Cromadex 680 Two Pack Polyurethane Matt Primer Finish is a two pack matt primer finish; the high quality resin and curing agent help to produce excellent long term colour stability. The product contains zinc phosphate giving added corrosion resistance for greater durability. It is available in a wide range of colours, including BS, RAL, and special...
|Superior Paint &powder Coatings ltd on 25/05/2017|| |
Question: what are the mixing ratios for this accelerator with chemflake special white also can you use it with peroxide do you have to use peroxide with this product can it be used along side accelerator 9802P What are the mixing ratios for 9802P
Only additives approved by Jotun must be used with Jotun Chemflake Special. Mixing ratios and how to use the products can be found in the TDS (Technical Data Sheet) and Application Guide available to download from the 'DATASHEETS' tab on the Chemflake Special product page.
A winter grade epoxy coating for application at temperatures down to 0°C. Two-pack, glossy epoxy coating for metal, walls and floors. The most efficient epoxy system providing a very hard coating with high layer thickness for lasting results even with a single coat application.
Provides a tough hard-wearing film over steel, non-ferrous metals, concrete, asphalt and more. Supplied in black, Bradite Bitumen Coat/Finish will bring superb water-repellent properties to the substrate. Advantages Only one coat required High build coating Confirms to BS 3416 and BS 6949, Type 1 Class A
A high quality, high build, general purpose gloss paint for use on a wide range of suitably prepared surfaces such as wood, metal, asbestos, stable felt and more, available in a wide range of colours.
Jotun Jotamastic 90 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. This Jotun product is tintable in a wide range of colours and is specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments...
Jotun Hardtop Smart Pack is a two component chemically curing modified acrylic coating that does not contain isocyanates. It has a gloss finish with good gloss retention and can be used direct to metal. It has a 1:1 mixing ratio for easy use and reduced wastage and is specially designed for application with brush and roller.
Jotun Peroxide 11 is a specially developed additive for Jotun Chemflake Special and Jotun Chemflake CV products - refer to each product data sheet for further information. Alternatively speak to our Technical Department at Rawlins Paints for help and advice prior to purchase.
Jotun Jotamastic 87 Alu provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub zero surface temperatures.
Jotun Jotamastic 90 White B16 WG is a 'Wintergrade' version of Jotun Jotamastic 90 White B16 to aid application in lower temperatures and to provide faster drying and curing times. It is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build.
Jotun Baltoflake is a glass flake reinforced unsaturated polyester coating. This Jotun product is an ultra high build, extremely abrasion resistant and fast curing barrier coating that can be used as primer, mid coat or finish coat in atmospheric and immersed environments.
International Interseal 670HS (Winter Grade) is supplied with a winter grade curing agent to enable more rapid cure at lower temperatures. The product is still a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel and a wide range of...
Cromadex 683 Two Pack Polyurethane Eggshell Primer Finish is a two pack eggshell primer finish; the high quality resin and curing agent help to produce excellent long term colour stability. The product contains zinc phosphate giving added corrosion resistance for greater durability. Cromadex 683 is available in a wide range of colours, including BS, RAL,...
Jotun Conseal Touch-Up is a one component physically drying acrylic coating with a matt finish. Manufactured by Jotun, this is a high build product that is fast drying and can be used direct to metal. Ideal as a primer/topcoat in atmospheric environments, it can be applied at sub zero surface temperatures.