Jotun Jotamastic Smart Pack
  • Jotun Jotamastic Smart Pack

Jotun Jotamastic Smart Pack

Jotun Jotamastic Smart Pack is a two component amine cured epoxy mastic coating that is a surface tolerant, high solids, high build product. Specially designed for application with brush and roller with a 1:1 mixing ratio for easy use and reduced wastage. Specially designed for areas where optimum surface preparation is not possible or desired.

Colour
  • Current colour: Aluminium
Choose a colour
Close colour picker
  • Black
  • Aluminium
  • Red
  • Grey
  • Green
  • Buff
Size
Finish
£84.06
VAT excluded

£100.87 Tax incl.
Quantity

Description

Jotun Jotamastic Smart Pack is a two component amine cured epoxy mastic coating that is a surface tolerant, high solids, high build product. Specially designed for application with brush and roller with a 1:1 mixing ratio for easy use and reduced wastage. Specially designed for areas where optimum surface preparation is not possible or desired.

Jotun Jotamastic Smart Pack provides long lasting protection in environments with high corrosivity and can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces.

Areas of Use

General: Primarily designed for smaler maintenance and repair jobs.

Marine: Outside hulls, exterior and interior areas, including water balast tanks.

Protective: Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

Approvals and certificates

  • Grain, Newcastle Ocupational Health

Additional certificates and approvals may be available on request.

Features & Benefits

  • Designed for brush and roller application
  • 1:1 mixing ratio
  • Save time and money
  • Surface tolerant for maintenance and repair

Surface Tolerant

Specially designed for areas where optimum surface preparation is not possible or desired, and therefor ideal for maintenance and repair.

Designed for brush and roller application

The superior flow characteristics ensure a consistent protective paint film with correct thickness.

1:1 mixing

  • Mix only the amount needed, reducing waste and cost.
  • Smart Pack comes in two 5 litre tins with the lids clearly identified Component A (red lid) and Component B (blue lid). it can be simply mixed equal amounts in the quantity needed.

Saving time and money

Since the introduction in 2007, a large scale analysis has been carried out, monitoring the effect of introducing Jotamastic Smart Pack. The analysis shows that clients have reduced their paint consumption by up to 50%.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Typical Coverage (per coat)
9.3m² per litre
Touch Dry
4 hours
Application
Brush, Roller, Spray
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Carboline Carbothane 133 HG

A high build, glossy finish that has outstanding weathering resistance and colour retention. Suitable for application over a number of Carboline primers and intermediates. Top Features Outstanding performance propertie Suitable for application direct to inorganic zincs Application by spray, brush or roller

Price £276.00
In stock

Carboline Carbomastic 25

Carbomastic 25 gives a smooth and hard surface. The coating is very solid and provides excellent protections against corrosion. Top Features Excellent immersion performance in water. Suitable as a rust preventing coating in ballast tanks. Ideal for areas prone to condensation.

Price £238.50
In stock

Coo-Var Hammercote Smooth Aerosol

Coo-Var Hammercote Smooth Aerosol is a fast drying coating which gives a hard, durable, smooth finish direct to metal objects in a handy 400ml aerosol. ADVANTAGES Very fast drying Full hardness after several days Apply direct to metal or primer Durable Gloss finish Rust resistant Heat resistant up to 150°C Interior/Exterior use

Price £7.37
In stock

Jotun Hardtop Flexi Alu

Jotun Hardtop Flexi Alu has a remarkable ability to resist impact and will maintain initial gloss level over extended periods. Low VOCs, application of single coats up to 110 microns and fast drying add to the features of Hardtop Flexi Alu. This is one of the few products that contain anti-corrosive pigments for the best direct to metal performance.

Price £237.98
In stock

Sika Poxitar F

Sika Poxitar F is an epoxy-anthracene oil-combination heavy duty coating for steel and concrete. Sika Poxitar F is tough hard, heavy duty, abrasion and impact resistant and has excellent resistance to water and chemicals.

Price £225.23
In stock

Carboline Phenoline 1205

A glass flake-filled coating with dense cross-linking that exhibits excellent overall chemical resistance to a variety of aggressive chemicals. Glass reinforcement provides added abrasion resistance, permeation resistance and internal reinforcement. Top Features Excellent resistance to acids, caustics and solvents. Excellent abrasion...

Price £191.25
In stock

Hydron Nu-Steel SP Anti-Corrosive Primer/Undercoat

Nu-Steel SP Anti Corrosive Primer/Undercoat is a high performance phosphate primer that is perfect for external metal structures that are exposed to the elements. Advantages High performance primer and undercoat. First class adhesion. 8-10m²/Litre average. 12-month shelf life.

Price £57.75
In stock

Hydron Nu-Steel Zinc Rich Primer

Nu-Steel Zinc Rich Primer has been specifically-formulated to prime mild steel surfaces to prepare it for overcoating with the finish of your choosing. Steel with low carbon is termed as mild steel, and such uses of this type of steel include: signs, furniture, fencing, cars and structural steel. Advantages Interior and exterior use. 3-5m²/Litre....

Price £66.50
In stock

Carboline Polyclad 777R

A high performance, 100% solids structural polyurethane designed to repair Polyclad 777 or 777 PL when it has been damaged. Top Features Low temperature cure Quick cure to handle Superior wetting properties and outstanding adhesion to steel Excellent edge retention

In stock

PPG PhenGuard 965

PPG PhenGuard 965, a 2-component high build epoxy coating that can be applied directly to metal, and cured, at temperatures as low as to 5°C (41°F).

Price £548.40
In stock

Carboline Plasite 7159

A water-resistant epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry. Top Features Protects I high temperature demineralized water immersion...

In stock

Carboline Pyroclad X1

A two component, 100% solids epoxy based intumescent coating and designed to provide jet fire and hydrocarbon fire protection for structural elements in industrial, petrochemical, oil and gas, offshore and refining industries. Top Features Full jet fire certification in accordance with ISO 22899 Excellent hydrocarbon pool fire protection...

Price £1,110.00
In stock

Rust-Oleum Mathys Noxyde Pegarust

A rust preventing coating that is the solvent-based version of Rust-Oleum Mathys Noxyde that can be applied by brush, roller or spray in cold temperatures down to 0°C or on damp surfaces by brush, roller or spray.

Price £61.05
In stock

Carboline Phenoline 353

A highly cross-linked epoxy lining with extraordinary overall chemical resistance and versatility. It has a unique blend of resins that make it highly resistant to a variety of aggressive cargos like gasoline, gasoline blends, biodiesel, fuel oils, and others. Top Features Outstanding overall chemical resistance Dense, highly cross-linked...

Price £180.75
In stock

Carboline Phenoline 353 LT

A highly cross-linked epoxy lining with extraordinary overall chemical resistance and versatility. It has a unique blend of resins that make it highly resistant to a variety of aggressive cargos like ethanol, gasolines, gasoline blends, biodiesel, fuel oils, and others. Top Features Outstanding overall chemical resistance Excellent...

Price £180.75
In stock

Carboline CARBO-KIT Carbomastic 18 FC

A heavy duty, high build coating for protection of steel in corrosive environments. It is specially designed for application with brush and roller. Top Features Excellent immersion performance in both fresh and sea water Suitable as a rust preventing coating in ballast tanks Very good abrasion resistance

Price £57.83
In stock