Jotun Penguard HB is a two component polyamide cured high molecular weight epoxy coating designed as a high build, all purpose coating for new construction. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments.
Jotun Jotamastic SF WG
Jotun Jotamastic SF WG is a 'Wintergrade' version of Jotun Jotamastic SF to aid application in lower temperatures and to provide faster drying and curing times. Jotun Jotamastic SF WG is a two component polyamine cured epoxy mastic coating that is a surface tolerant, solvent free, high build product. Well suited for early immersion.
Jotun Jotamastic SF WG is a 'Wintergrade' version of Jotun Jotamastic SF to aid application in lower temperatures and to provide faster drying and curing times. Jotun Jotamastic SF WG is a two component polyamine cured epoxy mastic coating that is a surface tolerant, solvent free, high build product. Well suited for early immersion and specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity and can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces.
Areas of Use
General: Primarily designed for maintenance and repair.
Marine: Outside hulls, exterior and interior areas, including water balast tanks. Suitable for water balast tanks at newbuilding stage.
Protective: Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Approvals and certificates
- Food, Compliant with USA, FDA Title 21, Part 175.300 for dry solids
- Grain, Newcastle Ocupational Health
- Approved for PSPC for Water Balast Tanks according to IMO Res. MSC 215(82)
Additional certificates and approvals may be available on request.
Features & Benefits
- Solvent free
- Excellent edge covering properties
- Good early water resistance
- Safe application in confined spaces
- Surface tolerant for maintenance and repair
- Can be applied in low temperatures
Solvent Free Jotamastic corrosion protection
Jotun Jotamastic SF WG is a solvent free alternative offering the same surface tolerant properties as other Jotamastic products. Other benefits are, excellent edge covering and resistance to early immersion.
Specially designed for areas where optimum surface preparation is not possible or desired, and therefor ideal for maintenance & repair.
Easy to use
Jotun Jotamastic SF WG offer good application properties with the use of standard application equipment
For use in a wide range of solutions
- Direct to metal
- As midcoat on zinc primers
- Immersed service
- Water ballast tanks
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- 4.6m² per litre
- Touch Dry
- 10 Hours
Be the first to ask a question about this product!
International Intergard 400 is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and improved overcoating properties after ageing.
Tor Matt Black is a general purpose matt finish for blackboards, interior wrought iron work, dark rooms, welding booths etc. See further below for preparation for use on bare wood and previously-painted surfaces. Available in 3 sizes Good coverage - up to 12.5 square metres per litre Apply by brush, roller (short pile) or air spray An...
Get creative – enrich and gild interior and exterior surfaces with Blackfriar Metallic Paint. Ideal for ornamental plasterwork, picture frames, decorations, theatre props, furniture, radiators and textured wall finishes.
International Intergard 1735 is a high performance, low VOC, water borne two component epoxy with a high gloss finish. International Intergard 1735 is a tough, hard wearing chemically resistant epoxy finish suitable for most circumstances where the odour or emissions from solvent based coatings are unacceptable.
Cromadex 835 Two Pack Non-Isocyanate Acrylic Leatherette Topcoat is a two pack non-isocyanate acrylic leatherette topcoat with excellent exterior durabilityvand chemical resistance. The product uses unique resin and pigment technology enable a wide variety ofvapplications and a durable finish, whilst the leatherette effect can help differentiate your finish.
Tor H.B. Gelled Bitumen, a high build bitumen protective gel for roofing, felt, guttering, pipes and tanks, etc. The coating can also be used on steel and galvanising - refer further below for surface preparation. A solution of Petroleum Bitumen in White Spirit containing inorganic pigments and suitably structured for application Touch dry...
A corrosion resistant epoxy mastic for steel, offering very good protection against fresh and salt water. Top Features Surface tolerant Fast curing at low temperatures Good coverage
An air-dried coating available in colours and suitable for high temperature exposures up to 525°F (273°C). Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Top Features Temperature resistance up to 273°C Air-dried curing capabilities Excellent resistance to thermal...
Nu-Steel TP Primer/Undercoat is a two-part epoxy-based coating for use on properly prepared steelwork, such as bridges, railings, and even metallic artwork. Advantages Excellent opacity. Available in white, grey and buff. 10m²/Litre coverage. 12-month shelf life.
Rust-Oleum 4200 Heat Resistant Primer (orange in colour) provides heat resistance up to 425°C dry heat on metal substrates, including application on boiler fronts, incinerators, stacks, breechings, kilns and similar surfaces subject to high temperatures and rust producing conditions. Also known as 4268 Heat Resistant Primer.
Cromadex Anti-Silicone Additive is designed to be added to selected Cromadex topcoats to aid paint application where silicone contamination may be present, helping to reduce coating rejection. The product can be used in Cromadex 222, 233, 400, 600 and 800 topcoats.
Jotun Hardtop XPL is a two component chemically curing aliphatic acrylic polyurethane coating that has a matt finish with very good gloss retention. A matt finish aliphatic acrylic polyurethane coating with very good gloss retention. Good application properties with low dry spray and should be used as a topcoat in atmospheric environments.
Cromadex 683 Two Pack Polyurethane Eggshell Primer Finish is a two pack eggshell primer finish; the high quality resin and curing agent help to produce excellent long term colour stability. The product contains zinc phosphate giving added corrosion resistance for greater durability. Cromadex 683 is available in a wide range of colours, including BS, RAL,...
PPG AquaWeld 100 (also known as Sigma AquaWeld 100) is a two-component, moisture-curing, waterborne low zinc (ethyl) silicate prefabrication primer that is suitable for automatic application on shot-blasted steel plates. Top Features Certified by Lloyds Register and SLV Low fume release during welding and cutting Provides regular, smooth...
Jotun Jotamastic 90 WG is a 'Wintergrade' version of Jotamastic 90 to aid application in lower temperatures and to provide faster drying and curing times. It is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. This product is tintable in a wide range of colours.