A water based, low VOC, single component, elastomeric coating that provides rust-proofing, corrosion and waterproofing protection optimized for brush or roller application. It forms an anti corrosive membrane that has a high resistance to water, salt spray, acid and aggressive environments making it virtually unaffected over time.
Jotun Jotamastic Plus
Jotun Jotamastic Plus is a two component amine cured epoxy mastic coating that is surface tolerant, high solids and high build. It is specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity and can be used as a primer, mid coat, finish coat or as a single coat system.
Jotun Jotamastic Plus is a two component amine cured epoxy mastic coating that is surface tolerant, high solids and high build. It is specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity and can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces.
Areas of Use
General: Primarily designed for maintenance and repair.
Marine: Outside hulls, exterior and interior areas.
Protective: Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
- Typical Coverage (per coat)
- 4.8m² per litre
- Touch Dry
- 4 hours
- Brush, Roller, Spray
Be the first to ask a question about this product!
Jotun Penguard Pro is a two component amine cured epoxy coating that is a surface tolerant, fast drying, high solids, high build product specially designed as a universal, all round, all year, new construction coating. This Jotun Paints product can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed...
Coo-Var Hammercote Smooth Finish is a fast drying coating giving a smooth gloss finish to metallic objects. ADVANTAGES Durable Full hardness reached after several days Interior/Exterior use Heat resistant up to 150°C Very fast drying Rust resistant Apply direct to metal or primer
Teamac Farm Oxide Paint is an economical, general purpose, versatile product giving economical protection and decoration which can be used for the maintenance of structural steel, cladding etc. when applied to properly prepared surfaces. May be used coat on coat and dries to a durable gloss finish. Can be applied directly to prepared iron or steel.
Nu-Steel SP Etch Primer is a single pack primer giving excellent adhesion to aluminium and other metal prior to subsequent paint systems. Advantages Available in Grey and Red Oxide. Excellent adhesion to metals. 12m²/Litre typical coverage. 12-month shelf life.
A high performance direct-to-metal silicone/polyurethane alkyd finish. Perfect for the protection and decoration of ferrous metals in many home projects such as fencing, gates and other ironmongery. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004 Advantages Outstanding application properties Excellent exterior...
A rust preventing coating that is the solvent-based version of Rust-Oleum Mathys Noxyde that can be applied by brush, roller or spray in cold temperatures down to 0°C or on damp surfaces by brush, roller or spray.
International Intertuf 16 is a one component, high build cold applied bituminous coating for use as an economical coating ideally suited for the protection of interior steel surfaces in enclosed areas such as tanks for storage of sea water, immersed piping and structural steelwork.
Jotun Jotamastic 87 Alu provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub zero surface temperatures.
Jotun Conseal Touch-Up Alu is a one component physically drying acrylic coating with a matt finish. It is an aluminium finish version of Jotun Conseal Touch-Up and is also a high build product that is fast drying and can be used direct to metal. To be used as primer/topcoat in atmospheric environments, it can be applied at sub zero surface temperatures.
Jotun Hardtop Flexi is a high solids (64% volume) polyurethane topcoat with excellent wetting and adhesion properties. Hardtop Flexi has a remarkable ability to resist impact and will maintain initial gloss level over extended periods. This is one of the few products that contain anti-corrosive pigments for the best direct to metal performance.
Jotun Jotamastic 90 White B16 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. It has been specifically developed to meet the requirements of UK Highway Agency Item 116 for use on bridges and highway infrastructure.
Sikalastic 844 XT is a two part, elastic, very fast curing modified polyurea spray applied membrane where exposure to high acidic and alkaline chemical concentrations are present, therefore also suitable for the use in closed structures containing biogenic sulphuric acid. Sikalastic 844 XT can only be spray applied with special two part hot spray equipment.
Jotun Jotamastic Smart Pack HB is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product designed for application with brush and roller. 1:1 mixing ratio for easy use and reduced wastage. Specially designed for areas where optimum surface preparation is not possible, provides long lasting protection in...
Jotun Penguard Express CF is a two component polyamide cured, colour stable epoxy primer/finish coating that is fast drying, high solids and high build. It can be used as primer, mid coat or finish coat in atmospheric environments and is specially designed for new construction where fast dry to handle and over coating times are required.