Jotun Peroxide 1
  • Jotun Peroxide 1

Jotun Peroxide 1

Jotun Peroxide 1 is a specially developed additive for Jotun Baltoflake and Jotun Chemflake Special products - refer to each product data sheet for further information.

Size
£27.90
VAT excluded

£33.48 Tax incl.
Quantity

Description

Jotun Peroxide 1 is a specially developed additive for Jotun Baltoflake and Jotun Chemflake Special products - refer to each product data sheet for further information.

Product Details
Attachments
Download

Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Jotun Jotamastic 90 White B16 WG

Jotun Jotamastic 90 White B16 WG is a 'Wintergrade' version of Jotun Jotamastic 90 White B16 to aid application in lower temperatures and to provide faster drying and curing times. It is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build.

Price £243.95
In stock

International Interseal 670HS (Winter Grade)

International Interseal 670HS (Winter Grade) is supplied with a winter grade curing agent to enable more rapid cure at lower temperatures. The product is still a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel and a wide range of...

Price £106.59
In stock

Jotun Jotamastic 87 Alu

Jotun Jotamastic 87 Alu provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub zero surface temperatures.

Price £41.85
In stock

Rust-Oleum 9100 High Solids Epoxy

A higher solids, better coverage and lower VOC content product than the standard 9100 Epoxy. Two-pack, glossy epoxy coating for metal, walls and floors. The most efficient epoxy system providing a very hard coating with high layer thickness for lasting results even with a single coat application.

Price £108.16
In stock

Carboline Carboguard 690 GF

A glass-flake filled, cold cure epoxy having excellent film strength and resistance to water, salt water and wastewater exposures. Can be used on a variety of surfaces including structural steel, piping, pilings, ships, offshore structures and other equipment exposed to industrial or marine environments. Top Features High solids, low VOC...

Price £282.38
In stock

Sika Poxitar F

Sika Poxitar F is an epoxy-anthracene oil-combination heavy duty coating for steel and concrete. Sika Poxitar F is tough hard, heavy duty, abrasion and impact resistant and has excellent resistance to water and chemicals.

Price £225.23
In stock

International Intertuf 16

International Intertuf 16 is a one component, high build cold applied bituminous coating for use as an economical coating ideally suited for the protection of interior steel surfaces in enclosed areas such as tanks for storage of sea water, immersed piping and structural steelwork.

Price £32.49
In stock

Jotun Pilot ACR

Jotun Pilot ACR is recommended for refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures. An easy to use one component acrylic finish coat with special features to help your painting schedule become more effective. Pilot ACR features direct-to-metal (DTM), high build and fast drying properties, and cures down...

Price £40.37
In stock

Carboline Carboguard 893

A high solids corrosion resistant primer or intermediate coat over steel and inorganic zinc primers. Top Features Excellent corrosion protection Good abrasion resistance Cures down to 40°F

Price £70.13
In stock

Jotun Hardtop Flexi

Jotun Hardtop Flexi is a high solids (64% volume) polyurethane topcoat with excellent wetting and adhesion properties. Hardtop Flexi has a remarkable ability to resist impact and will maintain initial gloss level over extended periods. This is one of the few products that contain anti-corrosive pigments for the best direct to metal performance.

Price £59.49
In stock

Jotun Jotamastic 90 White B16

Jotun Jotamastic 90 White B16 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. It has been specifically developed to meet the requirements of UK Highway Agency Item 116 for use on bridges and highway infrastructure.

Price £229.20
In stock

Cromadex 683 Two Pack Polyurethane Eggshell Primer Finish

Cromadex 683 Two Pack Polyurethane Eggshell Primer Finish is a two pack eggshell primer finish; the high quality resin and curing agent help to produce excellent long term colour stability. The product contains zinc phosphate giving added corrosion resistance for greater durability. Cromadex 683 is available in a wide range of colours, including BS, RAL,...

Price £129.94
In stock

Jotun Jotamastic 87

Jotun Jotamastic 87 is a two component epoxy mastic coating for repair and maintenance. The product is surface tolerant, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity.

Price £46.85
In stock

Carboline Carboguard 878

A high-build epoxy mastic coating used for atmospheric exposed and submerged steel. Top Features Excellent film build and edge protection Surface tolerant characteristics Cures at low temperature

Price £255.00
In stock

Jotun Jotamastic SF WG

Jotun Jotamastic SF WG is a 'Wintergrade' version of Jotun Jotamastic SF to aid application in lower temperatures and to provide faster drying and curing times. Jotun Jotamastic SF WG is a two component polyamine cured epoxy mastic coating that is a surface tolerant, solvent free, high build product. Well suited for early immersion.

Price £166.08
In stock

Rust-Oleum Mathys Noxyde Peganox

A water based, low VOC, single component, elastomeric coating that provides rust-proofing, corrosion and waterproofing protection optimized for brush or roller application.  It forms an anti corrosive membrane that has a high resistance to water, salt spray, acid and aggressive environments making it virtually unaffected over time.

Price £40.83
In stock