Jotun Jotamastic 87 Alu WG
Jotun Jotamastic 87 Alu WG is a 'Wintergrade' version of Jotamastic 87 Alu to aid application in lower temperatures and to provide faster drying and curing times. Jotun Jotamastic 87 Alu WG is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product that is aluminium pigmented for improved barrier effect.
Jotun Jotamastic 87 Alu WG is a 'Wintergrade' version of Jotamastic 87 Alu to aid application in lower temperatures and to provide faster drying and curing times. Jotun Jotamastic 87 Alu WG is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product that is aluminium pigmented for improved barrier effect. Specially designed for areas where optimum surface preparation is not possible or desired.
Jotun Jotamastic 87 Alu WG provides long lasting protection in environments with high corosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub zero surface temperatures.
General: Primarily designed for maintenance and repair.
Marine: Outside hulls, exterior and interior areas, including water balast tanks.
Protective: Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Approvals and certificates
- Low flame spread class 1, BS 476, Part 7, 1971. Warrinton Fire reasearch, Naval Eng, Stand 713: Isue 3
- Grain, Newcastle Occupational Health
Additional certificates and approvals may be available on request
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close