Jotun Jotamastic 87
  • Jotun Jotamastic 87

Jotun Jotamastic 87

Jotun Jotamastic 87 is a two component epoxy mastic coating for repair and maintenance. The product is surface tolerant, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity.

Colour
  • Current colour: Black
Choose a colour
Close colour picker
  • Black
  • Off White
  • BS110 - Roundel Blue
  • Grey 38
  • Red 49
  • Yellow 002
  • Green 137
Size
Finish
£46.85
VAT excluded

£56.22 Tax incl.
Quantity

Description

Jotun Jotamastic 87 is a two component epoxy mastic coating for repair and maintenance. The product is surface tolerant, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity.

Jotun Jotamastic 87 can be used as primer, mid coat and finish coat or as single coat system in atmospheric and immersed environments. It can be applied at sub zero surface temperatures.

Area of use:

Marine: Outside hull, exterior and interior areas, including water ballast tanks, approved for PSPC for water ballast tanks according to IMO Res. MSC 82/W.

Protective: Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel

Substrate: Carbon steel, galvanized steel, stainless steel, aluminum, concrete and a range of aged coating surfaces

Features & Benefits

  • Surface tolerant for maintenance and repair
  • More than 25 years track record
  • For severe environments requiring long lifetime expectancy

Well proven

Jotamastic 87 revolutionised the maintenance business when introduced more than 25 years ago, with an unprecedented track record.

Durable solution in harsh environments

Designed to provide long lasting protection in severe environments

Surface Tolerant

Specially designed for areas where optimum surface preparation is not possible or desired, and therefor ideal for maintenance and repair.

Variants

Jotamastic 87 offers a range of variants for special usage situations where further enhancement of key features is needed.

Aluminium: for extra barrier effect in extreme environments and Improved resistance to cathodic disbonding if direct to steel contact.

Glass flake: for increased abrasion resistance

MIO: micaceous iron oxide for increased barrier effect and abrasion resistance

For use in a wide range of solutions

  • Direct to metal 
  • As midcoat on zinc primers
  • Immersed service

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Typical Coverage (per coat)
4.1m² per litre
Touch Dry
7 hours
Application
Brush, Roller, Spray
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Jotun Conseal Touch-Up Alu

Jotun Conseal Touch-Up Alu is a one component physically drying acrylic coating with a matt finish. It is an aluminium finish version of Jotun Conseal Touch-Up and is also a high build product that is fast drying and can be used direct to metal. To be used as primer/topcoat in atmospheric environments, it can be applied at sub zero surface...

Price £32.29
In stock

Carboline Plasite 7122 VAR

A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VAR, is an abrasion resistant tank lining and industrial maintenance coating. Top Features • Excellent overall chemical resistance to a wide range of solvents• Superior...

In stock

Carboline Carboguard 893 SG

A metal primer with surface tolerant properties, can also be used as an intermediate coat, or self-priming finish over steel and zinc primers.  Top Features Ready to apply after mixing Economical fit for use epoxy Used as a primer, intermediate, or finish coat VOC compliant to current AIM regulations

Price £68.63
In stock

Carboline Carboguard 60

A high solids and abrasion resistant coating which can be used as a primer, intermediate coat, or self-priming finish over steel or inorganic zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. Top Features Low odor and low VOC Good chemical resistance Used as a primer, intermediate, or finish...

Price £250.50
In stock

Jotun Marathon

This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend Jotun Marathon 500 as a great alternative. Jotun Marathon is a two component polyamine cured epoxy coating that is a high solids, high build, glass flake reinforced product. It is scratch and abrasion resistant and is suitable for...

Price £233.06
In stock

Carboline Carbomastic 615 AL

An aluminium-filled epoxy for steel and concrete that has excellent resistance to water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Top Features Aluminium flakes provide exceptional barrier...

Price £249.75
In stock

Jotun Jotamastic 90 White B16

Jotun Jotamastic 90 White B16 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. It has been specifically developed to meet the requirements of UK Highway Agency Item 116 for use on bridges and highway infrastructure.

Price £229.20
In stock

Jotun Penguard Universal

Jotun Penguard Universal is a two component polyamine cured pure epoxy coating that is a fast drying, all year round, high solids, high build product. Jotun Penguard Universal provides excellent corrosion protection as part of a complete coating system and can be used as primer, mid coat, finish coat or as a single coat system in atmospheric and immersed...

Price £119.69
In stock

PPG PhenGuard 965

PPG PhenGuard 965, a 2-component high build epoxy coating that can be applied directly to metal, and cured, at temperatures as low as to 5°C (41°F).

Price £548.40
In stock

Jotun Jotamastic SF

Jotun Jotamastic SF is a two component polyamine cured epoxy mastic coating that is a surface tolerant, solvent free, high build product. Well suited for early immersion and specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity.

Price £155.70
In stock

Carboline Carboguard 1209

This versatile coating provides an impenetrable film for severe exposures in marine, offshore, petrochemical, pulp and paper and other aggressive environments. Top Features Excellent abrasion resistance Excellent chemical resistance Outstanding impermeability Single coat, self-priming capabilities

Price £182.16
In stock

Jotun Hardtop Flexi

Jotun Hardtop Flexi is a high solids (64% volume) polyurethane topcoat with excellent wetting and adhesion properties. Hardtop Flexi has a remarkable ability to resist impact and will maintain initial gloss level over extended periods. This is one of the few products that contain anti-corrosive pigments for the best direct to metal...

Price £59.49
In stock

Jotun Conseal Touch-Up

Jotun Conseal Touch-Up is a one component physically drying acrylic coating with a matt finish. Manufactured by Jotun, this is a high build product that is fast drying and can be used direct to metal. Ideal as a primer/topcoat in atmospheric environments, it can be applied at sub zero surface temperatures.

Price £35.10
In stock

Coo-Var Hammercote Smooth Finish

Coo-Var Hammercote Smooth Finish is a fast drying coating giving a smooth gloss finish to metallic objects. ADVANTAGES Durable Full hardness reached after several days Interior/Exterior use Heat resistant up to 150°C Very fast drying Rust resistant Apply direct to metal or primer

Price £17.70
In stock

Carboline Carboguard 690

A high performance, surface tolerant epoxy for metal and concrete that has excellent resistance to water and wastewater exposures. Top Features High solids, low VOC High build (16 mils) Low temperature cure (20°F) Fast cure response

Price £238.50
In stock

Carboline CARBO-KIT Carbomastic 18 FC

A heavy duty, high build coating for protection of steel in corrosive environments. It is specially designed for application with brush and roller. Top Features Excellent immersion performance in both fresh and sea water Suitable as a rust preventing coating in ballast tanks Very good abrasion resistance

Price £57.83
In stock