HMG 14 Line Fleet Polyurethane is a high build, high solids polyurethane based on a unique blend of polyurethane alkyds. It combines a long wet edge time with excellent hot spray application offering superb durability and gloss retention.
Can be brushed directly from the can or with the addition of a small amount of thinner
Suitable for use on concrete flooring
Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
For the 400ml (16oz) aerosol version please seeHMG 14 Line Fleet Polyurethane AerosolPlease Note: HMG Fleet and Automotive colours are available on request, please contact our Technical Department on 0113 2455450 (option 2) or email [email protected] for more information
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cart
HMG 14 Line Fleet Polyurethane is a high build, high solids polyurethane based on a unique blend of polyurethane alkyds. It combines a long wet edge time with excellent hot spray application offering superb durability and gloss retention.
Information on basic physical and chemical properties
Form:
Liquid
Colour:
According to product specification
Odour:
Characteristic
Odour Threshold:
Not determined
pH-value:
Not determined
Change in Condition
Melting point/freezing point:
Undetermined
Initial boiling point and boiling range:
135°C
Flash Point:
>30°C
Flammability (solid, gas):
Not applicable
Ignition temperature:
>200°C
Decomposition temperature:
Not determined.
Auto-ignition temperature:
Product is not self-igniting
Explosive properties:
"Product is not explosive. However, formation of explosive air vapour mixtures are possible."
Explosion limits: Lower:
0.6 Vol %
Explosion limits: Upper:
7 Vol %
Vapour pressure at 20°C:
Not determined
Density at 20°C:
1.092 g/cm³
Relative density:
Not determined
Vapour density:
Not determined
Evaporation rate:
Not determined
Solubility in / Miscibility with water:
NOT MISCIBLE
Partition coefficient:n-octanol/water:
Not determined
Viscosity: Dynamic at 20°C:
200 mPas
Viscosity: Kinematic:
Not determined
Solvent content: Organic solvents:
41.9%
Solids content:
57.6%
Health & Safety
Refer to the safety data sheet in the attachments section above and tin label prior to use.
Suitable respiratory equipment should be worn when spraying.
Contaminated rags, spray booth filters or other substrates should be segregated from other chemical waste, soaked with water and disposed of in a non-combustible container with a tight fitting lid.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hi ISHMAEL 14Line Fleet Polyurethane suitable to paint a motorhome many thank's Len
Answer from Rawlins’ Technical Team:
Thank you for the enquiry, please can you provide more information regarding the substrate and pictures of the roof to [email protected] then we can assist with a recommendation.
HMG 14 Line Fleet Polyurethane is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
HMG Synthetic BDX Primer is a high build, anti-corrosive, single pack alkyd primer for use under all HMG synthetic topcoats, combining high build and excellent sandability with outstanding application and scratch filling properties.For use on suitably prepared structural steel, chassis, fabrication and aluminium Can be applied to bare...
HMG Speedbuild 3 Primer is a 1K, high build, high solids, anti-corrosive primer. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener/thinner:2-Pack System DetailsBase (Part 1) HMG Speedbuild 3 PrimerThinner (Part 2) HMG Thinner 2601HMG Thinner 2602HMG...
HMG Synthetic High Opacity Undercoat is a 1K alkyd/polyurethane undercoat with superior brushing qualities and excellent obliteration properties.Suitable for large areas due to its ease of application and long wet edge time Please note: Colours shown are for illustrative purposes onlyMore Information Delivery Info
HMG Hardener 9029 ZIP is an isocyanate hardener.Designed for use in recommended HMG Alkyd and Polyurethane Alkyd systems. Upgrades the performance characterstics of the system, including durability and time to touch dry may decrease by 10 - 20% dependant on paint system, film thickness and curing conditions.More Information Delivery...
HMG 14 Line Fleet Polyurethane Aerosol is a high build, high solids Polyurethane Aerosol based on a unique blend of Polyurethane Alkyds, offering excellent durability and gloss retention. This product has also been designed to be “Ready for Use”, for the non-aerosol version of this product please see HMG 14 Line Fleet Polyurethane....
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...