Sika Poxitar F
  • Sika Poxitar F

Sika Poxitar F

Sika Poxitar F is an epoxy-anthracene oil-combination heavy duty coating for steel and concrete. Sika Poxitar F is tough hard, heavy duty, abrasion and impact resistant and has excellent resistance to water and chemicals.

Colour
Size
£225.23
VAT excluded

£270.28 Tax incl.
Quantity

Description

Sika Poxitar F is an epoxy-anthracene oil-combination heavy duty coating for steel and concrete. Resistant 2-pack reaction hardening coating of low solvent content based on an epoxy-anthracene oil-combination with mineral fillers.

Uses:

  • Protective coat for concrete and steel
  • Internal and external coating for buried and submerged structures, e.g. sewage systems, chemical industry etc.
  • Suitable where application onto damp concrete is inevitable.
  • Not suitable for surfaces in contact with drinking water, housing, stables etc.

Features & Benefits:

After complete curing Sika Poxitar F is:

  • Tough hard, heavy duty
  • Abrasion and impact resistant
  • Excellent resistance to water and chemicals

Sika Poxitar F can be exposed to water immediately after application. But take into consideration that solvents get into the water which leads to temporary contamination. Immediate exposure to water should therefore only be considered in special cases and after consulting the authorities for the protection of environment.

For more details please download the product data sheet from the 'DATASHEETS' tab above.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Application
Brush, Roller, Spray
Coverage
3.25m² per kg
Touch Dry
12 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Carboline Carboguard 635 VOC

An all-purpose immersion-grade epoxy that has a variety of attributes including low-temperature cure, surface tolerance and fast recoat times. Can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Top Features Excellent corrosion protection Excellent application characteristics Fast...

Price £208.13
In stock

Carboline Carbomastic 18 FC Metallic

A heavy duty, high build coating for protection of steel in corrosive environments. Carbomastic 18 FC Metallic is excellent for use at low temperatures. Top Features Excellent immersion performance in water. Suitable as a rust preventing coating in ballast tanks. Ideal for areas prone to condensation. Very good abrasion resistance.

Price £252.00
In stock

Carboline Thermaline 4700 Aluminum

A single package silicone finish and high-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1000°F (204°C-538°C). Top Features Resistant to severe thermal shock Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers

Price £64.50
In stock

Jotun Inhibitor 51

Jotun Inhibitor 51 is a specially developed additive for Jotun Baltoflake - refer to the product data sheet for further information.

Price £22.01
In stock

Carboline Carboguard 890

Self-priming and suitable for application over most existing coatings, and tightly adherent rust. Serves as stand-alone system for a variety of chemical environments and is also designed for various immersion conditions. Top Features Excellent chemical resistance Surface tolerant characteristics Self-priming and primer/finish...

Price £74.63
In stock

Jotun Jotamastic 90 GF WG

Jotun Jotamastic 90 GF WG is a 'Wintergrade' version of Jotamastic 90 GF to aid application in lower temperatures and to provide faster drying and curing times. It is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high solids, high build product. It is reinforced with glass flakes for improved abrasion...

Price £213.76
In stock

Jotun Penguard Pro

Jotun Penguard Pro is a two component amine cured epoxy coating that is a surface tolerant, fast drying, high solids, high build product specially designed as a universal, all round, all year, new construction coating. This Jotun Paints product can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed...

Price £45.46
In stock

Carboline Thermo-Lag 3000-SP

A two component, 95% solids epoxy based intumescent coating for the fire protection of structural steel. Designed to fireproof steelwork for up to a 4 hour fire rating. Top Features UL listed - for both interior and exterior environments Durable finish Thin film coating VOC compliant Easy repair

Price £882.30
In stock

Jotun Pilot ACR

Jotun Pilot ACR is recommended for refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures. An easy to use one component acrylic finish coat with special features to help your painting schedule become more effective. Pilot ACR features direct-to-metal (DTM), high build and fast drying properties,...

Price £40.37
In stock

Jotun Jotamastic 90 WG

Jotun Jotamastic 90 WG is a 'Wintergrade' version of Jotamastic 90 to aid application in lower temperatures and to provide faster drying and curing times. It is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. This product is tintable in a wide range of colours.

Price £55.50
In stock

PPG NovaGuard 4801

PPG NovaGuard 4801 is a two-component, glass-flake reinforced novolac vinyl ester high-performance coating for new or old steel. Its excellent resistance to chemicals at high temperatures and (in)organic acids make it ideal for high temperature immersion, and can be used over the of Novaguard 4701 on concrete. 2-part system (Mixing ratio by...

Price £608.00
In stock

Zinga

Zinga is a one-component anti-corrosion zinc coating system that provides cathodic protection to steel comparable with hot-dip galvanising, with the added advantage that it can be applied as though it were a paint, and is certified to not spread flame or create smoke (BS476 parts 6&7). Can protect longer than hot-dip galvanising (at the...

Price £18.90
In stock

Jotun Marathon 500

A surface tolerant from Jotun that is a high build epoxy coating suitable for environments with very high corrosivity, such as areas in the splash or tidal zones. Jotun Marathon 500 is a two component polyamine cured epoxy coating. It's a surface tolerant, high solids, high build product that will continue to cure even when immersed in water.

Price £214.50
In stock

Carboline Carboguard 60

A high solids and abrasion resistant coating which can be used as a primer, intermediate coat, or self-priming finish over steel or inorganic zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. Top Features Low odor and low VOC Good chemical resistance Used as a primer, intermediate, or finish...

Price £250.50
In stock

Carboline Carbomastic 18 NT

A heavy duty, high build coating for protection of steel in corrosive environments. Gives a hard and smooth surface with excellent flexibility. Top Features Excellent immersion performance in water. Suitable as a rust preventing coating in ballast tanks. Ideal for areas prone to condensation. Very good abrasion resistance.

Price £250.50
In stock

Jotun Peroxide 1

Jotun Peroxide 1 is a specially developed additive for Jotun Baltoflake and Jotun Chemflake Special products - refer to each product data sheet for further information.

Price £27.90
In stock