HMG Polykote 2K MU Primer

    PRIMU
    HMG4456

    HMG Polykote 2K MU Primer (Base) is a 2K isocyanate cured acrylic polyurethane primer/surfacer offering high film build, excellent adhesion and anti corrosive properties.

    This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener/thinner:

    3-Pack System Details
    Base (Part 1)HMG Polykote 2K TAP Primer
    Hardener (Part 2)HMG Hardener 9004 Standard
    Thinner (Part 3)HMG Thinner 2601
    HMG Thinner 2602
    HMG Thinner 2603
    HMG Thinner 2604

    • Part one of a three-pack system.
    • Can be overcoated "wet on wet" with all HMG 2K topcoats.
    • Excellent early sanding properties if required.

    Product customisation

    Don't forget to save your customization to be able to add to cart
    • 250 char. max
    Colour Group
    Size
    Finish
    £101.69(ex. VAT)
    £122.03 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    HMG Polykote 2K MU Primer is a 2K isocyanate cured acrylic polyurethane primer/surfacer offering high film build, excellent adhesion and anti corrosive properties.

    Please note this product is one part of a three-pack system which MUST be purchased/used together with HMG Hardener 9004 Standard. A thinner option must also be purchased from HMG Thinner 2601, HMG Thinner 2602, HMG Thinner 2603 or HMG Thinner 2604.



    Click To Jump To Section:




    Features & Benefits


    • Part one of a three-pack system.
    • Can be overcoated 'wet on wet' with all HMG 2K topcoats.
    • Excellent early sanding properties if required.



    Product Specification


    Technical Data
    Polykote 2K MU Primer WhitePolykote 2K MU Primer Light GreyPolykote 2K MU Primer Buff
    Volume Solids:69.3%69.2%69.2%
    VOC Content:0.453kgs/ltr0.453kgs/ltr0.453kgs/ltr
    SG:---
    Viscosity:650 mPas680 mPas660 mPas
    Density:1.487 g/cm³1.447 g/cm³1.486 g/cm³
    Storage Conditions:Store between 5°C - 25°C. When not in use, cans must be kept sealed.Store between 5°C - 25°C. When not in use, cans must be kept sealed.Store between 5°C - 25°C. When not in use, cans must be kept sealed.
    Shelf Life:12 months from delivery date in original sealed containers.12 months from delivery date in original sealed containers.12 months from delivery date in original sealed containers.
    Pot Life:1 - 2 hours1 - 2 hours1 - 2 hours
    Flash Point:24°C27°C24°C



    Film Thickness Range And Coverage


    Product Data
     Dry Film ThicknessWet Film Thickness
    Compliant Spray Gun:45 μm70 μm
    Airless/Air-Assisted:45 μm70 μm



    Coverage: 20 square metres per litre at 25 microns dft mixed

    • HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
    • These values are a guide only and are not to be used as specifications.
    • Film thickness will vary depending on actual use and specification.
    • Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.



    Drying Times


    Drying Times At 20°C
    Touch Dry:45 minutes
    Dry To Recoat:Minimum of 30 minutes at 20°C when used as a Wet on Wet. After 4 hours at 20°C product must be flatted.
    Fully Cured:4 hours at 20°C
    Fully Cured:30 minutes at 70°C



    Surface Preparation


    • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
    • Read and follow the safety data sheet, product data sheet and label instructions.
    • Stir all paints thoroughly before use.
    • Always use the same batch number on the same job.
    • Check colour & sheen.
    • Filter the product immediately before use.
    • Reduce emissions and maintain quality by replacing tin lid after use.



    Application Methods



    Technical Data
    Compliant Spray GunPressure PotAirless/Air-Assisted
    Mixing Ratio:Base: 4Base: 4Base: 1
    Hardener: 1Hardener: 1Hardener: 1
    Thinner: 1Thinner: 1Thinner: -
    Hardener Options:Hardener 9004 StandardHardener 9004 StandardHardener 9004 Standard
    Thinner Options:Thinner 2601Thinner 2601-
    Thinner 2602Thinner 2602-
    Thinner 2603Thinner 2603-
    Thinner 2604Thinner 2604-
    Viscosity:33 - 36 seconds B4 cup33 - 36 seconds B4 cup40 - 50 seconds B4 cup
    Spray Gun Setup:1.8 - 2.01.1 - 1.411 - 13 thou 40/50°
    Number Of Coats (Guide Only):1 - 2 coats1 - 2 coats1 - 2 coats
    Flash Off:10 - 15 minutes between coats10 - 15 minutes between coats10 - 15 minutes between coats



    For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]



