Coo-Var Hammercote Hammered Finish is a fast-drying coating which gives a hard, hammered gloss finish to metal objects. ADVANTAGES Direct to prepared metal or suitable primer Full hardness is reached after several days Very fast drying Also available in smooth finish Heat resistant up to 150°C 10 colours!
International Interplus 880
International Interplus 880 is a low VOC, two component high solids flexible aliphatic surface tolerant polyurethane primer, intermediate or finish capable of producing high build films. Primarily for use as a high performance single coat industrial maintenance coating to upgrade any tightly adhering existing coating to a longer life durable system.
International Interplus 880 is a low VOC, two component high solids flexible aliphatic surface tolerant polyurethane primer, intermediate or finish capable of producing high build films.
- International Interplus 880 is primarily for use as a high performance single coat industrial maintenance coating to upgrade any tightly adhering existing coating to a longer life durable system.
- For use in a wide variety of aggressive environments, including those found in chemical plants, refineries, pulp and paper mills and on bridges.
- International Interplus 880 is capable of providing superior gloss and colour retention particularly when compared to epoxy based finishes and will cure at temperatures down to -5°C (23°F).
- May be applied to steel surfaces where it is not possible to abrasive blast.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 8m² per litre
- Touch Dry
- 1 Hour
- Brush, Roller, Spray
|Andrew Bradley on 10/10/2017|| |
Question: What is the best spray unit to use when sparaying Interplus880?
You will find spray application information on page two of the TDS (Technical Data Sheet) which can be downloaded from the 'DATASHEETS' tab on the product page.
The Zinga film galvanising system in the convenience of a 500ml aerosol spray can. Use to repair or touch up galvanising, damaged or old hot-dipped, other zinc coated structures or products previously treated with Zinga in marine structures, new steel and galvanising, cast-iron and aluminium alloys. Repair for worn or damaged hot-dip...
A glass flake-filled coating with dense cross-linking that exhibits excellent overall chemical resistance to a variety of aggressive chemicals. Glass reinforcement provides added abrasion resistance, permeation resistance and internal reinforcement. Top Features Excellent resistance to acids, caustics and solvents. Excellent abrasion...
A hammered finish maintenance paint for metal with superior metal protection, even direct to rust. Rust-Oleum CombiColor Hammertone is a primer and topcoat in one, ideal for various little projects. For a satin, matt or gloss finish, please check out Rust-Oleum CombiColor paint.
An extreme performance coating for hot, cryogenic and cycling exposures. The resulting film Provides an outstanding barrier against corrosives and harsh exposures typically seen in elevated temperature environments. Top Features Unique reinforced but flexible polymer film Versatile use from cryogenic to 650°C exposures Protects steel...
Jotun Jotamastic 80 WG (Wintergrade) is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids product. Specially designed for application at lower temperatures to facilitate faster curing times on areas where optimum surface preparation is not possible or desired.
Part of the high performance, immersion grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures. Top Features Temperature resistant up to 204ºC protects steel substrates Very good flexibility Excellent overall chemical resistance Very good abrasion resistance
Jotun Peroxide 11 is a specially developed additive for Jotun Chemflake Special and Jotun Chemflake CV products - refer to each product data sheet for further information. Alternatively speak to our Technical Department at Rawlins Paints for help and advice prior to purchase.
A heavy duty, high build coating for protection of steel in corrosive environments. Carbomastic 18 FC Metallic is excellent for use at low temperatures. Top Features Excellent immersion performance in water. Suitable as a rust preventing coating in ballast tanks. Ideal for areas prone to condensation. Very good abrasion resistance.
A high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. Top Features Fast curing increases throughput Excellent abrasion resistance Superior wetting...
A water-resistant epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry. Top Features Protects I high temperature demineralized water immersion...
A high quality, high build, general purpose gloss paint for use on a wide range of suitably prepared surfaces such as wood, metal, asbestos, stable felt and more, available in a wide range of colours.
Jotun Jotamastic 90 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. This Jotun product is tintable in a wide range of colours and is specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in...
A corrosion resistant epoxy mastic for steel, offering very good protection against fresh and salt water. Top Features Surface tolerant Fast curing at low temperatures Good coverage
Jotun Jotamastic 90 White B16 WG is a 'Wintergrade' version of Jotun Jotamastic 90 White B16 to aid application in lower temperatures and to provide faster drying and curing times. It is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build.
A heavy-duty primer formulated to provide long term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds. Top Features Good for extended exposure demands Ability to be welded through Heavy-metal free