature of the paint should preferably be above 15°C, otherwise extra thinner may be required to obtain application viscosity
- Too much solvent results in reduced sag resistance
- Adequate ventilation must be maintained during application and curing (please refer to information sheets information sheet 1433 and information sheet 1434
Air spray
Recommended thinner
Volume of thinner
- 5 - 15%, depending on required thickness and application conditions
Nozzle orifice
- 1.5 – 3.0 mm
Nozzle pressure
- 0.2 - 0.3 MPa (= approx. 2 - 3 bar; 29 - 44 p.s.i.)
Airless spray
Recommended thinner
- Thinner 20-05
Volume of thinner
- 0 - 5%, depending on required thickness and application conditions
Nozzle orifice
- Approx. 0.46 mm (= 0.018 in)
Nozzle pressure
- 12 - 15 MPa (= approx. 120 - 150 bar; 1740 - 2176 p.s.i.)
Brush/roller
Recommended thinner
- Thinner 20-05
Volume of thinner
- 0 - 2%
Cleaning Solvent
- Thinner 20-05
Safety Precautions
- This is a solvent-borne paint and care should be taken to avoid inhalation of spray mist or vapour, as well as contact between the wet paint and exposed skin or eyes
References
- Conversion Tables (information sheet 1410)
- Explanation to product data sheets (information sheet 1411)
- Safety Indicators (information sheet 1430)
- Safety in Confined Space and Health Safety, Explosion Hazard - Toxic Hazard (information sheet 1431)
- Relative humidity - Substrate Temperature - Air Temperature (information sheet 1650)
Product Details
PPG4190
Data sheet
- Manufacturer
- PPG
- For Use On
- Steel
- Application Method
- Brush, Roller, Spray
- Sheen
- Flat
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 20L
- Parts
- One
- Base Type
- Solvent-borne
- Solvent
- Alkyd
- Mixing Ratio
- -
- Suitable Substrates
- Steel
- Key Features
- UV resistant
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 1 hour
- Dry to Handle (at 20°C)
- -
- Dry to Recoat (at 20°C)
- 16 hours
- Fully Cured (at 20°C)
- -
- Pot Life (at 20°C)
- -
- Coverage
- 10.2 m²/l for 50 μm/6.8 m²/l for 75 μm
- Recommended Thinner/Cleaner
- Thinner 20-05
- Unit Contents
- Topcoat
- Compatible Primers
- Sigmarine 24
- Compatible Topcoats
- -
- Max. Application Temperature
- 50°C
- Min. Application Temperature
- 15°C
- Density
- 1.5 g/cm³
- Solids by Volume
- 51% ± 2%
- VOC
- Max. 254 g/kg (Directive 1999/13/EC, SED) max. 391 g/l (approx. 3.3 lb/gal) (UK PG 6/23(92) Appendix 3)
- Shelf Life (from date of manufacture)
- At least 12 months
- UN Number
- UN1263
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
PPG Sigmarine 35 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
PPG Thinner 91-92
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
£42.59 (incl. VAT)
£35.49 (ex. VAT)
In Stock and Available for Delivery