    Product Notes


    Information On Basic Physical And Chemical Properties
    Polykote 2K MU Primer WhitePolykote 2K MU Primer Light GreyPolykote 2K MU Primer Buff
    Form:According to product specificationAccording to product specificationAccording to product specification
    Colour:According to product specificationAccording to product specificationAccording to product specification
    Odour:CharacteristicCharacteristicCharacteristic
    Odour Threshold:Not determinedNot determinedNot determined
    pH-value 20°C:Not determinedNot determinedNot determined
    Melting point/freezing point:UndeterminedUndeterminedUndetermined
    Initial boiling point and boiling range:100°C100°C126°C
    Flash Point:24°C27°C24°C
    Flammability (solid, gas):Not applicableNot applicableNot applicable
    Ignition temperature:315°C315°C315°C
    Decomposition temperature:Not determined.Not determined.Not determined.
    Auto-ignition temperature:Product is not selfigniting.Product is not selfigniting.Product is not selfigniting.
    Explosive properties:"Product is not explosive. However, formation of explosive air vapour mixtures are possible.""Product is not explosive. However, formation of explosive air vapour mixtures are possible.""Product is not explosive. However, formation of explosive air vapour mixtures are possible."
    Explosion limits: Lower:1.1 Vol%1.5 Vol%1.0 Vol%
    Explosion limits: Upper:10.8 Vol%10.8 Vol%10.8 Vol%
    Vapour pressure at 20°C:6.7 hPa3.4 hPa3.4 hPa
    Density at 20°C:1.487 g/cm³1.447 g/cm³1.486 g/cm³
    Relative density:Not determinedNot determinedNot determined
    Vapour density:Not determinedNot determinedNot determined
    Evaporation rate:Not determinedNot determinedNot determined
    Solubility in / Miscibility with water:NOT MISCIBLENOT MISCIBLENOT MISCIBLE
    Partition coefficient: n-octanol/water:Not determinedNot determinedNot determined
    Viscosity: Dynamic at 20°C:650 mPas680 mPas660 mPas
    Viscosity: Kinematic:Not determinedNot determinedNot determined
    Solvent content: Organic solvents:30.3%30.4%18.3%
    Solids content:69.3%69.2%69.2%



    Health & Safety


    • Refer to the safety data sheet in the attachments section above and tin label prior to use.

    Click to go back to the top of the page

    Product Details
    4456-1004420

    Data sheet

    Manufacturer
    HMG Paints Limited
    Water / Solvent Based
    Solvent
    For Use On
    Steel
    Application Method
    Spray, Pressure pot
    Sheen
    Matt
    Colour
    Standard / Ready Mixed
    Single, Two or Three Pack
    Three-Pack
    Pack Size
    5L
    Mixing Ratio
    Base: 1 - Hardener: 1 - Thinner: 1
    Key Features
    Can be overcoated 'wet on wet' with all HMG 2K Topcoats. Excellent early sanding properties if required.
    Touch Dry (at 20°C)
    45 minutes
    Dry to Recoat (at 20°C)
    Minimum of 30 minutes at 20°C when used as a Wet on Wet. After 4 hours at 20°C product must be flatted.
    Fully Cured (at 20°C)
    4 hours
    Pot Life (at 20°C)
    1 - 2 hours
    Coverage
    20 square metres per litre @ 25 microns dft mixed
    Recommended Thinner/Cleaner
    Thinner 2601/2602/2603/2604
    Density
    Polykote 2K MU Primer White: 1.487 g/cm³ - Polykote 2K MU Primer Light Grey: 1.447 g/cm³ - Polykote 2K MU Primer Buff: 1.486 g/cm³
    Solids by Volume
    Polykote 2K MU Primer White: 69.3% - Polykote 2K MU Primer Light Grey: 69.2% - Polykote 2K MU Primer Buff: 69.2%
    VOC
    0.453kgs/ltr
    Shelf Life (from date of manufacture)
    12 months from delivery date in original sealed containers.
    Recommended Dry Film Thickness
    45 μm
    Recommended Wet Film Thickness
    70 μm
    UN Number
    UN1263
    Fully Cured
    30 minutes at 70°C
    Base Type
    Solvent-Based
    Suitable For Use On
    Steel
    Finish
    Matt
    Application Method
    Spray
    Product Usage Type
    Primer
    Product Range
    Polykote
    Colour Family
    Off-White
    Colour Family
    Grey
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    HMG Polykote 2K MU Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    HMG Thinner 2601

    HMG Thinner 2601 is a very fast thinner.For use in recommended HMG systems.More Information Delivery Info

    Price £10.25 (ex. VAT)
    In Stock and Available for Delivery

    HMG Thinner 2602

    HMG Thinner 2602 is a medium slow thinner.For use with compatible HMG systems.More Information Delivery Info

    Price £10.65 (ex. VAT)
    In Stock and Available for Delivery

    HMG Thinner 2603

    HMG Thinner 2603 is a medium slow thinner.For use with compatible HMG systems.More Information Delivery Info

    Price £36.01 (ex. VAT)
    In Stock and Available for Delivery

    HMG Thinner 2604

    HMG Thinner 2604 is a slow thinner.For use with compatible HMG systems.More Information Delivery Info

    Price £10.65 (ex. VAT)
    In Stock and Available for Delivery

    HMG Hardener 9004 Standard

    HMG Hardener 9004 Standard is a medium solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:2-Pack System DetailsBase (Part 1) HMG Acrythane SC601 ColoursHMG Acrythane 102HMG 2K Multi Surface TopcoatHMG Polykote 2K AMC Primer...

    Price £24.71 (ex. VAT)
    In Stock and Available for Delivery

    Surface Preparation Kits for Steel

    These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...

    Price £21.53 (ex. VAT)
    In Stock and Available for Delivery