Perfect for when you need a dead black matt surface. Its non-reflective finish makes it ideal for all interior surfaces such as old beams, panelling, decorative ironwork, stage scenery and darkrooms. To be used on wood and metal.
International Intercryl 525
International Intercryl 525 is designed for use as a primer/finish for structural steel, in a wide variety of general industrial environments of light to moderate corrosivity, including on bridges, commercial buildings, infrastructure and manufacturing plants. It exhibits excellent colour and gloss retention.
International Intercryl 525 is a VOC compliant, single component, water based anti-corrosive primer/finish based on weather resistant acrylic copolymer technology. International Intercryl 525 is designed for use as a primer/finish for structural steel, in a wide variety of general industrial environments of light to moderate corrosivity, including on bridges, commercial buildings, infrastructure and manufacturing plants. It exhibits excellent colour and gloss retention.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 6.3m² per litre
- Touch Dry
- 30 mins
- Brush, Roller, Spray
Be the first to ask a question about this product!
Cromadex 690 Two Pack Polyurethane Gloss Primer Finish is a two pack gloss primer finish; it is a high build finish making it suitable for blasted steel. The product contains zinc phosphate giving added corrosion resistance for greater durability.Cromadex 690 is available in full Cromadex range of colours, including BS, RAL, and special matches all in a...
Cromadex 680 Two Pack Polyurethane Matt Primer Finish is a two pack matt primer finish; the high quality resin and curing agent help to produce excellent long term colour stability. The product contains zinc phosphate giving added corrosion resistance for greater durability. It is available in a wide range of colours, including BS, RAL, and special...
Jotun Baltoflake Ecolife is a one component styrene free glass flake reinforced unsaturated polyester coating. This ultra high build, extremely abrasion resistant and fast curing barrier coating from Jotun is ideal for offshore environments, including splash zones, jetties, piles, tidal zones, decks, battery rooms, power stations, etc.
Jotun Hardtop Flexi is a high solids (64% volume) polyurethane topcoat with excellent wetting and adhesion properties. Hardtop Flexi has a remarkable ability to resist impact and will maintain initial gloss level over extended periods. This is one of the few products that contain anti-corrosive pigments for the best direct to metal...
A Wrought Iron effect maintenance paint by Rust-Oleum for metal with superior metal protection from their CombiColor product range. This CombiColor paint topcoat and primer in one, and can be applied direct to rust. It will provide excellent rust protection to metal, wood and steel surfaces.
Sherwin-Williams Macropoxy C88 is a high performance, 2-pack multi purpose tolerant epoxy with resistance to moisture, solvents, acids, abrasion, alkalis, weather and more.
PPG Dimetcote 9, an anticorrosive primer for structural steel that can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), with good resistance to impact and abrasion. 2 component anti-corrosion primer Moisture-curing zinc (ethyl) silicate coating for structural steel Withstands substrate temperatures from –90°C...
Jotun Penguard Pro is a two component amine cured epoxy coating that is a surface tolerant, fast drying, high solids, high build product specially designed as a universal, all round, all year, new construction coating. This Jotun Paints product can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed...
SikaCor 6630 High Solid is a versatile, high-build coating for steel and galvanizing, non-ferrous metals, plastic and timber. SikaCor 6630 High Solid is a low-solvent, oxidative drying high-build coating with active corrosion protection pigments based on modified synthetic resin combination.
A high performance immersion-grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures. It is typically used on hot steel substrates under insulation operating continuously up to 400°F/204°C. Top Features Continuous temperature resistance to 204°C Very good flexibility Acceptable for use...