HMG Thinner 2600
HMG Thinner 2600 is a very fast thinner.For use in recommended HMG systems.More Information Delivery Info
£47.71 (incl. VAT)
£39.76 (ex. VAT)
HMG Polyester Spray Filler KF8 is a 2K heavy bodied sprayable filler which can be used for the deep filling of substrates of various types.
HMG Polyester Spray Filler KF8 is a 2K heavy bodied sprayable filler which can be used for the deep filling of substrates of various types.
Technical Data | ||||||
---|---|---|---|---|---|---|
HMG Polyester Spray Filler KF8 | ||||||
Volume Solids: | 70.0% | |||||
VOC Content: | 0.380kgs/ltr | |||||
SG: | - | |||||
Viscosity: | 500 mPas | |||||
Density: | 1.52 g/cm³ | |||||
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||||
Shelf Life: | 12 months from delivery date in original sealed containers. | |||||
Pot Life: | 20 minutes | |||||
Flash Point: | 31°C |
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Compliant Spray Gun: | 100 μm | - | |
Airless/Air-Assisted: | 100 μm | - |
Coverage: n/a
Drying Times At 20°C | |
---|---|
Touch Dry: | 20 minutes at 20°C |
Touch Dry: | 5 minutes at 60°C |
Dry To Recoat: | Can be used as a wet on wet system. |
Fully Cured: | 2 hours at 20°C |
Fully Cured: | 20 minutes at 60°C |
Technical Data | |||||
---|---|---|---|---|---|
Compliant Spray Gun | Brush | HVLP | |||
Mixing Ratio: | Base: 10 | Base: 10 | Base: 10 | ||
Hardener: 1 | Hardener: 1 | Hardener: 1 | |||
Thinner: up to 25% | Thinner: - | Thinner: up to 25% | |||
Hardener Options: | KF8 Hardener | KF8 Hardener | KF8 Hardener | ||
Thinner Options: | Thinner 2600 | Thinner 2600 | Thinner 2600 | ||
Viscosity: | - | - | - | ||
Spray Gun Setup: | Dependant on application | - | Dependant on application | ||
Number Of Coats (Guide Only): | 1 heavy coat | 1 heavy coat | 1 heavy coat | ||
Flash Off: | - | - | - |
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
HMG Polyester Spray Filler KF8 | ||||||
Form: | According to product specification | |||||
Colour: | According to product specification | |||||
Odour: | Characteristic | |||||
Odour Threshold: | Not determined | |||||
pH-value 20°C: | Not determined | |||||
Melting point/freezing point: | Undetermined | |||||
Initial boiling point and boiling range: | 145°C | |||||
Flash Point: | 31°C | |||||
Flammability (solid, gas): | Not applicable | |||||
Ignition temperature: | 480°C | |||||
Decomposition temperature: | Not determined. | |||||
Auto-ignition temperature: | Product is not selfigniting. | |||||
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||||
Explosion limits: Lower: | 1.2 Vol% | |||||
Explosion limits: Upper: | 8.9 Vol% | |||||
Vapour pressure at 20°C: | 6 hPa | |||||
Density at 20°C: | 1.52 g/cm³ | |||||
Relative density: | Not determined | |||||
Vapour density: | Not determined | |||||
Evaporation rate: | Not determined | |||||
Solubility in / Miscibility with water: | NOT MISCIBLE | |||||
Partition coefficient: n-octanol/water: | Not determined | |||||
Viscosity: Dynamic at 20°C: | 500 mPas | |||||
Viscosity: Kinematic: | Not determined | |||||
Solvent content: Organic solvents: | 30.1% | |||||
Solids content: | 70.0% |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
HMG Polyester Spray Filler KF8 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Thinner 2600 is a very fast thinner.For use in recommended HMG systems.More Information Delivery Info
£47.71 (incl. VAT)
£39.76 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)