- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Coronavirus Updates - Open and Services as Normal (click for more info)
Jotun Hardtop Flexi Alu
JOT1016
Jotun Hardtop Flexi Alu has a remarkable ability to resist impact and will maintain initial gloss level over extended periods. Low VOCs, application of single coats up to 110 microns and fast drying add to the features of Hardtop Flexi Alu. This is one of the few products that contain anti-corrosive pigments for the best direct to metal performance.
- Can be applied in thick coats
- Great adhesion to most primers and substrates
- Direct to metal application
- Contains anti-corrosive pigments
- Very good abrasion resistance
- Good chemical resistance
- Excellent flexibility
Description
Jotun Hardtop Flexi Alu is a two-pack polyurethane coating with semigloss and good colour retention which provides a high solid, flexible and light aluminium finish, suitable for protection of steel structure where a metallic finish effect is expected.
Jotun Hardtop Flexi Alu has a remarkable ability to resist impact and will maintain initial gloss level over extended periods. Low VOCs, application of single coats up to 110 microns and fast drying add to the features of Hardtop Flexi Alu. This is one of the few products that contain anti-corrosive pigments for the best direct to metal performance.
Product Information
- Can be applied in thick coats
- Great adhesion to most primers and substrates
- Direct to metal application
- Contains anti-corrosive pigments
- Very good abrasion resistance
- Good chemical resistance
- Excellent flexibility
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
JOT1016
Data sheet
- Manufacturer
- Jotun
- For Use On
- Metal, Steel, Stainless Steel, Galvanized Steel, Aluminium
- Application Method
- Brush, Spray
- Sheen
- Semi-Gloss
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 20L
- Application
- Brush, Spray
- Coverage
- 4.9 to 10.8m²/l
- Touch Dry
- 1.5 hours
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1866
Be the first to ask a question about this product!