HMG Thinner 2691
HMG Thinner 2691 is a thinner for use in various applications.For use with compatible HMG systems.More Information Delivery Info
£13.21 (incl. VAT)
£11.01 (ex. VAT)
HMG Acrylic Stoving Enamel is a durable and easy to use fast curing stoving enamel that is designed to give optimum durability and excellent colour retention on exterior exposure. Stoving paints are for force-drying; for painting stoves, see our heat-resistant paints.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
HMG Acrylic Stoving Enamel is a durable and easy to use fast curing stoving enamel that is designed to give optimum durability and excellent colour retention on exterior exposure.
Technical Data | |
---|---|
Volume Solids: | 53.2% |
VOC Content: | 0.48Kg/L |
SG: | - |
Viscosity: | 300 mPas |
Density: | 0.989 g/cm³ |
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
Shelf Life: | 12 months from delivery date in original sealed containers. |
Flash Point: | 24°C |
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
HVLP: | 20 µm | 50 µm | |
Gravity Gun: | 20 µm | 50 µm |
Coverage: 20 square metres per litre at 20 microns dft (Theoretical)
Drying Times At 120°C | |
---|---|
Fully Cured: | 30 minutes |
Technical Data | |||||
---|---|---|---|---|---|
HVLP | Gravity Gun | ||||
Mixing Ratio: | Base: 1 | Base: 1 | |||
Thinner: Up to 30% | Thinner: Up to 30% | ||||
Thinner Options: | Thinner 2691 | Thinner 2691 | |||
Viscosity: | 30-40 seconds B4 cup | 30-50 seconds B4 Cup | |||
Number Of Coats (Guide Only): | 1 - 2 coats | 1 - 2 coats | |||
Flash Off: | 30 minutes | 30 minutes |
HMG Acrylic Stoving Enamel:
Information on basic physical and chemical properties | |
---|---|
Form: | Liquid |
Colour: | According to product specification. |
Odour: | Characteristic |
Odour Threshold: | Not determined |
pH-value: | Not determined |
Change in Condition | |
Melting point/freezing point: | Undetermined |
Initial boiling point and boiling range: | 100°C |
Flash Point: | 24°C |
Flammability (solid, gas): | Not applicable |
Ignition temperature: | 315°C |
Decomposition temperature: | Not determined. |
Auto-ignition temperature: | Product is not selfigniting |
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." |
Explosion limits: Lower: | 0.7 Vol % |
Explosion limits: Upper: | 7.5 Vol % |
Vapour pressure at 20°C: | 5 hPa |
Density at 20°C: | 0.989 g/cm³ |
Relative density: | Not determined |
Vapour density: | Not determined |
Evaporation rate: | Not determined |
Solubility in / Miscibility with water: | NOT MISCIBLE |
Partition coefficient: n-octanol/water: | Not determined |
Viscosity: Dynamic at 20°C: | 300 mPas |
Viscosity: Kinematic: | Not determined |
Solvent content: Organic solvents: | 35.6% |
Solids content: | 53.2% |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
HMG Acrylic Stoving Enamel is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Thinner 2691 is a thinner for use in various applications.For use with compatible HMG systems.More Information Delivery Info
£13.21 (incl. VAT)
£11.01 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)