Jotun Pilot ACR is recommended for refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures.
Jotun Pilot ACR is a one component physically drying acrylic coating that has a semi gloss finish with good gloss retention. It is a high build product that is fast drying and can be used direct to metal. To be used as topcoat in atmospheric environments and can be applied at sub zero surface temperatures.
Jotun Pilot ACR is recommended for refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures.
Approvals and certificates
Additional certificates and approvals may be available on request.
Features & Benefits
Reduces your application cost
Pilot ACR requires no mixing and has no pot life restrictions, which reduce time spent on preparation, waste, spillage and leftovers
Quick drying time enables you to use, move or store your painted object shortly after painting
Improves your productivity
Both quick drying and the possibility to save one coat, mean more output than what is obtainable with conventional, thin film acrylics or alkyds
Tested to perform well and cure fast even at minus 15˚C. In cold climates this means there is no limitation to the painting season, and you can reduce heating costs.
Reduces your maintenance cost
Time to first maintenance is increased as Pilot ACR offers very good gloss retention and can be used as a C3 system when overcoated by itself (acc. ISO 12944)
Direct-to-metal (DTM)
Can be used as a one-coat DTM product in atmospheric corrosivity category C2.
Can also be used as a two-coat DTM product in atmospheric corrosivity category C3 (acc. ISO 12944).
Primers
Pilot ACR will form a long lasting corrosion protection system together with primers like Penguard, Jotamastic or one-component acrylic primers for a wide range of purposes.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Renee van der Laan on 2023-09-06 14:28:48 | Question: I want to paint my nsrrowboat. The Hull is steel, so I can't see a problem there. However, the cabin is made from fibreglass, currently painted with an enamel paint. Would I be able to use Jotun ACR paint here? Thanks, Renee van der Laan |
Answer from Rawlins’ Technical Team: Yes assuming the previously painted fibreglass cabin is clean, dry, sound and prepared as detailed in the technical data sheet this could be used. We would recommend to test on a small area for compatibility and adhesion prior to full application. However, applying this product would then result in having to recoat with Jotun Pilot ACR or a similar acrylic topcoat in future, as you'd be unable to revert back to an alkyd enamel. If you are also looking to paint the hull assuming it is bare, prepared steel Jotun Jotamastic 90 can be used followed by Jotun Hardtop XP. This would be suitable for above and below the waterline. This is available mixed to many RAL, BS or NCS colours in a gloss finish. | |
| Elizabeth Cole on 2021-06-24 10:32:57 | Question: Hi Please could you tell me if this product would be ok to use on old cast iron? Thanks |
Answer from Rawlins’ Technical Team: Assuming the cast iron is clean, dry, sound and prepared as detailed in the technical data sheet this can be used. We would recommend blasting to SA2.5 prior to application. | |
| constantin on 2016-08-31 20:23:00 | Question: . Can i use this paint to paint wood ? curently i'm in the process of building an outdoor bbq area which will be covered and i want to paint the timber inside . i initially want to purchase this paint to paint a metal shed and with the rest of it to bbq area . any info will be appreciated . best regards ! |
Answer from Rawlins’ Technical Team: Jotun Pilot ACR would not be suitable for the application you have described, instead we would suggest using Rust-Oleum CombiColor Multi-Surface. | |
Jotun Pilot ACR is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
