Jotun Jotamastic 87 GF WG
Jotun Jotamastic 87 GF WG is a Wintergrade version of Jotamastic 87 GF to aid application at lower temperatures and provide faster curing times. Jotun Jotamastic 87 GF WG is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids, high build product. Reinforced with glass flakes for improved abrasion and scratch resistance.
Jotun Jotamastic 87 GF WG is a Wintergrade version of Jotamastic 87 GF to aid application at lower temperatures and provide faster curing times. Jotun Jotamastic 87 GF WG is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids, high build product. Reinforced with glass flakes for improved abrasion and scratch resistance. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub zero surface temperatures.
Jotun Jotamastic 87 GF WG is primarily designed for maintenance and repair. Specially suitable for surfaces exposed to considerable wear and tear such as high traffic areas.
Approvals and certificates
- Low flame spread clas 1, BS 476, Part 7, 1971. Warinton Fire reasearch, Naval Eng, Stand 713: Isue 3
- Grain, Newcastle Ocupational Health
Additional certificates and approvals may be available on request.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||2.8m² per litre|
|Touch Dry||3.5 hours|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close