Teamac Metalastic Black Bituminous, is a high quality bituminous solution for marine, industrial and agricultural applications. It forms a waterproof, weatherproof, corrosion resistant coating for interior and exterior use.
Multi-surface
Gloss finish
Indoor or outdoor
Economical protection
High Quality Bituminous Solution
Weather and Waterproof
Corrosion Resistant
Easily withstand Oxidisation
Please Note: 25L size is subject to a MOQ of 4 units and is only available on Express: 3-5 Working Days Delivery (TCL DS) and Economy: 7-10 Working Days Nationwide Delivery carrier options
Teamac Metalastic Black Bituminous, is a high quality bituminous solution for marine, industrial and agricultural applications. It forms a waterproof, weatherproof, corrosion resistant coating for interior and exterior use. It is resistant to low levels of alkalis and acids and can withstand prolonged oxidisation.
The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.
Drying Times
Drying Times At 20°C/RH 50%
Touch Dry:
3 Hours
Dry To Handle:
12 Hours
Dry To Recoat:
12 Hours or overnight
Fully Cured:
N/A
Low temperature and high humidity will adversely affect application, drying and performance of any coating.
Surface Preparation
All surfaces should be clean, dry, sound and free from contaminants.
New wood should be sanded prior to coating to ensure an adequate "key" is produced.
Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
Preceeding Coat
None
Mixing
Mix well before use.
Application Conditions
As dictated by normal good painting practice.
In confined spaces, provide adequate ventilation during application and drying.
Application Methods
Method
Airless Spray
Conventional Spray
Brush
Roller
No
No
Yes
Yes
Thinner (Max vol): N/A
Nozzle Size: N/A
Nozzle Pressure: N/A
Cleaning Solvent: Clean Water
Remarks
Overcoating with conventional solvent based paints will result in black bleeding through.
Health & Safety
See safety data sheet - SDS 10645 in attachments section above.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Can you confirm this is potable. It has been recommended to me for the inside of a water tank on a narrowboat.
Answer from Rawlins’ Technical Team:
The product is not suitable for use in a drinking water tank.
Assumng the tank is of a suitable substrate, it is clean, dry, sound and prepared as detailed in the technical data sheet you could consider Resimac 507 DWPU.
The coating has been approved under the UK WRAS scheme BS6920-1:2014 for contact and immersion conditions in drinking water and is ideal for chlorination agents.
Patrick O'Grady on 2021-01-28 22:01:33
Question:
Hi can this product be used on a slated pitch roof ? What is the coverage ? One coat or two ? Thanks for your help Regards from Patrick
Answer from Rawlins’ Technical Team:
No this cannot be used on a slate roof.
Assuming you are looking to paint the slate roof for decorative purposes (not waterproofing) it is clean, dry, sound and prepared as detailed in the Technical Data sheet we can recommend Teamac Acrylic Coating.
This would have to be applied in the spring or summer.
Teamac Metalastic Black Bituminous is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.
Provides an economical way of making sure you will have what you need
Ideal for interior and exterior paint projects
Click to jump down to...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...