Nu-Flame HB Metal Primer is ideal for priming cast iron and structural steel in preparation to apply the Nu-Flame Fire Retardant System for metals. Advantages Quick dry. Ideal for cast iron and structural steel. 8m²/Litre coverage. 3 colours available. 12-month shelf life.
International Intercure 99
As a single coat polyaspartic primer finish, International Intercure 99 can replace two coat systems for ISO 12944 C3 environments. Drying hard in 1½ hours at 25ºC (77ºF), International Intercure 99 can increase productivity, reduce VOC levels and provide anti-corrosive protection with long lasting aesthetics.
International Intercure 99 polyaspartic technology is applied as a single coat at 150-250 microns (6-10 mils) direct-to-metal using standard application equipment, reducing application time and labour costs compared to two coat applications in moderately corrosive environments (up to C3, ISO 12944-2).
International Intercure 99 is a low VOC, high solids, rapid cure primer/finish, offering excellent anticorrosive protection and long term colour and gloss durability – a combination that cannot be achieved with alternative fast cure, single coat primer finishes.
International Intercure 99 may also be specified as a high build, durable intermediate/finish over approved anticorrosive primers for more aggressive environments, i.e. ISO 12944 C4 and C5M.
International Intercure 99 is intended for use as a single coat high performance finish. For structural steel applications, a reduced number of coats aids in yard throughput and productivity. Rapid cure and early handling properties make it ideal for applications such as wind towers, transformers, mining equipment and pumps where productivity and drying space are of prime importance.
Features & Benefits:
- High solids polyaspartic
- Single coat direct to metal application for ISO 12944 C3 environments
- Satisfies ISO 12944 C4 and C5 environments with a suitable primer
- Rapid cure maximizes fabrication throughput
- Fast forming abrasion resistance enables early handling and minimizes damages
- Available in a wide range of colors via the Chromascan® mixing scheme
- Excellent long term aesthetic performance
- Low temperature cure down to 5ºC (41ºF)
- HAPS free formulation
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 4.6m² per litre
- Touch Dry
- 30 mins
Be the first to ask a question about this product!
A low-temperature and rapid curing primer/finish with an extended recoat window. Provides excellent corrosion resistance as a primer, intermediate or finish on steel substrates. Top Features Low temperature cure characteristics. Rapid handling for in-shop applications. Low yellowing compared to other epoxies. VOC compliant to current...
Everbuild 901 Black Bitumen Paint is a solvent based, full bodied black bitumen paint, When dry, the product forms an odourless and taint free bitumen film suitable for the protection of metals, concrete roofing, felt, fibre cement, corrugated iron, asphalt and wood against water attack.
A high performance direct-to-metal silicone/polyurethane alkyd finish. Perfect for the protection and decoration of ferrous metals in many home projects such as fencing, gates and other ironmongery. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004 Advantages Outstanding application properties Excellent exterior...
A high solids and abrasion resistant coating which can be used as a primer, intermediate coat, or self-priming finish over steel or inorganic zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. Top Features Low odor and low VOC Good chemical resistance Used as a primer, intermediate, or finish...
A water based, low VOC, single component, elastomeric coating that provides rust-proofing, corrosion and waterproofing protection optimized for brush or roller application. It forms an anti corrosive membrane that has a high resistance to water, salt spray, acid and aggressive environments making it virtually unaffected over time.
A winter grade epoxy coating for application at temperatures down to 0°C. Two-pack, glossy epoxy coating for metal, walls and floors. The most efficient epoxy system providing a very hard coating with high layer thickness for lasting results even with a single coat application.
Jotun Jotamastic 80 WG (Wintergrade) is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids product. Specially designed for application at lower temperatures to facilitate faster curing times on areas where optimum surface preparation is not possible or desired.
Coo-Var Hammercote Smooth Finish is a fast drying coating giving a smooth gloss finish to metallic objects. ADVANTAGES Durable Full hardness reached after several days Interior/Exterior use Heat resistant up to 150°C Very fast drying Rust resistant Apply direct to metal or primer
A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Top Features Excellent overall chemical resistance to a wide range of solvents Very good abrasion resistance and flexibility Complies with FDA 21CFR 175.300 criteria for food contact
Zingaluspray, a cross between the original Zingaspray and Aluspray in a handy 500ml aerosol spray can for touching up and repairing galvanising. Containing more aluminium flakes for a galvanised look, the spray still contains 92% Zinc in the dry film and provides cathodic protection to ferrous metals. Very economical - ideal for small...
Jotun Marathon 1000 GF is a two component polyamine cured epoxy coating. It is a high build, solvent free, glass flake reinforced product. It has very good impact and abrasion resistance. Suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. Can be used as primer, mid coat, finish coat or as single coat system in...
A high solids, high-build potable water coating widely used for lining interior steel and concrete tanks, valves and pipes. Top Features Excellent film build and edge protection VOC compliant to current AIM regulations Gloss finish Self-priming
An air-dried coating available in colours and suitable for high temperature exposures up to 525°F (273°C). Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Top Features Temperature resistance up to 273°C Air-dried curing capabilities Excellent resistance to thermal...
Jotun Conseal Touch-Up is a one component physically drying acrylic coating with a matt finish. Manufactured by Jotun, this is a high build product that is fast drying and can be used direct to metal. Ideal as a primer/topcoat in atmospheric environments, it can be applied at sub zero surface temperatures.
Provides a tough hard-wearing film over steel, non-ferrous metals, concrete, asphalt and more. Supplied in black, Bradite Bitumen Coat/Finish will bring superb water-repellent properties to the substrate. Advantages Only one coat required High build coating Confirms to BS 3416 and BS 6949, Type 1 Class A