HMG A1240 High Opacity White is a high quality brushing enamel that gives excellent obliteration of previous coatings without the loss of gloss level, adhesion or durability.
| Technical Data | |
|---|---|
| Volume Solids: | 70.9% |
| VOC Content: | 0.32kgs/ltr |
| SG: | - |
| Viscosity: | 430 mPas |
| Density: | 1.28 g/cm³ |
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
| Shelf Life: | 12 months from delivery date in original sealed containers. |
| Flash Point: | 31°C |
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Brush: | 35 µm | 100 µm | |
Coverage: 6 - 8 square metres per litre @ 55 microns dft.
| Drying Times At 20°C | |
|---|---|
| Touch Dry: | 3 hours |
| Dry To Recoat: | Minimum 16 hours @20°C |
| Fully Cured: | 24 hours |
| Technical Data | |||||
|---|---|---|---|---|---|
| Brush | |||||
| Mixing Ratio: | Ready for use | ||||
| - | |||||
| Thinner Options: | n/a | ||||
| - | |||||
| Viscosity: | - | ||||
| Number Of Coats (Guide Only): | 2 full coats | ||||
| Flash Off: | - | ||||
| Information on basic physical and chemical properties | |
|---|---|
| Form: | Liquid |
| Colour: | White |
| Odour: | Characteristic |
| Odour Threshold: | Not determined |
| pH-value: | Not determined |
| Change in Condition | |
| Melting point/freezing point: | Undetermined |
| Initial boiling point and boiling range: | 135°C |
| Flash Point: | 31°C |
| Flammability (solid, gas): | Not applicable |
| Ignition temperature: | 200°C |
| Decomposition temperature: | Not determined. |
| Auto-ignition temperature: | Product is not selfigniting |
| Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." |
| Explosion limits: Lower: | 0.6 Vol % |
| Explosion limits: Upper: | 7.0 Vol % |
| Vapour pressure at 20°C: | 1 hPa |
| Density at 20°C: | 1.28 g/cm³ |
| Relative density: | Not determined |
| Vapour density: | Not determined |
| Evaporation rate: | Not determined |
| Solubility in / Miscibility with water: | NOT MISCIBLE |
| Partition coefficient: n-octanol/water: | Not determined |
| Viscosity: Dynamic at 20°C: | 430 mPas |
| Viscosity: Kinematic: | Not determined |
| Solvent content: Organic solvents: | 3.0% |
| Solids content: | 70.9% |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
HMG A1240 High Opacity White is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)
