Jotun Jotamastic 90 White B16
  • Jotun Jotamastic 90 White B16

Jotun Jotamastic 90 White B16

Jotun Jotamastic 90 White B16 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. It has been specifically developed to meet the requirements of UK Highway Agency Item 116 for use on bridges and highway infrastructure.

Colour
Size
Finish
£229.20
VAT excluded

£275.04 Tax incl.
Quantity

Description

Jotun Jotamastic 90 White B16 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. It has been specifically developed to meet the requirements of UK Highway Agency Item 116 for use on bridges and highway infrastructure.

Jotun Jotamastic 90 White B16 is specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corosivity and can be used as a primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments.

Jotun Jotamastic 90 White B16 is suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces. It can be applied at sub zero surface temperatures.

Areas of Use

General: Primarily designed for maintenance and repair.

Marine: Outside hulls, exterior and interior areas.

Protective: Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

Approvals and certificates

  • Approved to meet the requirements of UK Highway Agency Item 116 for use on bridges and highway infrastructure.
  • Low flame spread certificate acording to IMO FTPC Part 
  • Grain, Newcastle Ocupational Health
  • Approved for PSPC for Crude Oil Tanks acording to IMO Res. MSC 288(87)
  • NORSOK System 1, Rev.5

Additional certificates and approvals may be available on request.

Features & Benefits

  • Short overcoating intervals, improving productivity
  • Robust and user friendly, offering safe application
  • Surface tolerant for maintenance and repair

Improved coating systems efficiency

  • Fast curing 
  • Safe application at wide temperature range 
  • Wide DFT range

Surface Tolerant

Specially designed for areas where optimum surface preparation is not possible or desired, and therefor ideal for maintenance & repair.

Durable solution in harsh environments

Excellent film formation on pitting rust and aged coatings

Solutions

  • Direct to metal
  • As midcoat on zinc primers
  • Immersed service

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Application
Brush, Roller, Spray
Coverage
6.4m² per litre
Touch Dry
4 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Jotun Jotamastic SF

Jotun Jotamastic SF is a two component polyamine cured epoxy mastic coating that is a surface tolerant, solvent free, high build product. Well suited for early immersion and specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity.

Price £155.70
In stock

Coo-Var Hammercote Hammered Finish

Coo-Var Hammercote Hammered Finish is a fast-drying coating which gives a hard, hammered gloss finish to metal objects. ADVANTAGES Direct to prepared metal or suitable primer Full hardness is reached after several days Very fast drying Also available in smooth finish Heat resistant up to 150°C 10 colours!

Price £17.70
In stock

Rust-Oleum Mathys Noxyde

Rust-Oleum Mathys Noxyde is a single pack, water-based elastomeric coating with unequaled corrosion protection designed for spraying, offering 15 years of protection with excellent waterproofing and elasticity. ADVANTAGES Unrivalled corrosion protection and waterproofing Approved for corrosion class C5-M high (ISO 12944) Excellent edge...

Price £43.08
In stock

Carboline Plasite 9060 LT

A high performance tank lining with curing characteristics allowing the coating to be applied and cure at temperatures as low as 35°F (2°C) while achieving unmatched chemical resistance in caustic, acid, solvent and ethanol service. Formulated for use in a large variety of facilities including waste water, chemical and fuel storage, wet-gas...

In stock

1805 High Build Vinyl Finish

A quick drying, vinyl acrylic, anti-corrosive, primer-finish formulated for direct application to degreased galvanised steelwork without the need for a primer. 

Price £58.22
In stock

Carboline Polyclad 956

A solvent-less, high gloss, smooth epoxy coating for the lining of gas transmission pipelines. It’s hard, smooth surface aids in the flow of gas by reducing turbulence while protecting the interior surfaces from corrosion. Tested in accordance with API RP 5L2 for gas transmission pipelines. Top Features Improves flow efficiency in gas...

In stock

Carboline Carboguard 635

An all-purpose immersion-grade epoxy that can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Top Features Low temperature cure (20°F) Excellent corrosion protection Excellent application characteristics Fast recoat times

Price £208.13
In stock

International Interbond 1202UPC

International Interbond 1202UPC (Universal Pipe Coating) is the universal pipe coating that reduces specification complexity and project costs. Suitable for protecting above-ground piping and accessories in new construction process plant operating at temperatures between -196ºC (-321ºF) to +650ºC (1202ºF).

Price £1,316.25
In stock

International Interzone 954BG

International Interzone 954BG is a two component, low VOC, high solids, modified epoxy barrier coating that will continue to cure when immersed in water and has excellent cathodic disbondment resistance. Specifically designed to provide long term steel protection via brush or roller application techniques where the performance of Interzone 954 is required...

Price £103.49
In stock

Carboline Polyclad 767

A high performance pipe coating specially designed for the protection of pipeline interiors. Typical application could be pipeline interiors for water transmission. Top Features Fast curing rate increases throughput Superior wetting properties Meets AWWA C222 UL approved for ANSI/NSF Std. 61 potable water This product is available as...

In stock

Jotun Jotacote Universal

This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend Jotun Jotacote Universal N10 as a great alternative. Jotun Jotacote Universal is a two component amine cured pure epoxy coating that is a fast drying, abrasion resistant, high solids and high build. Designed as an universal, all round,...

Price £146.72
In stock

Jotun Norpol Accelerator 9826

Jotun Norpol Accelerator 9826 (formerly known as Jotun Accelerator DMA10) is a specially developed additive for Jotun Chemflake Special and Jotun Chemflake CV products - refer to each product data sheet for further information.

Price £30.31
In stock

Sherwin-Williams Dura-Plate UHS

Sherwin-Williams Dura-Plate UHS is a fast curing solvent free epoxy lining coating which rapid return to service and high build, edge retentive properties of tank lining provides superior protection compared to conventional approaches or alternative products. Dura-Plate UHS is the user friendly solution for use in tanks containing a wide range of contents...

Price £258.39
In stock

Zinga Zingaluspray

Zingaluspray, a cross between the original Zingaspray and Aluspray in a handy 500ml aerosol spray can for touching up and repairing galvanising. Containing more aluminium flakes for a galvanised look, the spray still contains 92% Zinc in the dry film and provides cathodic protection to ferrous metals. Very economical - ideal for small...

Price £194.64
In stock

Carboline CARBO-KIT Carbothane 133 HG

A high build, glossy metal finish that has outstanding weathering and corrosion resistance and colour retention. Suitable for application over a number of Carboline primers and intermediates. Top Features Two-component aliphatic polyurethane. Extremely suitable for use in chemical industries. Gloss finish RAL & BS colour shades

Price £62.24
In stock

Rust-Oleum CombiColor

Rust-Oleum CombiColor Original is the ultimate direct to metal paint, providing years of protection in minutes: Apply to bare, manually derusted or ready primed mild steel Over 400 colour options including RAL, BS & NCS Primer and metal topcoat in one Interior/exterior use Sag resistant - leaves no brush/roller strokes Use...

Price £15.75
In stock