Jotun Jotamastic SF
Manufacturer: Jotun
Jotun Jotamastic SF is a two component polyamine cured epoxy mastic coating that is a surface tolerant, solvent free, high build product. Well suited for early immersion and specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity.
Product Description
Jotun Jotamastic SF is a two component polyamine cured epoxy mastic coating that is a surface tolerant, solvent free, high build product. Well suited for early immersion and specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity and can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces.
Areas of Use
General: Primarily designed for maintenance and repair.
Marine: Outside hulls, exterior and interior areas, including water balast tanks. Suitable for water balast tanks at newbuilding stage.
Protective: Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Approvals and certificates
- Food, Compliant with USA, FDA Title 21, Part 175.300 for dry solids
- Grain, Newcastle Ocupational Health
- Approved for PSPC for Water Balast Tanks acording to IMO Res. MSC 215(82)
Additional certificates and approvals may be available on request.
Features & Benefits
- Solvent free
- Excellent edge covering properties
- Good early water resistance
- Safe application in confined spaces
- Surface tolerant for maintenance and repair
Solvent Free Jotamastic corrosion protection
Jotun Jotamastic SF is a solvent free alternative offering the same surface tolerant properties as other Jotamastic products. Other benefits are, excellent edge covering and resistance to early immersion.
Surface Tolerant
Specially designed for areas where optimum surface preparation is not possible or desired, and therefor ideal for maintenance & repair.
Easy to use
Jotun Jotamastic SF offer good application properties with the use of standard application equipment
Solutions
For use in a wide range of solutions
- Direct to metal
- As midcoat on zinc primers
- Immersed service
- Water ballast tanks
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Technical Data
| Typical Coverage (per coat) | 5m² per litre |
| Touch Dry | 10 hours |
| Application | Brush, Roller, Spray |
| The figures stated above are approximate. Please ensure you refer to all datasheets for full application information. | |
Download
Questions
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.
Close