Jotun Penguard Universal is a two component polyamine cured pure epoxy coating that is a fast drying, all year round, high solids, high build product. Jotun Penguard Universal provides excellent corrosion protection as part of a complete coating system and can be used as primer, mid coat, finish coat or as a single coat system in atmospheric and immersed...
1805 High Build Vinyl Finish
A quick drying, vinyl acrylic, anti-corrosive, primer-finish formulated for direct application to degreased galvanised steelwork without the need for a primer.
A quick drying, vinyl acrylic, anti-corrosive, primer-finish formulated for direct application to degreased galvanised steelwork without the need for a primer. Produces a protective, high build, flexible sheen finish in just one coat. Can also be applied to mild steel and offers good protection against weak acids and alkalis.
- Tough and weather resistant
- For interior and exterior use
- Quick drying, high build formula
- Can be applied to bare galvanised steel – no primer required
- Chemical and moisture resistant
- Wide colour range
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Tayo on 14/04/2019|| |
Which of your products is suitable for Telecommunication Tower painting ?
We would require more information on this project to confirm suitability, however Rust-Oleum Mathys Noxyde Pegarust would be good place to start. Please contact our Technical Team on 0113 2455450 (option 2) or [email protected] to discuss further.
|Giles Copeman on 25/11/2018|| |
Hi there, I've a half trailer that has started to lightly that where the half has worn away. Will this be suitable for the rust areas or should I treat it and prime it first? Thanks Giles
When applied to bare (non-galvanised) steel: in common with most single pack primers and primer/finishes, this product is not recommended for extended exterior exposure, or exposure in aggressive or coastal locations, or for immersion. Epoxy primers are preferred for these conditions, we would recommend 1802 Surface Tolerant Epoxy Primer.
International Intergard 345 is a two component, low VOC, high solids, fast curing epoxy primer/finish containing zinc phosphate anti-corrosive pigmentation. Suitable for use as a one or two coat primer/finish coating or as an intermediate over recommended anti-corrosive primers.
Sherwin-Williams Dura-Plate 301K is a solvent-free, surface and humidity tolerant two-pack modified epoxy that can be applied without dew point restrictions and over wet steel surfaces. It is an anticorrosive coating for long service life steel protection that can be used for both immersion and above the waterline service in marine, offshore, construction...
Jotun Jotamastic 87 GF WG is a Wintergrade version of Jotamastic 87 GF to aid application at lower temperatures and provide faster curing times. Jotun Jotamastic 87 GF WG is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids, high build product. Reinforced with glass flakes for improved abrasion and scratch...
A single-component, high performance coating which has outstanding resistance to wet/dry cycling conditions at elevated temperatures. Top Features Prevents corrosion under insulation Aluminium and MiO reinforced inorganic film Continuous temperature resistance to 649°C Very good flexibility Self-priming; single component
Jotun Jotamastic 87 is a two component epoxy mastic coating for repair and maintenance. The product is surface tolerant, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity.
A metal primer with surface tolerant properties, can also be used as an intermediate coat, or self-priming finish over steel and zinc primers. Top Features Ready to apply after mixing Economical fit for use epoxy Used as a primer, intermediate, or finish coat VOC compliant to current AIM regulations
Rust-Oleum CombiColor Original is the ultimate direct to metal paint, providing years of protection in minutes: Apply to bare, manually derusted or ready primed mild steel Over 400 colour options including RAL, BS & NCS Primer and metal topcoat in one Interior/exterior use Sag resistant - leaves no brush/roller strokes Use...
An all-purpose immersion-grade epoxy that can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Top Features Low temperature cure (20°F) Excellent corrosion protection Excellent application characteristics Fast recoat times
Self-priming and suitable for application over most existing coatings, and tightly adherent rust. Serves as stand-alone system for a variety of chemical environments and is also designed for various immersion conditions. Top Features Excellent chemical resistance Surface tolerant characteristics Self-priming and primer/finish...
A weldable pre-construction inorganic zinc primer for shop use only. Designed to protect steel during construction phase of projects under normal conditions. Top Features Weld spatter does not adhere to or damage the coating Dries to touch and to handle in 3 to 5 minutes Flat finish
This versatile coating provides an impenetrable film for severe exposures in marine, offshore, petrochemical, pulp and paper and other aggressive environments. Top Features Excellent abrasion resistance Excellent chemical resistance Outstanding impermeability Single coat, self-priming capabilities
A solvent free, low temperature cure, high performance epoxy lining designed to handle common cargoes in the oil and gas industry including crude oil, gasoline, jet fuels, and diesel. It is resistant to NGL condensates, produced water, brines, and industrial process water and can handle deionized water up to 82°C. Top Features Excellent...
Carboline Plasite 4660 provides outstanding chemical resistance, abrasion and corrosion protection to a wide variety of steel and concrete substrates in aggressive environments at elevated temperatures. This product is available as POA. Click here to email us for more information. Top Features Solvent free Excellent chemical resistance...
Jotun Pilot ACR is recommended for refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures. An easy to use one component acrylic finish coat with special features to help your painting schedule become more effective. Pilot ACR features direct-to-metal (DTM), high build and fast drying properties,...