Tikkurila Temalac FD 80 is a fast-drying, one-component glossy alkyd topcoat. It is an ideal solution for workshops with fast production cycles and for on-site-painting.
Used as a topcoat in alkyd systems. The paint is an ideal solution for workshops with fast production cycles and for on-site-painting.
Provides an almost unlimited range of colours, including metallic effects.
Good gloss and colour retention when exposed to rural conditions.
Suitable also for electrostatic painting.
Recommended for steel structures, service platforms and different types of machinery and equipment.
Product customisation
Don't forget to save your customization to be able to add to cart
Tikkurila Temalac FD 80 is a fast-drying, one-component glossy alkyd topcoat.
Temalac FD 80 is used as a topcoat in alkyd systems. The paint is an ideal solution for workshops with fast production cycles and for on-site-painting. Temalac FD 80 provides an almost unlimited range of colors, including metallic effects.
Temalac FD 80 has good gloss and colour retention when exposed to rural conditions. The paint is used for steel framework, service platforms and different types of machinery and equipment.
It has been used in hundreds of projects during the past years, thus proving the reliability of the product.
Used as a topcoat in alkyd systems. The paint is an ideal solution for workshops with fast production cycles and for on-site-painting.
Provides an almost unlimited range of colors, including metallic effects.
Good gloss and colour retention when exposed to rural conditions.
Has been used in hundreds of projects during the past years, thus proving the reliability of the product.
Suitable also for electrostatic painting.
Recommended for steel structures, service platforms and different types of machinery and equipment.
Technical Data
Technical Data
Tikkurila Temalac FD 80
Volume Solids:
45±2%
SG:
1.1 to 1.2 g/cm³
Viscosity:
Kinematic (40°C): >20.5 mm² /s >60 s [ISO 6mm cup]
Density:
1.2 g/cm³
Storage Conditions:
Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials. Keep container tightly closed. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Recommended storage temperature is +5°C ...+25°C
Flash Point:
25°C (xylene)
Drying Times
DFT 40µm
10°C
23°C
35°C
Dust Dry:
40 minutes
15 minutes
10 minutes
Touch Dry:
5 hours
1.5 hours
1 hour
Recoatable:
12 days
6 days
4 days
Recoatable (wet on wet):
1 - 4 hours
30 minutes - 2 hours
30 minutes
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Recommended Film Thickess
Wet
Dry
Theoretical Coverage
90µm
40µm
11.1 m²/l
135µm
60µm
7.4 m²/l
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Surface Preparation
Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Application Conditions
All surfaces must be clean, dry and free from contamination.
The temperature of the ambient air, surface and paint should not fall below +10ºC during application and drying.
Relative humidity of the air should not exceed 80% during application and drying.
The surface temperature of steel should remain at least 3°C above the dew point.
Good ventilation and sufficient air movement is required in confined areas during application and drying.
Application
Stir the product carefully before use.
For airless spraying, the product is thinned approximately 5–15%. Recommended nozzle tip is 0.011"–0.015" and pressure 120–180 bar. Spray angle shall be chosen according to the shape of the object.
For conventional spraying, the product is thinned approximately 20–30% to the viscosity 20–25s (DIN4). Recommended nozzle tip is 1.4–1.8 mm and pressure 3–4 bar.
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tikkurila Temalac FD 80 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Tikkurila Temaprime EE is a fast drying, one-component anti-corrosive special primer. Its recommended uses include both new and maintenance painting of containers, agricultural machinery and other steel structures.Huge colour range available. Adheres extremely well to different kinds of substrates, such as steel, aluminium and zinc....
Tikkurila Temaprime EUR is a fast-drying, one-component anti-corrosive economical alkyd primer. Recommended for steel structures, agricultural, construction and other machinery.Huge colour range available. An excellent choice for use in assembling plants and painting stations with rapid production cycles. The product has MED (Marine...
Tikkurila Temaprime GF is a fast-drying one-component anti-corrosive pigmented special primer. Recommended uses include haulage equipment, agricultural, construction and other machinery.Huge colour range available Primer for steel, aluminium and zinc surfaces Recoatable also with polyurethane paints Excellent anti-corrosive properties...
Tikkurila Thinner 1053 is a slow thinner for alkyd paints, chlorinated rubber paints and 1-component acrylic paints. For use with recommended Tikkurila products.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...